deli T590 Fingerprint and Password User Manual

**Fingerprint and Password
User Manual
T590/T591**

Welcome to our series products of safes (cabinets) and lock boxes. Please read the instruction manual carefully before use, and operate correctly according to the instructions.

Product unpacking

After opening the packaging box, confirm whether the product appearance is intact and check off all accessories. In case of any loss or damage, please contact the dealer!

Product diagram

case
Serial number| 8| 9| 10| 11| 12| 13|
Name| Knob| Yellow light| Red light| Green light| Fingerprint
area| Digital keys|

Product description

1. Yellow light represents digital input indicator/red tight represents undervoltage indicator/green light represents door opening indicator:
2. Four door opening methods: Key + Knob/ Password +knob / Fingerprint +knob / Password + fingerprint+ knob ;
3. The factory password is 1234;
4. The factory fingerprint is empty (note: when the fingerprint is empty, the door can be opened with any fingerprint):
5. This system has password/fingerprint memory function;
6. It is strongly recommended to change the factory customer password and set the fingerprint before first use:
7. This product con register a total of 30 fingerprints;
8. There is a tong “beep” sound when powered on, with the yellow, red, and green lights blinking simultaneously;
9. When using and registering fingerprints, it is best to tightly press your finger on the fingerprint area to make the finger surface in full contact with the fingerprint orea.

Door opening methods

Method 1 : Insert the key directly into the keyhole on the panel and turn it counterclockwise, then turn the knob clockwise to open the door.
Method 2: Enter 0 3-8 digit password, press the # key, and you will hear “beep” sound twice and the green light is on, then turn the knab to open the door:
Method 3: Enter the correct fingerprint. when you hear “beep” sound twice and the green tight is on, turn the knob to apen the doar;
Method 4: With the dual mode function enabled, enter the correct possword+correct fingerprint, when you hear “beep” sound twice ond the green light is on, turn the knob to open the door.
Note: Method 2,3, 4 requires turing the handle clockwise to open the door within 6 seconds after entering the password and fingerprint.

Change password

After entering the correct password, press the “#” key to confirm, the buzzer will sound “beep “twice. Press the “#” key again within 6 seconds,then the yellow light will tight up. Enter a new 3-8 digit password and press °#” to confirm.the buzzer will sound “beep” twice, indicating that the new possword has been successfully modified.
The initial password of this product is “I234”Please reset your personal password before use to ensure safety.

Register fingerprint

Enter the correct password or fingerprint to open the door and press the reset button(on the back of the safe door) within 30 seconds, then the buzzer will sound “beep twice and the fingerprint area will tight up blue. Then press a new finger on the fingerprint area, ond retease it after the green light is on. A total of five inputs are required [it is recommended to input the same finger from different directions to ensure that the fingerprint collector can collect the lorgest area of fingerprints). When the buzzer sounds a long “beep”, release your finger. Now the fingerprint registration is successful.
Note:

1. If the fingerprint verification fails, and the buzzer sounds “beep’ three times, it indicates that the fingerprint registration has failed;
2. Every time when you register a fingerprint, regardless of success or failure, the registration time is 30 seconds from the completion of one action in the current operation. If the time limit is exceeded, the system will automaticatly return to standby mode.

Jamming code function

When entering a password, you can enter any number of digits in the Front, as long as the last 3-8 digits motch the correct password, it can be pass the verification. (This function is available in both single-opening mode and doul-opening mode).

Restore factory settings

Press the reset button for 3 seconds, and the system will return to the factory settings when the buzzer sounds a long “beep”.

Operation error alarm function

When you enter an incorrect password for three times successively, or enter a wrong fingerprint for five consecutive times, the system will be locked and the buzzer will sound for 1 minute. (During the system lock-up period, any operation is invalid. It will automatically unlock ofter 1 minute.)

Undervoltage alarm function

When the voltage reaches 4.6V (+/-0.2V), after the door opens, it will flash and the buzzer will sound five times, indicating that the battery needs ta be replaced timely.

How to enable single-opening or dual-opening mode

1. How to enter the single-apening mode: Press and hold key “T’, then press the reset button. When you hear a long “beep” sound, it indicates that the system has entered the single-opening mode.
2. How to enter the duol-opening mode: Press and hold key °2”, then press the reset button. When you hear a long “beep” sound, it indicotes that the system has entered the dual-apening mode.

Precautions for use

1. Do not place the User’s Manual, emergency keys, and external battery box in the box, store them in another safe place instead.
2. If the product is not used for a long time, remove the battery to prevent leakage from damaging the electronic system.
3. For the sake of safety, be sure to fix the cabinet on a solid concrete wall.
4. Do not store excessive cash and valuables when no one is on duty or there is no remote alorm device.

Common faults and troubleshooting

No any response when pressing the
digit keys to enter the password| The battery is dead| Open the door with emergency key and replace the battery
Battery polarity reversed| Install the correct  battery way
PCB failure| Please contact the maintenance department
The emergency key cannot be inserted in or removed| Foreign object in the keyhole| Remove foreign objects from the keyhole
The key is not turned to the limit position| Please reinsert in the correct way
The safe door cannot be opened when the electronic combination
has been unlocked| The handle has been turned for more than 7 seconds and the electronic lock has been reset| Reenter the password and rotate handle to the limit within 6 seconds
The alarm does not sound| The battery is dead| Replace the battery
The battery polarity reversed| Install the battery in the correct way

WARRANTY CARD

Dear user,
Thank you for purchasing our products. To ensure the interests of our users, if the products fail due to quality issues, you can contact your local dealer or authorized maintenance station with the invoice and warranty card.
Warranty notice:

1. Within one yeor from the date of purchase, if there is o fault during normal use, our company will provide free maintenance, component replacement, and other services based on the fault condition:
2. This warranty card and purchase invoice are vouchers for the company to provide ofter-sales service to customers. The fotiowing forms in this card must be completed in detail, and shall be valid upon being stamped by the dealer:
3. Under any of the following circumstances, free warranty service is not applicable ond repairs will be charged:
4. Beyond the validity period of the warranty;
5. Damage coused by improper use, maintenance or storage not in accordance with the requirements in the product User’s Manual;
6. Product malfunction or damoge caused by force majeure;
7. Wearing parts or standard accessories.

This card is issued together with the product, one card for each product. In order to ensure that you can fully enjay the free warranty service provided by our company, keep this card properly. and it will not be replaced if lost.
Purchase dote: (mm/dd/yy)
WARRANTY CARD

Product Information| Product Name| | Serial Number|
---|---|---|---|---
Product Model Number| | Manufacturing Date|
Customer Information| Company Name| | Contact|
Address| | Phone|
Sales Information| Dealer Name| | Contact|
Address| | Phone|
Date of Purchase| | Invoice No.|
Maintenance Record| Description of Malfunction| Maintenance Results| Customer
Signature| Maintenance Technician Signature| Maintenance Date
| | | |
| | | |
| | | |

Welcome to use our safe (cabinet) and safe deposit box products. Please read the User’s Manual carefully before use and operate them correctly.

Product Information| Product Name| | Serial Number|
---|---|---|---|---
Product Model Number| | Manufacturing Dote|
Customer Information| Company Name| | Contact|
Address| | Phone|
Sales Information| Dealer Name| | Contact|
Address| | Phone|
Dote of Purchase| | Invoice No.|
Maintenance Record| Description of Malfunction| Maintenance Results| Customer
Signature| Maintenance Technician Signature| Maintenance Date
| | | |
| | | |
| | | |

DELI GROUP CO., LTD.
Deli Industrial Zone, Ninghai County
Ningbo City, Zhejiang Province, China
info@nbdeli.com
www.deliworld.com
Made in China
KEEP FOR
FUTURE USE
Version: 1.0
Date: 05-2024

Documents / Resources

| deli T590 Fingerprint and Password [pdf] User Manual
T590 Fingerprint and Password, T590, Fingerprint and Password, Password
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>