ANKER A1657 MagGo Power Bank User Guide

September 16, 2024
Anker

ANKER A1657 MagGo Power Bank User Guide

Specifications

  • Product Name: Anker MagGo Power Bank (10K, 35W, for Apple Watch)
  • Product Number : A1657 51005004968 V01

Product Usage Instructions

Safety Guidelines
When using the Anker MagGo Power Bank, please adhere to the following safety guidelines:

  1. Do not use an adapter with an output of 5V/1A (5W) or less.
  2. Avoid exposing the device to high temperatures as it can reduce charging speed and power output.

Charging Instructions

  1. Connect the power bank to a compatible power supply using the provided cable.
  2. Ensure the power supply meets the recommended output specifications.
  3. Place your Apple Watch in the designated charging area of ​​the power bank.
  4. Press the power button on the power bank to initiate charging.

Maintenance

To ensure optimal performance and longevity of the power bank, follow these maintenance tips:

  • Regularly clean the charging ports and surfaces with a dry cloth.
  • Avoid dropping or exposing the power bank to water or extreme conditions.
  • Store the power bank in a cool, dry place when not in use.

Do not use an adapter with an output of 5V/1A (5W) or less.
High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless power banks. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.

Important Safety Instructions

When using this product, basic precautions should always be followed:

  1. Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or personal injury.
  2. Operating temperature should be between 0°C to 35°C / 32°F to 95°F.
  3. Do not disassemble this product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or personal injury.
  4. CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
  5. To reduce the risk of injury, close supervision is necessary when the product is used near children.
  6. Do not expose the power bank to rain or snow.
  7. Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
  8. Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause an explosion.
  9. Switch off, deactivate, or unplug the power bank when not in use.
  10. CAUTION: Risk of Fire and Burns. Do Not Open, Crush, or Incinerate. Follow the Manufacturer’s Instructions.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.
    Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
    Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and the receiver.
  3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

  • This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure conditions.
  • The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC

Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973

IC Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Statement

IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure conditions.

Manufacturer: Anker Innovations Limited
Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong

Declaration of Conformity
This product complies with the radio interference requirements of the European Community.
Hereby, Anker Innovations Limited declares that this product complies with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of Conformity is available at the following internet address:
https://support.anker.com/s/articleRecommend?otherType=Anker_EN_Extemal_Manual_and_Download&secondType=doc

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

  • The following importers are the responsible parties (contract for EU and UK matters)
  • Anker Innovations Deutschland GmbH
  • Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd

GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

  • (a) frequency band(s) in which the radio equipment operates;
  • (b) maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

SCANNER

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com

Anker MagGo Power Bank (10K, 35W, for Apple Watch)

  • SAFETY SHEET

FAQ

  • Q: Can I use any adapter to charge the power bank?
    • A: No, it is recommended to use an adapter with an output higher than 5V/1A to ensure efficient charging.
  • Q: How do I know if my Apple Watch is charging on the power bank?
    • A: When properly placed in the charging area of ​​the power bank, your Apple Watch should display a charging indicator.
  • Q: Is the power bank compatible with other smartwatches?
    • A: The Anker MagGo Power Bank is specifically designed for AppleWatch and may not be compatible with other smartwatches. 

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals