BRESSER BR-240B LED Daylight Set Instruction Manual
- September 16, 2024
- BRESSER
Table of Contents
BRESSER BR-240B LED Daylight Set
Product Specifications:
- Model: BR-240B
- LED Daylight Set
- Art. No.: F005118
- Power Supply: 220-240V
Product Usage Instructions
General Warnings
-
* Do not use in the presence of children or animals.
- Store out of reach of children and animals.
…
Parts Overview
- Light stand with Spigot (1a)
- Tripod adapter with Spigot (2a), Spigot adapter (2b)
- Lamp holder with power cable (3a) and mains plug (3b)
- Reflective umbrella with mounting rod (4a)
- LED lamp (5)
Assembly and Operation
- Attach the tripod adapter (2) to the Spigot (1a) of the light stand (1).
- Attach the lamp holder to the Spigot (2a) of the tripod adapter (2).
- Push the reflective umbrella (4) with the fastening rod (4a) through the umbrella holder of the tripod adapter (2) and secure it.
- Screw the LED lamp (5) into the lamp holder (3).
- Insert the mains plug (3b) of the power cable (3a) into the mains socket (220-240V).
Frequently Asked Questions
-
Q: Can I use a different power cable for this device?
- A: No, only use the included power cable for the power supply to avoid voltage damage.
-
Q: What should I do if the device is damaged?
- A: Do not use the device if it is damaged or contains damaged live parts. Contact an authorized service center for immediate replacement of damaged parts.
BR-240B
LED Daylight Set
Art. No. F005118
INSTRUCTION MANUAL
GENERAL WARNINGS
RISK OF PHYSICAL INJURY!
Do not use in the presence of children or animals. Store out of reach of
children and animals.
DANGER OF MATERIAL DAMAGE!
- Make sure that no one can trip over connection cables of the device. The device could be knocked over.
- Only use the included power cable for the power supply!
- The manufacturer accepts no liability for voltage damage caused by the use of unsuitable and/or unauthorized components for the power supply!
DANGER OF AN ELECTRIC SHOCK!
- This unit contains electronic parts that are powered by a power source (mains power). Only use the device as described in the instructions. Otherwise there is a risk of an electric shock.
- Never bend, squeeze or pull power cables, connecting cables, extensions or connectors. Protect cables from sharp edges and heat.
- Check the device, cables and connections for damage before use.
- Do not use the device if is damaged or contains damaged live parts! Damaged parts must be replaced immediately by an authorized service centre.
- Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
RISK OF GLARE!
Make sure that people and animals do not look into the light. The high
luminosity can cause glare to the eyes and afterimages. This impairment of
vision can lead to accidents.
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and ensure
that it is stored in an appropriate safe place.
- Keep children and animals away from the device! They could knock the device over.
- Make sure that no one can trip over connection cables of the device. The device could be knocked over.
- Do not expose the device to high temperatures. Do not short-circuit the device or dispose of it in fire! Excessive heat and improper handling can cause short circuits, fires and even explosions!
- Only use the recommended power supply!
IMPORTANT NOTE!
- Never take the device apart. In the event of a defect, please contact your dealer. They will contact the Service Centre and can arrange the return of this device for repair if necessary.
- Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of a longer interruption of operation and before any maintenance and cleaning work.
- Place your device so that it can be disconnected from the power supply at any time. The power outlet should always be near your appliance and should be easily accessible, as the plug of the power cord serves as a disconnect device from the mains supply.
- To disconnect the unit from the mains, always pull the mains plug and never pull the cable!
- Do not subject the device to excessive vibrations.
PARTS OVERVIEW
- Light stand with Spigot (1a)
- Tripod adapter with Spigot (2a) and Spigot adapter (2b)
- Lamp holder with power cable (3a) and mains plug (3b)
- Reflective umbrella with mounting rod (4a)
- LED lamp
ASSEMBLY AND OPERATION
- Attach the tripod adapter (2) to the Spigot (1a) of the light stand (1). Additionally or alternatively, the Spigot adapter (2b) can be used for mounting.
- Attach the lamp holder to the Spigot (2a) of the tripod adapter (2).
- Push the reflective umbrella (4) with the fastening rod (4a) through the umbrella holder (X) of the tripod adapter (2) and secure it.
- Screw the LED lamp (5) into the lamp holder (3).
- Insert the mains plug (3b) of the power cable (3a) into the mains socket (220-240V).
DISPOSAL
Dispose of the packaging materials according to their type. Observe the
current legal regulations when disposing of the device! Information on proper
disposal can be obtained from municipal waste disposal service providers or
the Environmental Agency.
Do not dispose of electrical appliances with household waste! According to the
European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and
its transposition into national law, used electrical equipment must be
collected separately and recycled in an environmentally sound manner.
WARRANTY AND SERVICE
The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required. You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms .
CE DECLARATION OF CONFORMITY
A “Declaration of conformity” in accordance with the applicable directives
and corresponding standards has been prepared by Bresser GmbH. The full text
of the CE declaration of conformity is available at the following Internet
address:
www.bresser.de/download/F005118/CE/F005118_CE.pdf
Please contact the service centre first for any questions regarding the product or claims, preferably by e-mail.
- E-Mail : service@bresseruk.com
- Telephone *: +44 1342 837 098
BRESSER UK Ltd.
- Suite 3G, Eden Haouse
- Enterprise Way
- Edenbridge, Kent TN8 6HF
- Great Britain
Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.
Bresser GmbH Gutenbergstraße 2 46414 Rhede · Germany
www.bresser.de
@BresserEurope
Bresser UK Ltd.
Suite 3G, Eden House Enterprise Way Edenbridge, Kent TN8 6HF Great Britain
Errors and technical changes reserved.Manual_F005118_BR-240B-LED-Light-Set_en- nl-de_BRESSER_v082024a
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>