TELTONIKA RUT200 Outdoor LTE Wi-Fi Antenna Routers Installation Guide
- September 16, 2024
- teltonika
Table of Contents
TELTONIKA RUT200 Outdoor LTE Wi-Fi Antenna Routers
Product Specifications
- Product: Outdoor LTE/Wi-Fi antenna for RUT2-series routers
- Compatible with: RUT200, RUT240, RUT241, RUT260
- Order Code: PR1IC860
- Manufacturer: Teltonika Networks
Product Usage Instructions
What’s Inside:
- Top cover
- Sealing gasket
- Lower lid
- Mounting hardware (U-bolts, nuts, screws)
- RJ45 socket
- Grounding cable
Antenna Installation:
- Check the label and verify all components.
- Mount the lower lid with the RJ45 socket on the left side, relative to the router’s LAN port.
Mast & Wall Installation:
- Standard mast: Minimum/Maximum diameter 40 – 60 mm (1.57-2.36 inch).
- For wall installation, screws are not included in this product.
Power Supply Installation:
- Standard PoE power supply is supported via LAN1 port. Passive PoE power supply is not included.
Frequently Asked Questions (FAQ)
Q: Does the antenna come with a power supply?
A: No, the antenna does not include a power supply. It supports passive
PoE via LAN1 port.
Q: What is the compatible router series for this antenna?
A: The antenna is compatible with RUT2-series routers including RUT200,
RUT240, RUT241, RUT260.
Outdoor LTE/Wi-Fi antenna for RUT2-series routers RUT200, RUT240, RUT241, RUT260
WHAT’S INSIDE
| 1 | Top cover |
|---|---|
| 2 | Sealing gasket |
| 3 | Lower lid |
| 4 | Mounting |
| 5 | U-bolt M8 part 1 |
| 6 | U-bolt M8 part 2 |
| 7 | RJ45 socket |
| 8 | Grounding cable |
| 9 | M8 nuts |
| 10 | M6 x 10 screw |
| 11 | 3.1 x 12 screw |
ANTENNA INSTALLATION
MAST & WALL INSTALLATION
POWER SUPPLY INSTALLATION
STANDARD POE POWER SUPPLY
Teltonika routers support passive PoE only via their LAN1 port
Please note:
- Teltonika routers are not compliant with the IEEE 802.3af-2003 standard. Powering one via an IEEE 802.3af-2003 power supply will damage the router due to the this standard’s voltage.
- Teltonika routers are not compliant with the IEEE 802.3at standard. They cannot power other devices via Ethernet. They can be powered via any Gigabit passive PoE power supply with a voltage of 9-30 VDC, such as our own power supply:
For power supply, you can use any Gigabit (not Gigabit for RUT series) Passive
PoE power supply with a voltage of 9-30VDC.
You can use, for example, a power supply from our offer: PR323EUB
Passive PoE power supply is not included in this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>