MAXIM LIGHTING UCL-89842 LED Under Cabinet Instruction Manual
- September 17, 2024
- MAXIM LIGHTING
Table of Contents
Item /Model Numbar: UCL-89842
Counterman Lite 8″ LED Under Cabinet 3000K
Lamping |: 1 x LED 4W (Included)
Please consult a qualified electrician prior to install
Made in China
GENERAL 120V INSTRUCTIONS
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not
to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of children.
Chooseaclean, level, spacious assemblyarea. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning,
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire. Check the product cord to be sure s free torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, .. glass
cleaner, stone polish, & wood polish,
Clean with soft cloth and a mild detergent. Do not. use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
PARTS
Before getting started ensure the package contains the following components:
Feed wires back into fixture, reattach adapter plate tighten screw, and attach the fixture to the base of the cabinet, with screws
KNOCK OUT DIAGRAM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>