TELTONIKA RUT200 Outdoor LTE Wi-Fi Antenna For RUT2 Series Routers Installation Guide
- September 14, 2024
- teltonika
Table of Contents
ORDER CODE: PR1IC860
QUICK INSTALLATION GUIDE
Outdoor LTE/Wi-Fi antenna for RUT2-series routers
RUT200, RUT240, RUT241, RUT260www.teltonika-networks.com
WHAT’S INSIDE
| 1 | Top cover |
|---|---|
| 2 | Sealing gasket |
| 3 | Lower lid |
| 4 | Mounting |
| 5 | U-bolt M8 part 1 |
| 6 | U-bolt M8 part 2 |
| 7 | RJ45 socket |
| 8 | Grounding cable |
| 9 | M8 nuts |
| 10 | M6 x 10 screw |
| 11 | 3.1 x 12 screw |
ANTENNA INSTALLATION
MAST & WALL INSTALLATION
POWER SUPPLY INSTALLATION
10a STANDARD POE POWER SUPPLY
Teltonika routers support passive PoE only via their LAN1 port
Please note:
- Teltonika routers are not compliant with the IEEE 802.3af-2003 standard. Powering one via an IEEE 802.3af-2003 power supply will damage the router due to the this standard’s voltage.
- Teltonika routers are not compliant with the IEEE 802.3at standard. They cannot power other devices via Ethernet. They can be powered via any Gigabit passive PoE power supply with a voltage of 9-30 VDC, such as our own power supply:
For power supply, you can use any Gigabit (not Gigabit for RUT series)
Passive PoE power supply with a voltage of 9-30VDC.
You can use, for example, a power supply from our offer: PR323EUB
Passive PoE power supply is not included in this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>