Treevol WHFP077 Floating TV Stand Watson Installation Guide
- September 13, 2024
- Treevol
Table of Contents
WHFP077 Floating TV Stand Watson
“`html
Specifications:
- Wood dowel quantity: 12
- Spreading bolt quantity: 21
- Minifix cam quantity: 21
- Cover caps quantity: 24
- Inset overlay hinge + screws quantity: 4
- Desk Grommet quantity: 1
- Wall anchor + screw quantity: 3
Product Usage Instructions:
What You Will Need:
Hi! My name is Armando, and I’ll be with you while you assemble
this cabinet.
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (e.g., cardboard or rug)
- An electric screwdriver (optional but can make the work
easier)
Where to Start:
This is crucial! Ensure the panel and hardware content for the
cabinet is correct and in good shape before starting assembly.
Hardware Bag Contents:
Be cautious not to lose anything from this bag as its contents
are necessary for assembling your cabinet.
- Wood dowels x12
- Spreading bolts x21
- Minifix cams x21
- Cover caps x24
- Inset overlay hinge + screws x4
- Desk Grommet x1
- Wall anchor + screw x3
How Dowels and Minifix System Work:
Follow these steps when using wood dowels and Minifix system
connectors:
Wood Dowels:
- Put the dowel inside the indicated hole.
- Gently hit it until fully inside to adjust the joint.
Minifix System:
-
Insert the Minifix cam with the arrow pointing towards the
drilling on the panel’s edge. -
Add the spreading bolt with the black plastic part facing
down.
Assembling Steps:
Refer to the manual for a full look at the panels of the cabinet
for detailed assembly instructions.
Fixing Cabinet to the Wall:
-
Drill the bottoms guided by the holes in the structures with a
3/16 drill bit. -
Measure and mark points on the wall, then drill with a 5/16
drill bit. -
Insert wall anchors into the drillings.
-
Place the cabinet and secure it with screws.
FAQ:
Q: What should I do if I’m missing a component from the
hardware bag?
A: If you are missing a component, please contact customer
support for assistance in obtaining a replacement.
“`
ASSEMBLY INSTRUCTIONS
TV SHELF
It’s much better if you get some company for this!
LOT N°
Index
What will you need?
2
Where should you start?
3
What’s in the hardware bag?
4
How do the dowels and Minifix system work?
(We also explain what they are)
5
Let’s start assembling!
6
How much weight does your cabinet resist?
17
Our last recommendations for taking care of your cabinet
18
What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.
Phillips head screwdriver Flat head screwdriver Hammer
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier
🙂
2
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1 E – x2 I – x1
B – x1 F – x1
C – x1 G – x1
D – x1 H – x1
3
What’s in the hardware bag?
Wood dowel
x12
Spreading bolt
x21
Minifix cam
x21
Cover caps
x24
2″1/2
Inset overlay hinge + screws
x4
Desk Grommet
x1
Wall anchor + screw
x3
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet. 4
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
When joining two
1
Put in the dowel
2
inside the indicated
panels together, don’t forget to gently hit
hole and softly hit it
the panels to adjust
until it’s fully inside.
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
1
small arrow
This is a Minifix cam.
3
It has a little arrow on its
upper surface.
This is a spreading bolt. You should put it with the black plastic part facing down.
2
You should insert these cams
with the little arrow pointing towards the drilling on the
4
panel’s edge (shown on the
left).
After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.
5
1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
A
Rotate
A
6
2
B
Flat head screw
B
7
3
A
B
4
F
8
5
A F
B
6
C
9
Flat head screw
C
7
C
A
F
B
10
8
Ex2
9
E
B
F
E
A C
11
10
D
11
D
B
F
E
A
E
C
12
12
B
D
E
A
E
C
13
13 Fix your cabinet to the wall
1 You must drill the bottoms guided by the holes in the structures wiht a
3/16″ drill bit.
2 On the wall, measure and mark the points shown below. 3 Drill on the
markings with a 5/16″ drill bit. 4 Insert the wall anchors inside the
drillings. 5 Place the cabinet and secure it with the screws.
6,9
17,63
17,63
6,9
G
5,7 4,7
*Dimensions in inches
*User defined distance
Floor
14
14 Door Installation
B H
E
D
AE C
I
Follow the adjustment instructions on the next page.
15
15 Hinge adjustment
Depth adjustment
Side adjustment
Height adjustment
A B
A
Screws adjustment
B
Use the settings acourding to the specific need.
After adjusting all the Minifix cams, cover
them up with the cover caps.
A
After finishing the assembly, lift off al the
adhesive letters.
16
How much weight does my cabinet resist?
22
11
11
11
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone. Be specially careful with the kids.
17
Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do
not expose it to the direct sun. Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the
cabinet (only when indicated here). Cdalemapn ictlowtihth. thinner, a soft
soap solution or simply a Don’t drag the cabinet, lift it up with other
people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
F
G D B
E E
H
C A
I
18
WARRANTY POLICY
Furniture has a 1 year warranty coverage in wooden parts and hardware pieces
since its manufacturing date, which you can see in the lot number printed on
the product box and the assembly instructions leaflet. Warranty covers
materials and workmanship imperfections which impair the assembly or correct
functioning of the cabinet. This warranty is not valid if the defects or
imperfections are caused by the incorrect following of the assembly
instructions, warnings and recommendations, misuse, intentional damage, fire
or flood, or after modifications or any kind of alteration, or repaired by
someone not authorized, when it´s been assembled 3 months after the date of
purchase. These defects MUST be reported before the warranty coverage period
ends. Once the product has been assembled, the company will not be responsible
for defective and/or damaged parts. This warranty is ONLY valid for the
ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented,
etc. Furniture will take no liability for incidental or consequential damages
caused to or by the product (This may not apply in your state). To make this
warranty valid you must write to our customer service email describing the
product defect, lot number and submitting your sales reciept or proof of
purchase, or contact us at our customer service line. Replaced parts will be
under the product´s original warranty coverage period. Damaged parts will
become property of the company. There are no other warranties applicable to
this product.
19