Teltonika TFT100 E Mobility Trackers User Guide
- September 13, 2024
- teltonika
Table of Contents
Teltonika TFT100 E Mobility Trackers
INTRODUCTION
- All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.
- If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
- SMS command structure:
- Ypjp=login>
- SMS command getinfo example:
- If you have set SMS login and password: login pass getinfo
- If SMS login and password are not set leave two spaces before command: getinfo
- GPRS commands require Codec 12 protocol.
- Ypjp=login>
Common commands
Bluetooth Commands
Commands Related to Features
CAN Commands
RS485 Super Soco commands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>