Storm Interface Audio Nav EF Config Utility User Guide

September 12, 2024
Storm Interface

Audio Nav EF Config Utility

“`html

Specifications

  • Requires .NET framework on the PC

  • Communicates over USB connection via HID-HID data pipe
    channel

  • No special drivers required

  • Compatible with Windows 11 and Windows 10

Installation

  1. Download the Configuration Utility from
    www.storm-interface.com/downloads

  2. Double click on the downloaded .exe file to launch the Setup
    Wizard

  3. Click on Next

  4. Select “I Agree” and Click on Next

  5. Choose installation for just you or everyone, select location
    if not default, then click Next

  6. Click on Next to confirm

  7. Check Disk Cost to ensure 10MB of space is available

  8. A shortcut will be installed on your desktop

  9. Click Close for successful installation

Using the Utility

Double-click the shortcut on your desktop to start the Utility.
If an AudioNav EF device is connected, it will be detected
automatically, and its details will be displayed in the blue panel
at the top.

Bluetooth Settings

The utility can be used to configure Bluetooth settings. Follow
the on-screen instructions to set up Bluetooth for your device.

FAQ

Q: What are the main functions available in the AudioNav EF

Config Utility?

The main functions available in the utility include:

  • Select a Code table
  • Create a customized code table
  • Change the LED brightness
  • Test the AudioNav EF
  • Update the Firmware
  • Reset the AudioNav EF to factory defaults
  • Configure Bluetooth Touchless settings
  • Reset the AudioNav EF from a saved configuration

“`

AudioNav EF Config Utility

Windows Utility

System Requirements

2

Installation

3

Using the Utility

5

Bluetooth Settings

12

Change History

17

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 1 of 17

AudioNav EF Config Utility

System Requirements

The utility requires .NET framework to be installed on the PC and will communicate over the same USB connection but via the HID-HID data pipe channel, no special drivers are required.

Compatibility

Windows 11

Windows 10

The utility can be used to configure the product to

·

Select Code Table

·

LED brightness (0 to 9)

·

Test AudioNav

·

Create customised keypad table

·

Configure Bluetooth settings

·

Reset to factory default

·

Load Firmware

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 2 of 17

AudioNav EF Config Utility
Installing the Configuration Utility
To install the Configuration Utility download from www.storm- interface.com/downloads, double click on the downloaded .exe file and the Setup Wizard will launch

Click on “Next”

Select “I Agree” and Click on “Next”

Select if you would like to install for just you or everyone and select location if you do not want to install at default location. Then click on “Next”

Click on “Next” to confirm.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 3 of 17

AudioNav EF Config Utility
The “Disk Cost” shows available space at your chosen folder. The program requires 10MB of space.

A shortcut will be installed on your desktop.

Click on “Close” for successful installation.

Double-click this to start the Utility and the following screen will appear. If an AudioNav EF device is connected it will be detected automatically and the details displayed in the blue panel at the top

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 4 of 17

AudioNav EF Config Utility

The following functions are available and will be described on the following pages :Select a Code table Create a customised code table Change the LED brightness Test the AudioNav EF Update the Firmware Reset the AudioNav EF to factory defaults Configure Bluetooth Touchless settings Reset the AudioNav EF from a saved configuration

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 5 of 17

AudioNav EF Config Utility

Select a Code Table
The user can select from three tables:

Right

Function

FACTORY DEFAULT CODE TABLE
Hex USB Description
0x4F Right Arrow

ALTERNATE CODE TABLE

Hex

USB Description

CUSTOMISED CODE TABLE
Set initially to the factory default values

Left

0x50

Left Arrow

Down

0x51 Down Arrow

Up

0x52

Up Arrow

Select

0x28

Enter

Jack IN

0x6A

F15

Jack OUT

0x6B

F16

Increase Volume Decrease Volume Increase Playback Speed Reduce Playback Speed

01 02

Windows

01 04 Multimedia Codes

0x72

F23

0x73

F24

Once a table has been selected then the keypad will hold that configuration unless it is disconnected.

Once the keypad has been disconnected that configuration will be lost unless you save the configuration in memory by clicking on “Save Changes”

SELECT

SAVE

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 6 of 17

AudioNav EF Config Utility
Create a Custom Code Table
First select Customise Table Note that Multimedia Control Codes ( Vol Up / Down ) are not available in Customised Table. Please note: JACK IN/OUT and Horizontal/Vertical codes can also be customised.
SELECT
Click on `Customise Code table. The following will be displayed

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 7 of 17

Choosing a USB Code
The current customised code table will be displayed from memory on the keypad.
Attached to each key is another button (“NONE”), this shows the modifier for each key. To customize a key, click on the key and Key Code combo box will appear, with “Select Code” . The button colour will change to “Orange”

AudioNav EF Config Utility

Now press on the down arrow on the combo box: This will display all the codes that can be selected.
These codes are the ones defined by USB.org.
Once code is selected, the code will be displayed on the selected button.

In this example I have selected “e” and code is represented by 0x08 and button colour will change to Aqua.
Press the “Apply” button and the code will be sent to the AUDIONAV EF. When you press key “Down” on keypad, “e” will be sent to the relevant application.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 8 of 17

AudioNav EF Config Utility
Adding a modifier
Now if you wanted a “E” (uppercase) then you need to add a SHIFT modifier for that key. Click on the modifier
button for that key.
SELECT

The background colour for modifier button will change to orange and modifier combo box will appear. Select down arrow key on modifier combo box and the following selection will be available:

L SHT ­ Left Shift L ALT ­ Left Alt L CTL ­ Left Ctrl L GUI ­ Left Gui R SHT ­ Right Shift R ALT ­ Right Alt R CTL ­ Right Ctrl R GUI ­ Right Gui

NONE
SELECT

Select either L SHT or R SHT ­ I have selected R SHT.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 9 of 17

AudioNav EF Config Utility
The R SHT modifier is now displayed on the button and background colour changed to grey. Now if you click on “Apply” and if successfully transferred then pressing “down” on keypad will display “E” (uppercase).

If you did not want the current setting then click on “Reset” then all buttons will revert to original coding and then click on “apply” to send this coding to AudioNav EF keypad. “Close” will exit the customize form and return back to main screen.
Press “Save Changes”
PRESS TO SAVE

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 10 of 17

LED Brightness
This will set the brightness of the LEDs. The selection is from 0 to 9. LEDs in Audio Nav EF can be configured differently when the jack is in or out

AudioNav EF Config Utility

JACK OUT JACK IN
In addition, there are 3 separate lighting zones
ZONE 2

ZONE 1

ZONE 3

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 11 of 17

AudioNav EF Config Utility

Touchless Settings
If the AudioNav includes Bluetooth then with the utility you can :-.
· Enable / disable bluetooth functionality · Rename the device ­ this name appears when connecting. · Product Type can be set to Landscape / Portrait · Enable / disable Trackpad in the Touchless-CX app. · Adjust the Bluetooth operation range

The Bluetooth range is set by a combination of
– Transmit power level (from the AudioNav) – RSSI level (as seen in the Touchless-CX app) – Signal strength drop (as seen in the Touchless-CX app).

The signal strength is monitored by the Touchless-CX app :-

· It looks for Storm Bluetooth devices · If it detects one and the RSSI level is greater than the level set then it will connect · It records the initial signal strength on connection · The signal strength will decrease when the user walks away from the kiosk · When the signal strength drops by the figure set in RSSI Disconnect margin
and remains low for 10 seconds then the app will automatically disconnect.

The factory default settings give an effective range of 1.5m. They are as follows

RSSI level range (for initial connection) 75 dbm
Transmit Power level 1.5 dbm RSSI Disconnect Margin 5 dbm

If you increase this figure (e.g to 85 dbm) the range will increase
If you increase this figure the range will increase
If you increase this figure then you will need to move further away from the kiosk to initiate automatic disconnection

If Bluetooth has been disabled then you can re-enable it without using the utility
· Press and hold for 5 sec the 3 buttons shown (Press and hold 1, then also 2, then also 3)
· The LEDs will flash to confirm Bluetooth is enabled

3

2 1

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 12 of 17

Test the AudioNav
This will test all the functions :-.
· illumination dimming levels · Key test · Jack in/out · H/V Switch · Audio test

AudioNav EF Config Utility
PRESS TO START TEST

First test the audio (make sure it is set as the default audio device).

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 13 of 17

Now press each key on keypad, each key will light up on screen.

AudioNav EF Config Utility

Press close when finished.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 14 of 17

Update the Firmware

AudioNav EF Config Utility

Press YES
BROWSE for the file press UPGRADE and CLOSE

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 15 of 17

Reset the AudioNav EF to Factory Defaults
Clicking on “Factory Default” will reset the keypad to factory settings Code Table ­ Default LED brightness ­ 9

AudioNav EF Config Utility

Reset the AudioNav from a saved Configuration

You can load the saved settings onto another AudioNav.
This is useful (for example) you have set up a customised table and you wish to load this table on a number of devices

PRESS TO RESET

Press to reset to load the saved settings from the previous device onto the device that is currently connected

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 16 of 17

Change History
Instructions for Config Utility

AudioNav EF Config Utility

Date 15 Aug 24

Version 1.0

Details First release (split out from Utility + API doc)

Configuration Utility

Date 14 Jun 19 06 Jan 21 01 Feb 22 12 Sep 22
06 Mar 24

Version 1.0 2.0 2.1 4.0
6.0

Details First Release Bug fix ­ added missing dll files & microphone test Update user license agreement BLE functions added Added support for Volume UP/Volume Down in customise code

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd., Copyright 2018. All rights reserved.

AudioNav EF – Config Utility Rev 1.0

www.storm-interface.com

Page 17 of 17

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals