Storm Interface 1600 Series USB Navigation Keypad Instruction Manual

September 13, 2024
Storm Interface

1600 Series USB Navigation Keypad

Specifications

  • Product Name: 1600 Series USB Navigation Keypad
  • Configuration Utility Version: Rev 1.0 Aug 2024
  • Manufacturer: Keymat Technology Ltd.
  • Compatibility: Windows 11, Windows 10
  • Interface: USB
  • Required Software: .NET framework

Product Usage Instructions

Installing the Configuration Utility

  1. Download the utility from www.storm-interface.com.

  2. Click on setup.exe and follow the instructions below:

  3. Click on Next.

  4. Select “I Agree” and click on Next.

  5. Select installation preferences (for just you or everyone),
    choose installation location if needed, then click on Next.

  6. Click on Close for successful installation.

  7. A shortcut will be installed on your Desktop. Double-click to
    launch the application.

Using the Configuration Utility

The utility communicates over the USB connection via the HID-HID
data pipe channel. No special drivers are required. It can be used
to configure the following features:

  • Right Arrow – Hex Code: 0x4F
  • Left Arrow – Hex Code: 0x50
  • Down Arrow – Hex Code: 0x51
  • Up Arrow – Hex Code: 0x52
  • Select/Enter – Hex Code: 0x28

Device Detection and Status

The utility will detect the keypad using the VID/PID. If
successful, all buttons will be enabled. If not, only Scan and Exit
buttons will be enabled.

FAQ

Q: Do I need special drivers to use the keypad configuration

utility?

A: No, the utility communicates over the USB connection via the
HID-HID data pipe channel, and no special drivers are required.

Q: How can I launch the application after installation?

A: A shortcut will be installed on your Desktop. Double-click
the shortcut to launch the application.

Q: What features can be configured using the utility?

A: The utility can be used to configure features like right
arrow, left arrow, down arrow, up arrow, and select/enter with
their respective hex codes.

Q: What operating systems are compatible with the configuration

utility?

A: The utility is compatible with Windows 11 and Windows 10.

1600 Series USB Navigation Keypad Configuration Utility

USB Codes
The Configuration Utility can be used to :· Control LED On/Off and brightness (0 to 9) · Customise USB output codes · Reset to factory default values · Retrieve serial number · Update device firmware

Function
Right Left Down Up Select

OUTPUT CODES

(STANDARD TABLE)

Hex

USB Description

0x4F

Right Arrow

0x50

Left Arrow

0x51 Down Arrow

0x52

Up Arrow

0x28

Enter

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 1 of 14

1600 Series USB Navigation Keypad Technical Manual

Installing & Using the Configuration Utility
The host application requires .NET framework to be installed on the PC and will communicate over the same usb connection via the HID-HID data pipe channel, no special drivers are required.

Windows OS Windows 11, Windows 10

Compatibility Works OK Works OK

The utility can be used to configure the following features:
· LED On/Off · LED brightness (0 to 9) · Load customised keypad table · Write default values from volatile memory to flash · Reset to factory default · Load Firmware

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 2 of 14

1600 Series USB Navigation Keypad Technical Manual
To install the utility, download from www.storm-interface.com , click on the setup.exe and follow the instructions as below:
Click on “Next”

Select “I Agree” and Click on “Next”

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 3 of 14

1600 Series USB Navigation Keypad Technical Manual

Select if you would like to install for just you or everyone and select location if you do not want to install at default location. Then click on “Next”

Click on close for successful installation.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 4 of 14

A shortcut will be installed on your Desktop

1600 Series USB Navigation Keypad Technical Manual

Double-click to launch the application
The utility will initially detect the keypad using the VID/PID and if found it sends a device status message. If all successful then all the buttons are enabled. If not then they will all be disabled except for “Scan” and “Exit”.

Each of the functions available is described on the following pages.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 5 of 14

1600 Series USB Navigation Keypad Technical Manual
Help
Clicking on the ‘help’ button opens a dialogue box. This dialogue box gives information about the version of the Configuration Utility installed.

Customise Keycode Table
The user can select from three tables: Default Table Alternate Table Customise Table Once a table has been selected then the keypad will hold that configuration until it is powered down. Once the keypad has been disconnected that configuration will be lost. To save the configuration in flash click on “Save Changes”

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 6 of 14

1600 Series USB Navigation Keypad Technical Manual

LED Brightness This will set the brightness of the LEDs. The selection is from 0 to 9.

Test Keypad
The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 7 of 14

1600 Series USB Navigation Keypad Technical Manual
This will test all the functionality of keypad. · Sequence the illumination over all dimming levels · Key test
Click On “Test Keypad”

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 8 of 14

1600 Series USB Navigation Keypad Technical Manual
Customise Keycode
The uer can only enter into this menu if ‘Customise Navigation Keypad Code Table’ is selected. The following will be displayed when “Customise code” is clicked.

The utility will scan the keypad and extract the current customized code and display the key code on the individual keys. Attached to each key is another button (“NONE”), this shows the modifier for each key. To customize a key, click on the key and the Key Code combo box will appear, with “Select Code”.
Now press on the down arrow on the combo box:

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 9 of 14

1600 Series USB Navigation Keypad Technical Manual
The Customise Keypad Code Table displays the codes that can be selected.. These codes are the ones defined by USB.org. Once a code is selected, it will be displayed on the selected button. In this example I have selected “d” and the code is represented by 0x7.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 10 of 14

1600 Series USB Navigation Keypad Technical Manual

If the “Apply” button is selected, the code will be sent to the keypad and if you press UP key on keypad “d” should be sent to the relevant application. Now if you wanted a “D” (uppercase) then you need to add a SHIFT modifier for that key. Click on the modifier button for that key.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 11 of 14

1600 Series USB Navigation Keypad Technical Manual
The background colour for modifier button will change to orange and modifier combo box will appear. Select down arrow key on modifier combo box.

The following selection is available:
NONE L SHT ­ Left Shift L ALT ­ Left Alt L CTL ­ Left Ctrl L GUI ­ Left Gui R SHT ­ Right Shift R ALT ­ Right Alt R CTL ­ Right Ctrl R GUI ­ Right Gui
Select either L SHT or R SHT ­ I have selected L SHT.

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 12 of 14

1600 Series USB Navigation Keypad Technical Manual

The L SHT modifier is now displayed on button and background colour changed to grey. Now if you click on “Apply” and if successfully transferred then pressing Up on keypad should display “D” (uppercase).
If you did not want the current setting then click on “Reset” then all buttons will revert to original coding and then click on “apply” to send this coding to NavigationKeypad keypad.
“Exit” will exit the customize form and return back to main screen.
Save Changes
All configurations, including the customized table is modified in volatile memory. So if after modifying and the user switches off the keypad then next time the encoder is powered on, it will revert back to previous configuration data. To save the modified data in non volatile memory, click on “Save Changes” button.
Factory Default
Clicking on “Reset To Factory Default” will set the keypad with values that are preset, i.e. NavigationKeypad ­ default table LED brightness ­ 9

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 13 of 14

1600 Series USB Navigation Keypad Technical Manual

Version Information
Instructions for Configuration Utility

Date 15 Aug 2024

Version 1.0

Details Introduced ­ split out from Tech Manual

Configuration Utility

Date
4 Dec 16 19 Jan 21 02 Feb 21

Version
2.0 3.0 3.1

Details
Introduced Updated to not overwrite sn when loading saved configuration New user license agreement

———— END OF DOCUMENT ————-

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is confidential and is not to be used for any purpose or disclosed to any third party without the express and written consent of Keymat Technology Ltd., Copyright 2015. All rights reserved.

1600 Series USB Navigation Keypad Configuration Utility Rev 1.0 Aug 2024

www.storm-interface.com

Page 14 of 14

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals