nVent CADDY CCC0187 Cushion Clamp Insulated Strut Clamp Owner’s Manual
- September 12, 2024
- nVent Caddy
Table of Contents
nVent CADDY CCC0187 Cushion Clamp Insulated Strut Clamp
Specifications:
- Catalog Number: CCC0187
- Article Number: 598903
- Material: Steel; Polypropylene
- Finish: Zinc Chromate
- Outer Diameter (OD): 47.6 mm
- Pipe Size: 1 1/2
- NB/DN: 40
- Width (W): 39.7 mm
- A: 59 mm
- B: 81.5 mm
Product Usage Instructions
Installation:
- Ensure the surface where the clamp will be installed is clean and free of any debris.
- Place the clamp around the pipe/tube and position it at the desired location.
- Secure the clamp using appropriate fasteners according to the provided guidelines.
Maintenance:
- Regularly check the clamp for any signs of wear or damage.
- Clean the clamp as needed to maintain its performance.
Safety Precautions:
- Always follow nVent’s product instruction sheets and training materials for proper installation.
- Avoid overloading the clamp beyond its specified capacity.
- Do not use the clamp for purposes other than its intended application.
FAQ:
-
Q: Can this clamp be used for outdoor applications?
A: Yes, this clamp can be used for outdoor applications as long as it is installed correctly and maintained properly to withstand outdoor conditions. -
Q: What is the maximum pipe size this clamp can accommodate?
A: This clamp is designed for pipes/tubes with an outer diameter of 47.6 mm and a size of 1 1/2 inches (DN 40).
CATALOG NUMBER
- CCC0187
FEATURES
- Fits into open side of strut channel
- Plastic cushion is hinged to spread apart for easy installation
- Reduces noise and absorbs shock by gripping the pipe/tube firmly
- Square neck of carriage bolt prevents over-tightening
- Nylon locknut prevents loosening under vibration
- FM® Specification Tested (from 3/8″ to 4″ of Copper Tube Size)
PRODUCT ATTRIBUTES
- Article Number: 598903
- Material: Steel;Polypropylene
- Finish: Zinc Chromate
- Outer Diameter (OD): 47.6 mm
- Pipe Size: 1 1/2″
- NB/DN: 40
- Width (W): 39.7 mm
- A: 59 mm
- B: 81.5 mm
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands: +31 800-0200135
France: +33 800 901 793
Europe
Germany: 800 1890272
Other Countries: +31 13 5835404
APAC
Shanghai: + 86 21 2412 1618/19
Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
nVent.com
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>