Hunter FS-3000 Field Server Installation Guide
- June 12, 2024
- Hunter
Table of Contents
FS-3000 Field Server
Installation Guide
Field Server
INSTALLATION GUIDE
FS-3000 and FS-1000
FS-3000 Field Server
Hunter Field Server Installation Guide
The field server can be installed anywhere with the host network, including
near a Hunter controller enclosure.
Field servers can also be rack mounted in a central network location.
- Install the field server with the standard DIN rail connector.
- Connect to the server with the “Eth1” RJ-45 port. (The “Eth2” is for WAN use, if applicable.)
- Connect the field server power with the supplied power connector. This can either be 9 – 30 VDC, or 24 VAC.
Install the
Ethernet communication module for the controller (A2CLAN or A2CWIFI for ACC2,
WIFIKIT or LANKIT for ICC2).
Connect the Hunter LAN/Wi-Fi module to the network. Once the Hunter controller
and the field server are connected to the same network, you can log in and
finish setting up the field server.
Accessing a Gateway Through the Web Interface
Make sure the computer’s IP address is in the same subnet mask as the gateways. To do this, navigate to the computer’s Settings > Network & Internet
Change adapter options.
-
Open the browser.
-
Type in the IP address of the field server/gateway. The default address is: 192.168.2.101.
-
Continue with HTTP.
Note: This can be changed later. -
Enter the default username: admin
-
Enter the password. This can be found on the back of the gateway.
-
Choose HTTP and press Save.
Note: This can be changed later to increase security.
Notes About Passwords:
- Lower case Ls appear as a line “|”
- Upper case Ls appear as the roman numeral “I”
- The number one appears as “1”
- You can scan the QR code for the password
For complete support and documentation, visit the Hunter Industries website using the QR code below.
hunterindustries.com/support/fs-3000-support
Helping our customers succeed is what drives us. While our passion for innovation and engineering is built into everything we do, it is our commitment to exceptional support that we hope will keep you in the Hunter family of customers for years to come.
Denise Mullikin, President,
Landscape Irrigation and Outdoor Lighting
HUNTER INDUSTRIES | Built on Innovation®
1940 Diamond Street, San Marcos, CA 92078 USA
hunterindustries.com
© 2023 Hunter Industries Inc. Hunter, the
Hunter logo, and other marks are trademarks of Hunter Industries Inc.
registered in the U.S. and certain other countries. Please recycle.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>