anko YF-KM-23X02 24 LED Solar Novelty Christmas String Lights Instructions

anko YF-KM-23X02 24 LED Solar Novelty Christmas String Lights

Specifications

• Model: YF-KM-23X02
• Product Name: 24 LED Solar Novelty Christmas String Lights

Product Information

The 24 LED Solar Novelty Christmas String Lights are designed to add a festive touch to your outdoor space. These lights are powered by solar energy, eliminating the need for external power sources.

Usage Instructions

1. Remove all packaging before use and dispose of safely.
2. Do not position or place near barbecues, heaters, or any other direct sources of heat.
3. Locate the solar panel where sunlight can directly fall on it to charge the batteries.
4. During the day, the solar panel charges the batteries. At night, the stored energy powers the lights.
5. The duration the lights stay on depends on the sunlight received during the day.
6. Turn the ON/OFF switch at the bottom of the lights to ON position.
7. Place the light set at your desired locations and ensure cables are secured to prevent tripping hazards.

Warnings:
This product may emit a normal warning that can be ignored.

FAQ

• Q: How long does it take to charge the batteries?
  A: The charging time varies depending on the amount of sunlight received, but typically it takes a full day of sunlight to charge the batteries fully.

• Q: Can the lights be used indoors?
  A: These lights are designed for outdoor use where they can receive direct sunlight for charging. Indoor use may not provide sufficient sunlight for optimal performance.

K : 43447343
T : 70027341

24 LED SOLAR NOVELTY CHRSTMAS STRING LIGHTS

Model No.: YF-KM-23X02

Instructions

1. Remove all packaging before use and dispose of safely.
2. Do not position or place near barbecues, heaters, or any other direct sources of heat.
3. The solar panel should be located where sunlight can fall directly on the panel. Shadows from buildings, trees, walls/hedges and similar objects should be avoided if possible as these will reduce performance.
4. Try to avoid locations where light from other sources (e.g. streetlights, floodlights etc) may affect the PIR sensor. The light are designed only to illuminate in dark conditions and may not operate if light reflects on the panel.
5. The light can be left outside in rain but should not be exposed to water jets or immersed. For optimum life, the solar panel should be stored indoors during extreme weather conditions (prolonged snow and frost).
6. The solar light consists of a solar cell, a rechargeable battery and LED lights. All these are preassembled. During the daytime, light from the sun charges up the batteries. At night, the energy stored in the batteries is used to power the light. No other power or connections are required. The length of time the light stays on is dependent on how much sunlight has been received during the day.
7. Turn the ON/OFF switch at the bottom to “ON”.
8. Place the light set at the desired locations. Ensure the cables are anchored so that they do not present a tripping hazard.

Warnings

• The light set is designed for use OUTDOOR ONLY.
• Remove all packaging before use.
• This product is not a toy, keep out of reach of children and pets.
• This product has small parts, which may pose a choking hazard if detached.
• The battery is non-replaceable. DO NOT attempt to replace it.
• The light set is constructed with non-replaceable bulbs. DO NOT attempt to replace any of the bulbs in the light set.
• Keep away from fire and sources of heat.
• Do not allow water to come into contact with the batteries or wiring.
• Some condensation may form inside the unit or solar panel in cold conditions. This is normal and can be ignored.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>