BRAUN GS 7077 Handheld Garment Steamer Instruction Manual

September 11, 2024
Braun

BRAUN GS 7077 Handheld Garment Steamer

Please read the safety instructions (separate booklet) carefully and completely before using the appliance. Our products are engineered to meet the highest standards of quality, functionality, and design. We hope you thoroughly enjoy your new Braun appliance.

Before use

Please read the user instructions carefully and completely before using the appliance

Description

  1. Soleplate
  2. Steam button
  3. On/Off button
  4. Steam indicator light
  5. Power cord/storage
  6. Removable water tank
  7. Release button (water tank)
  8. Brush
  9. Descaling slider (only Series 7)
  10. Steam lock button (only Series 7)
  11. Door hook (only Series 7)

QuickStyle 7

(A) Filling the water tank

Make sure the appliance is plugged off. If you have extremely hard water, we recommend that you use 50% tap water and 50 % distilled water. Do not use condensation water from a tumble dryer.

(B) Before first use

When steam is ready for the first time we recommend pressing the steam button for 1 minute without steaming towards garments.

(C) Start into operation

  • The door hook allows you to hang your garment for steaming. For optimal use, pass the soleplate over your garment from top to bottom.
  • You can also use an ironing board for treating your garments.
  • The brush opens the weaves of the fabrics for better steam penetration.

Caution
Beware that the escaping steam becomes up to 100°C degrees hot.

  • Do not aim the steam directly towards your hands.
  • Do not steam into your face.
  • Do not steam into the direction of your body.

(D) Continous Steam (only Series 7)
For your convenience, you can lock the steam button and steam the garments without pressing the steam button all the time.

(E) Auto Off (only Series 7)

This function is activated if after 5 minutes there has been no steam emission. The appliance goes into standby mode and shows a fading light. After additional 5 minutes, the appliance turns off.

(F) Descaling (only Series 7)
To maintain optimum performance, the appliance needs to be decalcified regularly. We recommend once per month. Be sure to close the slider after the descaling process has been finished otherwise steam could come out. Never open or touch the slider when the appliance is hot and plugged in.

(G) Care and Cleaning
Before Cleaning always make sure that the appliance is unplugged and has cooled down completely.

Warranty and Service

For detailed information see the separate warranty and service leaflet or visit www.braunhousehold.com. Both the design specifications and these user instructions are subject to change without notice.

Troubleshooting Guide

PROBLEM SOLUTION

Water droplets drip from the soleplate.

| Place the Garment steamer in an upright position on a flat surface and wait some seconds
The Garment steamer produces a pum- ping sound/the handle vibrates.| This is normal.


Steam does not come out from the sole- plate.

| Unplug the Garment steamer and refill the water tank. After switched ON, wait until the heat up time is completed and then press the steam button for 10 seconds.
Insert the water tank properly.
Water leaks from the water tank.| Ensure that the filling hole is closed pro- perly.
Steam indicator light does not work.| Contact an authorized Braun Customer Service.
Only for Series 7
The appliance produces less steam.

Impurities come out of the soleplate

| Perform the descaling procedure.
Steam comes out continuously from the soleplate.| Deactivate the “continuous steam” func- tion.



The descaling slider is blocked with scale.

| Perform the descaling procedure more frequently; at least once per month (refer to the dedicated chapter)
Contact an authorized Braun Customer Service.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals