BRAUN 57657 Scouting Cam Black 1300 WiFi User Guide

: October 27, 2023
: Braun

BRAUN

SCOUTING CAM
BLACK1300 WiFi

User Manual

Before installing and using the camera, please read this instruction carefully

1. Introduction

Thank you for choosing one of our products.

1.1 Application

This trail camera is an ideal product for housing security, warehouse surveillance, and monitoring wild animals with its camouflage appearance and nice shape. It is convenient to install or fasten.

A. Instant surveillance camera for home, office, construction site ,and warehouse, etc
B. Motion-triggered infra-red night vision surveillance
C. Animal observation and hunting

1.2 Power Supply

A. AAAlkaline Batteries
This camera can either work with 4 or 8pcs AAAlkaline batteries. Please note that the voltage of rechargeable AA batteries AA batteries (1.2V) is insufficient to power this device. Batteries electrode may cause device malfunction. Also, we strongly recommend changing the batteries when power icon on camera screen is empty.

Do not mix old and new batteries.
Do not mix battery types-use ALL lithium or all alkaline.
Rechargeable batteries are not recommended.

A. Power Adaptor
This camera can also be powered by an external 6V/2A DC adapter. Recommend to remove the alkaline batteries when power adapter is used to avoid surcharging.

1.3 Attention

A.Insert the SD memory card correctly
B.Please use M battery with good quality in order to prevent battery cells from corrosion of leaked add
C. Use right adaptor (6V/2A) of this camera to supply power, and do not invert the electrode when put in batteries.
D. Do not interrupt power supply during system upgrade
E. Do not keep camera next to hot irrelevant objects, air conditioner exhaust vents, and light, etc. to avoid mistaking photos or videos.

1.4 Key Features

13MP CMOS sensor.
40pcs IR LED flash to cover a range of 20 meters.
Adjustable PI R sensitivity.
Impressive quick trigger time: 0.2 sec
Adjustable delay between motions.
4 or 8pcs AA alkaline batteries, stand by 6 months.
Excellent image quality during daytime, transition time and night time.
Time lapse picture or video (Depending on the setting)
No motion blur technology under low light situations at 2 feet per second regular motion speed.
Up to 20 meter flash and detection range.
Camouflage housing cover.
Up to 128GB SD card.
Supports WiFi control and transmission of recordings (via app)
Activation of the WiFi signal via Bluetooth

2. Whole view

Interior

Exterior

Right/left side

Bottom Side

Inter-structure

LCD screen
Menu key
Mode key
Shot key
Battery cover
1/4″ tripod screw thread
Switch key
DC in port
USB port
SD card slot
OK button
Direction key

Switch key| ON gear, the device enters the automatic monitoring and shooting state, and automatically takes photos or videos.
---|---
SETUP gear, users can modify settings, preview, test shot and playback photo and video.
OFF gear, turn off the device.
*MENU key*| Shift to “settings” menu.
MODE key| Switch mode among Video / Photo / Playback.
“SHOT key**| In photo / video mode,take photo/ record video; In playback mode, enlarge photo.
*Direction key| UP/DOWN/RIGHT/LEFT,
•OK key| Confirm the function

Attention: Keys with “*” only work in test mode.

3. Star to use

3.1 Install SD card

Open the latches and front housing , insert the SD card, push it until hearing a “Click” sound.

3.2 Install 4/8 pcs AA Battery

Use 4 pcs or 8 pcs AA battery to power on the device.
A. Open the latches and remove battery cover .
B. Install 8 pcs AA batteries according to the polarity sign on the battery compartment. If only use 4 pcs batteries, please install them in the top or in the bottom of batteries compartments.
C. Close the battery cover.

3.3 Setting the camera – SETUP Gear

Push the SWITCH button to SETUP gear. On this gear, users can modify the settings.

3.3.1 Menu Setting
Press MENU button to enter menu mode, press UP / DOWN button to choose and press OK button to enter submenu.
Under submenu, press UP / DOWN button to choose and press ok button to confirm .
Press MENU button to return to previous menu.

3.4 PIR Mode – ON Gear

Push the SWITCH button to ON gear after finishing setting on SETUP gear. The device will switch to PIR mode 10s later. The device will work according to the saved settings.

Menu	Default setting	Function description
1.Mode	Photo	Photo / Video / Photo & Video
2.Photo resolution	13MP	48/30124/20/16/13/8/5/3 MP
3.Photo series	1 photo	1/2/3/6/7/10 photos
4.Video resolution	1920x1080P	4k@ 10 fps

4 Playback Mode

Photo files and video files recorded by the camera can be played back on the camera. Users can lock, unlock, delete and slide show on the device.

4.1 Playback video/photo

On SETUP gear, press MODE button to enter playback mode, press UP/DOWN button to look through photos and videos. To watch videos, press OK button to play and stop.

4.2 Delete

In playback mode, press MENU to enter sub-menu:
A. Delete current file: Delete this video/photo.
B. Delete all files: Delete all videos/photos.
Press UP/DOWN button to choose A or B and press OK to confirm.

4.3 Slide show

In playback mode, press MENU to enter sub-menu:
C. Activate slide show: photos will display one by one, 3 s/photo.
Press UP/DOWN button to choose C and press OK to confirm.

4.4 Write protect

In playback mode, press MENU to enter sub-menu:
D. Write protect: to protect the files from to be deleted.
Press UP/DOWN button to choose write protect and press OK to enter sub-menu, press UP/DOWN button to choose Write-protect current file / Write-protect all files / Unlock current files / Unlock all file, and press OK button to confirm.

4. Specification lists

Image sensor	Sony 13M Sensor
Lens FOV	90°
IR light / Range	40 pcs IR LED 120 meter
Storage	SD/SDHC card, Max. to 128GB(Class10 or faster)
Photo	Format: JPEG 48/30/24/20/16/13/815/3 MP

5.Trouble Shooting

5.1 Can’t switch on camera.

a. Please check if the batteries polarity is correct
b. Reload the batteries and reboot the camera without SD card.
c. If the above step can’t work, please format pr replace your SD card and try again.

5.2 Picture color abnormal

Turn off the camera and reload the batteries, and try to reboot the camera.

5.3 Camera can’t take picture.

Please check if the SD card is in NON-WRITABLE mode.

5.4 PIR not work

a. Must install SD card.
b. Please check if the space of SD card is full.
c. Please check if the camera in time lapse or delay mode.

BRAUN PHOTO
TECHNIK GmbH
Merkurstr. 8
72184 Eutingen
Germany

[email protected]
www.braun-phototechnik.de

BRAUN Scouting Cam BLACK1300 WiFi

Notes on the WiFi function

You can use a smartphone to connect to the camera via WiFi signal transmitted by the camera. You can set the camera’s settings and download images to the smartphone via App.
App name: “Wildlife Cam Pro” (Android & iOS)

App download:
Search “Wildlife Cam Pro” in Google Play or Apple App store. Download and install the app.
Connection:
Step 1:
Open “Wildlife Cam Pro” app, click “Step One Bluetooth On
WiFi”. Choose the cameras Bluetooth signal: Trail Camera XXXXXX
Alternatively you can press the “UP” button on the keypad of the camera to turn on the WiFi signal.

→ Step One Bluetooth On Wifi →
→ → Step Two Connect Wifi

Step 2:

Connect WiFi. Go to the WiFi settings of your smartphone and connect your smartphone with the cameras WiFi signal (BRAUN-XXXXXX). Enter the password “1 2345878”. Open the “Wildlife Cam Pro” app again and you will see a live view of the camera.

App function:

Camera settings can be adjusted, you can see a live view of the camera, you can manually record photos & videos and you can download the recordings from the SD card to your smartphone.

BRAUN PHOTO TECHNIK GmbH
Merkurstr. 8
72184 Eutingen
Germany
[email protected]
www.braun-phototechnik.de