BRAUN 58186 Magnetic Gooseneck Light Instruction Manual
- October 30, 2023
- Braun
Table of Contents
BRAUN 58186 Magnetic Gooseneck Light
Product Information
This product is a rechargeable work light that operates on a Li-ion 18650 type 3.7V, 2600mAh battery. It has a charging time of 4 hours and can be charged using a USB port. The work light has different modes – Normal and Full Power – and can be turned on and off using a Power Button. The product comes with a Limited 90 Day Warranty.
Product Usage
-
Before using the work light for the first time, fully charge the battery. To charge the battery, follow the below steps:
- Insert the end of the Charging Cable into the Charging Jack, located on the side of the handle, under a cover.
- Plug Charging Cable into a powered USB port.
- The Charging Indicator will blink Green during charging. After approximately 4 hours the Charging Indicator turns solid Green, indicating the Work Light is charged and ready for use. Unplug the Charging Cable.
-
To turn on the work light:
- Press the Power Button once to turn on the light.
- Press the Button again to switch to Normal mode.
- Press the Button a third time to switch to Full Power mode.
- Press the Button a final time to turn the light off.
-
If the light will not turn on, check that the Battery Cap is
tight. The Button may need to be pressed forcefully to turn the
light on. -
When finished using the Work Light, store indoors away from
children. -
To remove the battery:
-
Use a screwdriver to remove 7 screws from the back of the
light. -
Remove 2 screws from the bottom of the light.
-
Remove 2 screws from the PCB board above the battery.
-
Remove battery from housing.
-
The battery must be recycled or disposed of properly.
-
-
Read the Owner’s Manual & Safety Instructions before using this product. Failure to do so can result in serious injury. Keep this manual for future reference.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Specifications
- Input Rating: 5VDC, 1A
- Battery: Li-ion 18650 type 3.7V, 2600mAh
- Charge Time: 4 hours
IMPORTANT SAFETY INFORMATION
WARNING: To prevent serious injury, FIRE, and EXPLOSION:
- Contains Li-Ion battery. Battery must be recycled or disposed of properly. Do not open, crush, heat above 140° F or incinerate.
- Keep dry. Do not open, drop, short-circuit, incinerate, expose to temperatures higher than 140° F, or charge/use if damaged.
- Do not submerge Light.
- People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
- Not a toy. Keep out of reach of children.
Charging Instructions
WARNING: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
- Insert the end of the Charging Cable into the Charging Jack, located on the side of the handle, under a cover. See below.
- Plug Charging Cable into a powered USB port.
- The Charging Indicator will blink Green during charging. After approximately 4 hours the Charging Indicator turns solid Green, indicating the Work Light is charged and ready for use. Unplug the Charging Cable.
NOTICE: Do not leave the Battery in a discharged state. Charge the
Battery every 3 months if the Work Light is not in use. This will keep the
Battery from wearing down and add to its life. Do not charge the Work
Light for more than 4 hours. Overcharging will cause overheating and shorten
battery life. Do not charge the Work Light at temperatures below 40° F.
Operation Instructions
WARNING: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
NOTE: Before using Work Light for the first time, fully charge the Battery.
- Press the Power Button once to turn on the light.
- Press the Button again to switch to Normal mode.
- Press the Button a third time to switch to Full Power mode.
- Press the Button a final time to turn the light off.
- When finished using the Work Light, store indoors away from children.
Note : If the light will not turn on, check that the Battery Cap is tight. The Button may need to be pressed forcefully to turn the light on.
Battery Removal
- Use a screwdriver (sold separately) to remove 7 screws from the back of the light.
- Remove 2 screws from the bottom of the light.
- Remove 2 screws from the PCB board above the battery.
- Remove battery from housing.
- Contains Li-Ion battery. Battery must be recycled or disposed of properly.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This
warranty does not apply to damage due directly or indirectly, to misuse,
abuse, negligence or accidents, repairs or alterations outside our facilities,
criminal activity, improper installation, normal wear and tear, or to lack of
maintenance.
We shall in no event be liable for death, injuries to persons or property, or
for incidental, contingent,
special or consequential damages arising from the use of our product. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation of exclusion
may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase
instead. Replacement parts are not available for this item. Reference UPC
193175503381.
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2022 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
WARNING: Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
Visit our website at: http://www.harborfreight.com
Email our technical support at:
[email protected]
For technical questions, please call 1-888-866-5797.
26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797