PRED CAM S9 Dual Reversing Camera User Guide

September 10, 2024
PRED

CAM S9 Dual Reversing Camera

Product Information

Specifications:

  • Model: CAM S9+
  • Power Button: 1
  • Micro-SD Slot: 2
  • Reset Button: 3
  • Mode Switch: 4
  • USB Port: 5
  • Mic: 6
  • Lens: 7
  • Indicator: 8
  • PIR: 9
  • Light Sensor: 10

Product Usage Instructions:

  1. Power Button: Press this button to turn the
    device on or off.

  2. Micro-SD Slot: Insert a compatible micro-SD
    card into this slot for storage.

  3. Reset Button: Use a small tool to press this
    button to reset the device if needed.

  4. Mode Switch: Use this switch to change between
    different modes or settings.

  5. USB Port: Connect a USB cable to this port for
    charging or data transfer.

  6. Mic: Built-in microphone for audio
    recording.

  7. Lens: The camera lens for capturing images or
    videos.

  8. Indicator: LED indicator that provides status
    information.

  9. PIR: Passive Infrared Sensor for motion
    detection.

  10. Light Sensor: Sensor that detects ambient
    light levels.

Frequently Asked Questions (FAQ):

Q: How do I change the recording mode?

A: Use the Mode Switch (4) to cycle through the
different recording modes available on the device.

Q: What is the purpose of the PIR sensor?

A: The PIR sensor (9) is used to detect motion
and trigger recording or alerts.

Q: How do I know if the device is charging?

A: The Indicator (8) will show a specific light
pattern when the device is charging.

Q: Can I use any micro-SD card with this device?

A: It is recommended to use a high-quality
micro-SD card with sufficient storage capacity for optimal
performance.

CAM S9+

7 10
8 9
6

2

1. Power Button

3

2. Micro-SD Slot

3. Reset Button

4. Mode Switch

5. USB Port

1 6. Mic

7. Lens

8. Indicator

5

4

9. PIR

10. Light Sensor

Step by step guide:

-Download the App “Fowl” (for Apple iPhone) or “O-Kam pro” (for all other brands using Android). Skip this step if you have already downloaded either App. Follow the App instructions to install the App, when installed close the App. Note:”Fowl” will only work for Apple iPhone/iPad, “O-Kam pro” will work for all devices (Android) and iPhone as well. -If you have a Micro-SD card, insert it in the Micro-SD Slot (2) Plug the Camera to charge (5) using the provided Micro USB cable. Turn the camera on (1) and the mode switch (4) to Wifi. Press the reset button of the Camera (3) -On your phone, open the Wifi settings and wait until “OK-xxx” appears (this can take up to 30 seconds) and select it (even if it says connected but no Internet, it is OK, if prompted about Wifi Always connectlect). -Wait another 30 seconds and then open the App “Fowl” or “O-Kam pro”.

Apple iPhone: “Fowl” App: -After opening the “Fowl” App, Press Play to watch the live view of your camera. -Configure your Wifi by pressing the gearshift icon (upper right corner) to open the app settings. -Select Wifi Settings and Select your Home Wifi from the list and type your password and confirm. Now press the play button to view the live feed. Congrats you have set up your new TOKKTM CAM. Check out all the functions of the camera and the App on our website in the Support page: www.tokktech.com/support

All Others: “O-Kam pro” App: -After opening the “O-Kam pro” app, Press Play to watch the live view of your camera. -On the next message Select: “Connect the device to the internet”. -Select your Home Wifi from the list and type your password and confirm. -The message “Network configuration successful connection” (it can take up to 1 minute) will appear, Select: Confirm. Now press the play button to view the live feed. Congrats you have set up your new TOKKTM CAM. Check out all the functions of the camera and the App on our website in the Support page: www.tokktech.com/support/

www.Tokktech.com

service@predtechnologies.com

Tel +1 858 999 2114

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals