LOREX AJLZ Series Silicone Plug Instruction Manual
- September 11, 2024
- Lorex
Table of Contents
AJLZ Series
What’s Included
Tools Needed
Drill
Installation
Install in an area that can support the total weight of the camera and junction box.
-
Use the Allen key to loosen the screws and open the junction box.
-
Remove the four screws with the Allen key to detach the back bracket.
-
Optional Customization Install a converter, air circuit breaker, standard socket, surge protectors, and a power adapter. Note: The products mentioned and shown above are not included.
-
Optional Customization Use a screwdriver to remove any unused trays inside the junction box.
-
Drill holes in the wall and install the back bracket with expansion bolts.
-
Lower the junction box onto the back bracket.
-
Tighten the screws using the Allen key.
-
Remove the silicone plug and open it along the slit.
-
Insert the cable into the plug and reinstall the plug into the junction box.
-
Use the appropriate screws and washers to attach the PTZ camera to the front of the junction box.
-
Weatherproof the Wiring
Connect the necessary cables, pass them and the camera cables through the bottom holes, and secure them with cable glands.
Close the junction box and tighten the screws.
Compatibility
For the product compatibility chart, please visit:
Copyright © 2024 Lorex Technology Inc.
As our products are subject to continuous improvement, Lorex reserves the
right to modify product design, specifications and prices, without notice and
without incurring any obligation. E&OE. All rights reserved.
pro.lorex.com
help.lorex.com/AJLZ-series
References
- Product Compatibility Chart - Expand Your System | Lorex
- Business Security Cameras & Systems | Lorex Pro
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>