DIGITUS DN-49100 10 Inch Wall Mounted Housing Installation Guide
- July 15, 2024
- DIGITUS
Table of Contents
DIGITUS DN-49100 10 Inch Wall Mounted Housing
PRODUCT INFORMATION
Specifications
- Product Name: Wall Housing SOHO PRO Series
- Models Available: DN-49100, DN-49101, DN-49102, DN-49103, DN-49104, DN-49105
- Available Sizes: 6U, 9U, 12U
Product Usage Instructions
Unboxing
- Take the 10” Soho cabinet out of the box.
Assembly
- Slide the top plate onto the body in the direction of the arrows. Ensure the recesses of the top plate fit into the gap of the body.
Attaching Top Panel
- Fix the top panel to the body using the provided screws. Mount the plastic door stopper on the lock side of the glass door.
Bottom Panel Installation
- Slide the bottom panel onto the body in the direction of the arrows. Be careful not to insert the recesses of the bottom panel into the lower holes of the body.
- Insert the bottom hinge pin of the glass door into the hinge hole of the bottom panel. Ensure the recesses of the bottom panel fit into the panel gap of the body.
Final Steps
- Show the QR code to your camera to watch the installation video. Your Soho cabinet is now ready to use.
FAQs
Q: How can I access the installation video?
A: Show the QR code to your camera to watch the installation video.
Q: Can I mount additional accessories on the cabinet?
A: The cabinet is designed to accommodate additional accessories based on your requirements. Ensure compatibility with the existing setup before installation.
WHAT’S IN THE BOX
- Open the box.
- Take the 10” Soho cabinet out of the box.
INSTALLATION INSTRUCTION
- Lay down the rear panel of the body so that the brush will be seen on the front side.
- Open the hinged side panels of the body.
- Slide the top plate onto the body in the direction of the arrows.
- As seen in the details, insert the recesses of a top plate into the gap of the body.
- Fix the top panel to the body with the screws.
- The plastic door stopper then needs to be mounted on the lock side of the glass door.
- Insert the top hinge pin of the glass door from the hinge hole of the top panel.
- Slide the bottom panel onto the body in the direction of the arrows. (Pay attention that recesses of the bottom panel are not to be inserted into the lower holes of the body).
- Insert the bottom hinge pin of the glass door into the hinge hole of the bottom panel. Insert recesses of the bottom panel into the panel gap of the body.
- Assemble the bottom panel to the body with 2 screws.
- Put the cabinet on the floor, the bottom panel touching the ground.
- Bend the recesses of the bottom panel downwards and the recesses of the top panel upwards.
- Show the QR code on your camera to watch the installation video. Your Soho cabinet is ready to use.
- Assmann Electronic GmbH, Auf dem Schüffel 3, 58513 Lüdenscheid, Germany, info@assmann.com, printing errors, falsities, and technical changes remain reserved www.assmann.com
Documents / Resources
|
DIGITUS DN-49100 10 Inch Wall Mounted
Housing
[pdf] Installation Guide
DN-49100, DN-49101, DN-49102, DN-49103, DN-49104, DN-49105, DN-49100 10 Inch
Wall Mounted Housing, DN-49100, 10 Inch Wall Mounted Housing, Wall Mounted
Housing, Mounted Housing, Housing
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>