MACKIE CR StealthBar Desktop PC Soundbar w Bluetooth User Guide

MACKIE CR StealthBar Desktop PC Soundbar w Bluetooth

Important Safety Instructions

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use this apparatus near water.

6.  Clean only with a dry cloth.

7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.  Minimum distance (5 cm) around the apparatus for sufficient ventilation.

9.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

10. No naked flame sources, such as lighted candles, should be placed on the apparatus.

11. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

12. particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

13. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket, PORTABLE CART or table specified by the manufacturer,

14. WARNING or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

15. Unplug this apparatus during lightning storms or when unused for long periods of time.

16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

17. This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases or beer glasses, shall be placed on the apparatus.

18. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

19.  Explanation of symbol, marking, signal lamp or similar means indicates that the apparatus is completely disconnected from the mains.

20. WARNING : Please refer to the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

21.   NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

22. Reorient or relocate the receiving antenna.

23. Increase the separation between the equipment and the receiver.

24. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

25. Consult the dealer or an experienced radio/TV technician for help.
    CAUTION : Changes or modifications to this device not expressly approved by LOUD Audio, LLC. could void the user’s authority to operate the equipment under FCC rules.

26. This apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.
    Canada ICES-003(B)/NMB-003(B)

27. 23. This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s)]. Operation is subject to the following two conditions:

28.  this device may not cause harmful interference, and

29.  this device must accept any interference received, including interference that may cause undesired operation.

30. RF Power: <10dB

31.  Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart. According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent permanent hearing loss if exposure is in excess of the limits set forth here:

WARNING  To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION  These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

DISPOSAL

Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

Hookup Diagrams

Front, Side & Rear Panel Descriptions 

1.  Power Connector Connect the supplied power adapter to this jack.
2.  USB I/O An interface allowing you to stream audio to and from the CR StealthBar via computer. Connect the USB-C side of a USB cable to the CR StealthBar and the USB-A side to the computer’s USB port.
3.  Line Input Connect a line-level signal using an 1/8″ connector.
4.  Output Connect to a subwoofer using an 1/8″ connector.
5.  Bluetooth Button and LED Press and hold to pair with a Bluetooth device, press quickly to connect to last connected Bluetooth device, or press quickly while connected to Bluetooth device to pause/play audio. The Bluetooth may disconnect when affected by Electrostatic Discharge [ESD]. Manually reconnect the Bluetooth connection.
6.  Phones Output Connect stereo headphones here.
7.  Volume Knob Adjusts the overall output level and also turns the monitor on and off. Push knob to mute.
8.  EQ Press repeatedly to cycle between EQ presets. Release to select.
9.  Input Selector Selects which input – USB, 1/8″ or Bluetooth – is active.

Getting Started

1.  Read and understand the Important Safety Instructions on page 2.
2.  Make all initial connections with the power switches OFF on all equipment. Make sure the volume control is all the way down.
3.  Push the included line cord securely into the CR StealthBar’s power connector and plug the other end into an AC outlet.
4. Plug signal sources into the CR StealthBar, such as:
5.  Line-level source plugged into the line-level input.
6.  Computer plugged into the USB-C jack.
7.  Smartphone paired and connected via Bluetooth.
8. Turn the CR StealthBar on. [Volume knob].
9.  Confirm that the input selector switch has the correct input selected.
10.  Slowly raise the input and output volume knobs to a comfortable listening level.

Technical Specifications

Frequency Range • Rango de frecuencias Plage de fréquence • Frequenzbereich (–10 dB)| ****

67 Hz – 20 kHz

Maximum SPL Peak • SPL máximo en picos Niveau de pression sonore max (peak) Maximaler Schalldruck| ****

100 dB

Total System Power Potencia total del sistema Puissance totale du système Gesamtleistung des Systems| 50 watts peak Class D power amplifier Etapa de potencia clase D y 50 watios en picos Ampli de puissance Classe D 50 watts crête

50 Watt Spitze Class D Endstufe

Coverage Pattern • Patrón de cobertura Couverture sonore • Abstrahlverhalten| 45˚ horizontal x 90˚ vertical (vertikal)
Dynamic Range • Rango dinámico Plage Dynamique • Dynamikbereich| >105 dB
Signal-to-Noise Ratio Relación señal-ruido Rapport signal-bruit Geräuschspannungsabstand| ****

<-85 dB

Input Type Tipo de entrada Type d’entrée Eingangstyp| Female 1/8″ / USB-C / Bluetooth 3,5 mm hembra / USB-C / Bluetooth 3,5 mm femelle / USB-C / Bluetooth 3,5 mm-Buchse / USB-C / Bluetooth

Bluetooth

| 5.0

Audio streaming Streaming audio flux audio

Audio-Streaming

Bit Depth / Sample Rate Frecuencia de muestreo Fréquence d’échantillonnage Samplerate| ****

16 / 24-bit

44.1 / 48 / 88.2 / 96 kHz

Power Requirements • Alimentación Alimentation • Spannungsbedarf| 100 – 240V @ 0.8A 50 / 60Hz

12V @ 3.0A

Size (H × W × D) • Tamaño (A × L × P) Dimensions (H × L × P) • Abmessungen (H × B × T)| 4.0 x 18.7 x 3.0 in

102 x 475 x 76 mm

Weight • Peso • Poids • Gewicht| 4.3 lb

2.0 kg

WARRANTY AND SUPPORT

Visit WWW.MACKIE.COM to:

• Identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place.
• Retrieve a full-version, printable OWNER’S MANUAL for your product.
• DOWNLOAD software, firmware and drivers for your product (if applicable).
• REGISTER your product.
• CONTACT Technical Support.

19820 NORTH CREEK PARKWAY #201

• BOTHELL, WA 98011
• USA Phone: 425.487.4333
• Toll-free: 800.898.3211
• Fax: 425.487.4337

References

• MACKIE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>