anko LD24173M Multi Function Warm White Berry Lights Instructions

anko LD24173M Multi Function Warm White Berry Lights

Product Specifications

• Model: LD24173M K: 43446902 / T: 70027006
• Length: 5m
• Total LED Count: 150 LEDs
• Color: Warm White
• Usage: Suitable for Indoor and Outdoor use (not for permanent or long-term use)
• LED Driver Installation: Indoor only, away from weather
• Adaptor Model: JT-EL/FC24V 3.6W-H9
• Input Voltage: 220-240VAC, Frequency: 50-60Hz, Current: 0.12A Max
• Output Voltage: 24VAC, Power: 3.6W
• Class: Class II product, for indoor use only

Product Usage Instructions

Warnings:

• Keep out of reach of children.
• Avoid exposure to extreme wet weather or water submersion.
• Always switch off or unplug when unattended.
• Avoid overloading power sockets or extension leads.
• Avoid damaging bulbs or wiring by not bending, standing on, or piercing the cable.

Adaptor Manual Instructions:

1. Use equipment according to rated voltage and current.
2. Do not open the cover of the equipment.
3. Designed for use with LED lighting equipment.
4. Check input and output voltage before use.
5. Keep away from children and ensure proper clearance from flammable materials.

Installation Guidelines:

Follow the below steps for safe installation:

1. Ensure proper clearance from flammable materials – minimum 75mm from top and sides.
2. Avoid covering the LED driver with any material.
3. Avoid abutting against any material during installation.

150LED MULTI FUNCTION WARM WHITE BERRY LIGHTS
(Model No.: LD24173M K: 43446902 / T: 70027006)

DIMENSION

Warnings:

• The light chain is suitable for INDOOR AND OUTDOOR USE.
• This product is NOT designed for permanent or long-term use.
• The LED driver MUST be installed INDOOR away from weather.
• The LED driver is suitable for operation of LED Modules only.

Only operate this light chain with the LED driver, Model No. JT-EL/FC24V 3.6W-H9

• Do not connect this light chain electrically to another light chain.

• Do not operate the product while it is in the packaging.

• DO NOT attempt to replace the non-replaceable bulbs in this light chain.

• Never allow any part of the set to come into contact with a source of heat or flame.

• Care must be taken to avoid damage the cable or fittings.

• If any part of light set or cable is damaged, the light set MUST be discarded.

• This product is for use as a decoration only. Not to be used by children as a toy.
  Keep out of reach of children.

• Do not position this light chain where it will be exposed to extreme wet weather or submerged in water.

• Always switch off this light set or unplug an adaptor if unattended.

• DO NOT overload power sockets or extension leads.

• DO NOT pierce the cable when securing in place, bend or stand on the light chain, as this will damage the bulbs or wiring.

• Please refer to the packing or product rating label for product class, specifications and rating.

Adaptor Manual

1. Please use the equipment according to the rated voltage and current.

   ---

Model No.

| Input Rated| Output Rated
---|---|---
Voltage| Frequency| Current| Voltage| Power

JT-EL/FC24V 3.6W-H9

| ****

220-240VAC

| ****

50-60Hz

| ****

0.12A Max

| ****

24VAC

| ****

3.6W

2. Do not open the cover of the equipment.
3. For use with LED lighting equipment.
4. The input and output voltage should be checked before use to ensure correct use.
5. This is the Class II product, only for indoor use.
6. The product is not a toy, keep it where children cannot reach.
7. The lamp controlgear does not rely upon the luminaire enclosure for protection against accidental contact with live parts.
8. If applicable: an indication that the controlgear is suitable for operation with LED modules.
9. Do-not-cover classification

The LED driver that can be used where normally flammable materials.
including building insulation are or may be present, but cannot be abutted against any material and cannot be covered in normal.
Minimum clearance distance from the top and sides of the control gear to normally flammable building element is 75mm; as shown in below picture, A=B=C=Min.75mm.

Frequently Asked Questions (FAQ):

Q: Can the light chain be used outdoors?
A: Yes, the light chain is suitable for both indoor and outdoor use, but not for permanent or long term use. Ensure the LED driver is installed indoors away from weather.

Q: How many LEDs are there in the light chain?
A: The light chain contains a total of 150 LEDs.

Q: What is the recommended voltage for the adaptor?
A: The adaptor should be used with an input voltage of 220-240VAC and an output voltage of 24VAC.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>