anko BY-736 Hair Curler Instruction Manual

: September 8, 2024
: Anko

Table of Contents

Hair Curler
- INSTRUCTION MANUAL
- Model No.: BY-736
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hair Curler

INSTRUCTION MANUAL

anko BY-736 Hair Curler 0

Model No.: BY-736

Please read this instruction manual before using your hair curler and keep it in a safe place for future reference. If you pass the appliance on to anyone else, please include this manual.

INTRODUCTION

Use this appliance to curl human hair only. Do not use this appliance on artificial hair or animals.
IMPORTANT! The appliance may have different results depending on the hair type. Therefore, we recommend to do a trial at a hidden spot before first use. The hair curler is not recommended for damaged or bleached hair.

SAFETY PRECAUTIONS

Carefully read all instructions before operation and retain for future reference.
Do not place near the edge of a bench or table during operation.
Ensure the surface is dry, level, clean and free of liquid and other substances.
Do not leave the Hair curler unattended when in use. Always ensure the appliance is turned OFF by switching off and unplugging the appliance when not in use, if left unattended and before cleaning and storing.
Always keep the appliance clean.
Fully unwind the cord before use.
To protect against electric shock, do not immerse the power cord, plug or appliance in water or any other liquid.
Do not allow the cord to hang over the edge of the table or bench, touch hot surfaces or become knotted.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with this appliance.
If the supply cord shows any signs of damage, DO NOT use. For electrical safety, any repairs to the product must be carried out by qualified electrical person only or the product must be disposed to avoid a hazard.
This product is intended for household use only, not designed for commercial industrial purposes. Do not use it outdoors.
NEVER grasp the appliance, power cable or power plug with wet hands.
Always remove the power cable from the socket by pulling on the plug; do not pull on the cable itself. Do not hold or carry the appliance with the power cord.
Do not fold or crush the power cable. Ensure that the power cable does not run over sharp edges.
Please do not attempt to dismantle the appliance. This appliance has no user serviceable parts inside.
When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
For additional protection, the installation of a residual current device (RCD/ Safety switch) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the power outlet socket in the bathroom. If unsure, check with your electrician.
DANGER OF ELECTRIC SHOCK! Do not insert any foreign objects into the appliance.
Do not use any accessories not supplied with this product.
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
When the appliance is connected to the power supply, never leave it unattended.
Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface.
For user maintenance, please refer to “Cleaning and Maintenance” section.

RISK OF FIRE

Do not leave the appliance unattended when in use.
To avoid a build-up of heat, NEVER cover the appliance. Do not use the appliance under a blanket or at other poorly ventilated locations
Avoid the addition of heat from other sources, e.g., from direct sunlight, heating appliances, other devices, etc.
Do not use an extension cable. In the event of danger, the plug must be quickly and easily accessible.

ELECTRICAL REQUIREMENT

Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply, 220-240V AC 50Hz.

IMPORTANT!

The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live power outlet socket.
If the supply cord is damaged, DO NOT USE. Any repairs to the product must be carried out by qualified electrical person only or the product must be disposed.

Danger of suffocation! Keep all packaging material away from children. Dispose of the packaging materials in an appropriate way. Contact your local authorities about collection points or waste separation.

Burn hazard! Keep appliance out of reach from young children, particularly during use and cool down.
Take care to avoid contact between the hot surfaces of the unit and skin, paying particular attention to the face, neck, chest and hands.

WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

Class II Appliance

PARTS

anko BY-736 Hair Curler 1

(1) 19mm single barrel attachment
(2) 22mm triple barrel attachment
(3) Stand
(4) Barrel clamp lever
(5) Attachment release button
(6) LED display
(7) On/Off; Temp. adjustment button
(8) Swivel connection

BEFORE FIRST USE

After unpacking the appliance, check for transport damage and that all the parts mentioned in this manual are present. In the event of damaged or missing parts, return the product back to Kmart.
Do not discard the original box. It can be used for storage and dispatch to avoid transport damage.
Clean the appliance as described in Cleaning and Maintenance. For your safety, make particular attention to the safety instructions supplied in the instructions manual when using this product.

Changing attachment

To attachment the barrel, make sure barrel and handle had faced upward, then push the barrel to handle until click sound was heard.
To detach the barrel, press the Attachment release button then pull to detach the barrel.

OPERATION

WARNING! Never touch the hot curling barrels.
WARNING! Always use the handle to hold the curler.
ATTENTION! The curling barrels cool down slower than it heats up.

Fully unwind the supply cord before turned on the product.
Select the desired attachment head.
When using the 3-barrel attachment, unfold the wire stand before resting the unit on table or work bench.
Always place the appliance with stand, if any, on a heat resistant, stable flat surface.
Connect the power plug to a mains power outlet socket. Display show “OFF”.
Press and hold the ON/OFF switch to turn on the unit, and the LED display will light up.
Press again the ON/Off button to adjust barrel temperature.
Default setting is 200°C, you may select temperature range between 100°C and 200°C.
The set temperature will keep flashing while heating up. A steady display will be shown when the curler had reached the temperature you have set.
When the appliance is ready, you may start hair styling.
After using, press and hold the ON/OFF button to turn OFF the unit. Make sure the display shows OFF.

ATTENTION! The barrel heats up very fast. It takes approx. 3 minutes to reach max. temperature.

Using Single barrel attachment

Press the clamp lever (3) to open the clamp. Take a section no more than 3cm wide. Place the hair strand between the barrel and clamp, then release the clamp lever, so that hair strand is fixed.
Rotate the handle so that the strand of hair is rolled up to the roots. Maintain sufficient distance between the scalp and curling barrel.
Hold the curling iron in position for 10-15 seconds to create gentle hair waves.
Carefully unwind the strand halfway, open the clamp by pressing the clamp lever and free the curled hair gently.
Continue styling the remaining sections of hair. For better results, wash, comb and blow your hair until 80% dry.

Using Triple barrel attachment

Take a section no more than 3cm wide.
Position the hot barrels at least 10cm from the roots without touching the scalp.
Place the hair strands between the top and bottom barrels, then release the barrel clamp lever.
Hold the hair styler in place for 8-10 seconds to create gentle waves.
Press the barrel clamp lever to open and separate the top and bottom barrels and slide the hair strands out.
Repeat this process until you have curled all the hair you desired.
For better results, wash, comb and blow your hair until 80% dry.

IMPORTANT! Do not leave the Hair Curler unattended when in use.

Unplug the appliance, then put it on the table to allow for cooling.
CAUTION! Allow to cool before putting it down or storing away.
CAUTION! Always unplug the appliance immediately after use in case of malfunction or before cleaning.
IMPORTANT! The appliance may provide different results depending on the hair type. Therefore, we recommend doing a trial on a hidden area of your hair before first use.
This Hair Curler is not recommended for use on damaged or bleached hair.

CLEANING AND MAINTENANCE

ATTENTION! Turn off the appliance before cleaning and disconnect the plug from the power outlet.
ATTENTION! Do not use any alcohol, acetone, gasoline, abrasive cleaning agents, etc. to clean the plastic components. Do not use hard brushes or metal objects for cleaning.
Risk of burning! Do not attempt to clean the appliance while it is still hot.
Wipe the appliance with a dry cloth.
Never submerge the appliance in water or let water run over the heating plates or the appliance.
The heating barrels can be cleaned with a slightly damp cloth and a little detergent if necessary. Dry thoroughly after cleaning.

STORAGE

Store the appliance in a cool, dry location, away from children and pets.
If the appliance is not used for an extended period, store it preferably in its original packaging.
After use, do not wrap the cord around the appliance as in time this may cause the cord to fracture. Coil cord loosely by the side of the appliance in storage.

DISPOSAL

Do not dispose this product with normal household waste collection. If unsure, contact the local council waste management service for proper disposal facilities available for your area.