noise OL_V3_UM Color Fit Vision 3 Smartwatch Elite Edition Instruction Manual

noise OL_V3_UM Color Fit Vision 3 Smartwatch Elite Edition

PACKAGE CONTAINS

• ColorFit Vision 3 Smartwatch x 1
• Charging Cable x 1
• User Manual x 1
• Warranty Card × 1

WATCH OVERVIEW

• Noise Health
• Noise Buzz
• Clock
• Workouts
• Sports record
• Reminders
• Music
• Weather
• Watch faces
• Stocks
• Flashlight
• Calculator
• Settings

CHARGING COLOR FIT VISION 3 SMARTWATCH

Before using your ColorFit Vision 3 for the first time, charge the battery to its full capacity. Use the charging cable provided with the watch to charge. On a single charge, ColorFit Vision 3 can last up to 7 days of use, 2 days with calling.

Note : The battery life and time to fully charge your device may vary as per usage and other factors

CHARGE COLORFIT VISION 3

• Plug the USB cable into a power adaptor and the adaptor into an electrical socket. (Power adaptor not included).
• Place the magnetic charger on the magnetic charging points of the watch.
• While your watch is charging, the screen will show its progress.
• Once the battery is fully charged, remove the charger.

POWER ON
Press and hold the upper side button for a few seconds to turn on the watch.

POWER OFF

• Press and hold the side button for a few seconds.
• Select ‘Power off’ and confirm to power off.

WAKING UP THE WATCH

• To preserve the battery, the watch screen turns off when not in use.
• To turn the screen back on, you can wake up the watch by:
• Pressing the upper side button
• Turning on the wrist sense

WATCH NAVIGATION

The ColorFit Vision 3 smartwatch has an AMOLED touchscreen. Navigate the watch by tapping on the screen, swiping side to side, up and down, and pressing and rotating the crown.

CROWN NAVIGATION

• Press the crown to turn on the watch display
• Press the crown to exit a feature.
• Rotate the crown to navigate through the various watch features.

HOME SCREEN NAVIGATION
The home screen is the watch face.

From the home screen:

• Swipe right to check your Activity data.
• Swipe left to check your heart rate.
• Swipe up to go to quick settings.
• Swipe down to check message notifications.
• Press the side lower button to go to sports mode directly from the home screen.

SETUP

Before pairing, make sure that your smartphone and smartwatch are next to each other.

• Turn on BT and the location on your mobile device.
• On your smartphone, download the NoiseFit app from the Play Store or the App Store and install it.
• The app will ask for personal information such as gender, birthday, height, weight, and step length to calculate your stride length, distance covered, and calorie burn rate

Note: Ensure that your smartphone is running on Android 9 + or iOS 11 + and is connected to mobile data or a Wi-Fi network.

PAIR THE WATCH

• Open the NoiseFit app and allow the BT and GPS positioning to be turned on.
• Feed your personal information and health goals in the app.
• Go to the ‘Device’ page and select ‘add device’ in the app, the watch name and MAC address and link the watch. You can also scan the QR code on the ColorFit Vision 3 from the NoiseFit app.

BT CALL CONNECTIVITY
To establish Bluetooth calling connectivity, follow these steps.

For automatic connection
After pairing the watch with the NoiseFit app, the watch’s calling Bluetooth would be activated. Now connect it with your phone’s Bluetooth to use the calling feature conveniently.

MANUAL CONNECTION

In case the Bluetooth calling connectivity has not been established earlier, you’ll have to do the steps manually.

• Go to Settings.
• Search for a device and pair your smartphone to attend your calls from the watch.

BT CALL CONNECTIVITY REMOVAL
In Android devices, to remove the BT connection, you can unpair from the app and the phone’s BT settings. Go to the phone’s BT settings and forget ColorFit Vision 3. In iOS devices, to remove the BT connection, you can unpair from the app and the phone’s BT settings. Go to the phone’s BT settings and forget ColorFit Vision 3 and ColorFit Vision 3 Calling.

• NOISE HEALTH
  Noise health comes with a collection of wellness features so that you can take better care of yourself. You can check your activity, heart rate, blood oxygen, sleep, breathing, stress levels, and cycle tracker by tapping on Noise Health.

• ACTIVITY
  Tap on activity to get a detailed daily activity report on calories burned, steps taken, standing minutes, distance covered, and active time. You can set or edit your daily activity goals on the NoiseFit app while setting up the watch.

• HEART RATE
  Select the heart rate feature to start measuring. Ensure that there is no gap between the back panel of the watch and the wrist. Hold still while it measures your heart rate.

• BLOOD OXYGEN
  The smartwatch supports viewing the highest and lowest values of blood oxygen levels of the day. Ensure that there is no gap between the back panel of the watch and the wrist. Hold still while it measures your blood oxygen level.

• SLEEP
  Tap sleep to view your previous sleep duration. You can view your most recent sleep records and sleep quality in various sleep stages on the NoiseFit app.

• BREATHE
  The Breathe feature lets you adjust your breathing rhythm at your convenience. Choose from 3 speeds – fast, moderate & slow. Choose the duration and start.

• STRESS
  Select stress to start the measurement. Ensure that there is no gap between the back panel of the watch and the wrist. Hold still while it measures your stress levels.

• CYCLE TRACKER
  You can use this feature to keep track of your menstrual cycles and plan better. Feed in the information to start tracking.

• NOISE BUZZ
  Tap on Noise Buzz to access the dial pad, view your contacts,s and check your call history.

• CLOCK
  Tap on the clock to access your alarms, timer, stopwatch, and world clock.

• WORKOUTS
  Tap on workouts and select your preferred form of exercise.

• SPORTS RECORD
  Tap on sports records to check on your recent performance.

• REMINDERS
  Select reminders to set your preferred reminder. You can add or edit reminders on the NoiseFit app.

• MUSIC
  You can control your favorite songs and podcasts that play from your phone, right on your wrist as long as the watch is connected to the NoiseFit app on your phone. You can play/pause music, go to the next/previous track, and increase/decrease the volume.

• WEATHER
  ColorFit Vision 3 supports 7-day weather viewing in a location of your choice as long it is synced with the NoiseFit app. You can view today’s current weather and for the next 4 days as well. Go to the NoiseFit app, select ‘Devices’ and click on ‘Weather settings’ to enable the feature.

• WATCH FACES
  Long press the home screen to access your saved watch faces. Swipe left/right to navigate. You can customize your watch face on the NoiseFit app.

• STOCKS
  Tap on Stocks to access your saved stocks. Add or change stocks at your convenience.

• FlasHLIgHT
  You can use this feature to turn on the screen brightness and see your surroundings better. Go to the Flashlight. Tap to turn on.

• CALCULATOR
  You can use this feature to do basic calculations.

SETTINGS

• WRIST AWAKE
  Tap on Wrist Awake. Activate the wrist awake feature for a set amount of time or leave it on all day.

• TAP TO WAKE UP
  Tap on wake up. Activate the wake-up feature for a set amount of time or leave it on all day.

• BRIGHTNESS
  You can set the brightness as per your preference.

• SCREEN TIMEOUT
  Tap on screen timeout and select the amount of time before your screen times out.

• ALWAYS ON DISPLAY
  Tap on Always on Display and choose the time you want the screen to remain on. Leaving this feature on all the time can impact battery consumption.

• DO NOT DISTURB
  Tap on Do not Disturb and select the amount of time you want notifications to be turned off.

• RINGTONE VIBRATION
  You can set the ring and vibration as per your preference.

• MENU VIEW
  Tap on the menu view and make your selection from a grid or list view.

• AUTO SPORTS DETECTION
  Tap on Auto Sports Detection to turn it on or off.

• WIDGET SORTING
  You can use this feature to personalize the widgets’ display as per your preference.

• ABOUT CALLS
  To use this feature connect your phone’s Bluetooth with your watch’s Bluetooth.

  • DEVICE INFO
    Tap on Device Info to view the device information.

• QR CODE
  Tap on the QR code to scan your device.

• REBOOT
  You can also choose this option to reboot the watch.

• POWER OFF
  You can select this option to power off the watch.

• RESET
  You can choose to reset. Do note if you choose to reset, all your data and settings will be erased.

QUICK SETTINGS

You can swipe up from the watch’s home screen to gain quick settings access.

• SILENT MODE
• FIND PHONE
• BRIGHTNESS
• DND
• POWER SAVING MODE
• SETTINGS

DEVICE INFORMATION AND TIPS

DEVICE INFORMATION
The ColorFit Vision 3 smartwatch contains the following

• 1.96″ AMOLED screen display (410*502 px)
• BT calling (built-in microphone & speakers, recent calls, dial pad, contacts)
• 150 cloud-based & customizable watch faces
• Health tracking with NoiseFit app (Activity tracking, blood oxygen monitor, sleep tracker, 24*7 heart rate monitor, breathing, stress tracker, female cycle tracker)
• 7 days of use, 2 days with calling & 30 days on standby)
• Utility/productivity features (Stopwatch, alarm, timer, reminder, DND, weather, camera/music controls)
• IP68 waterproof

TIPS
How do I update my ColorFit Vision 3?
You can update your ColorFit Vision 3 via the NoiseFit app. Go to My Device and select Che for updates.

How do I find my watch’s current firmware version?
You can find the watch’s current firmware on the watch. Go to “My Device” on the NoiseFit app. Select “Upgrade”, choose Check for updates, and update if any update is available.

How do I save battery?
Follow these simple steps to save the ColorFit Vision 3 battery.

• Minimize the screen brightness
• Limit the notifications you receive from the NoiseFit app.

How does the watch estimate how many calories have been burned?
ColorFit Vision 3 estimates how many calories you’ve burned based on the physical data you entered when you set up your account.

How do I change my activity goals?
You can do it through the NoiseFit app. Go to “My Profile” and select “Goal”. Change your goals and confirm.

How do I log my weight?
You can log your weight the first time you set up your NoiseFit app. However, you can update the weight later via the NoiseFit app. Go to My Profile, select Personal Information, and change or update your weight. You can update your birthday, height, country, and e-mail ID as well.

DISPOSAL AND RECYCLING INFORMATION
Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return the electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details of this are defined by the national law of the respective country. By recycling, reusing materials, or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

REGULATORY INFORMATION

USA : Federal Communications

Commission (FCC) Statement
This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:
This device may cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  If this 76 equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, Max is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The ColorFit Vision 3 watch is not a toy. The watch contains small components that could be a choking hazard and are not intended for use by small children or pets. Unless otherwise specified, devices and services are not medical devices and are not intended to diagnose, treat, cure, or prevent any disease. We develop products and services to track daily activity and wellness information as accurately as possible. The accuracy of devices is not intended to be equivalent to medical devices or scientific measurement devices. in some cases, prolonged use of products may cause skin irritation. Prolonged contact may contribute to skin irritation or allergies. To reduce the possibility of irritation, keep the watch and watch band clean and dry. Don’t wear it too tight and give your wrist a rest by removing the watch after an extended period of wear. If you feel soreness, tingling, numbness, burning, or stiffness in your hands or wrists while or after wearing the watch, please immediately discontinue use.

MAINTENANCE INSTRUCTIONS

• Keep the device dry and clean regularly especially after prolonged use as moisture and dirt can build up underneath the band and can cause skin irritation.
• Do not wear the device too tight but make sure that the bottom sensor is lightly in contact with your skin and there is a gap of about one finger’s width between the wrist strap and your wrist.
• Do not use household cleaners to clean the device. Use soap-free cleaners instead.
• For stains that are difficult to remove, it is recommended to scrub with alcohol.
• The device is not suitable for diving, swimming in the sea, or sauna; it is suitable for swimming pools, showers (cold water), and swimming in shallows.
• Keep it away from direct sunlight high-temperatur   ,or humid conditions as it may damage the band over time.

CUSTOMER SUPPORT
If you experience any problem with the watch, it may be fixed by restarting your watch. For any assistance, please reach out to us at link: https://support.gonoise.com/support/home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>