noise ColorFit Mighty Smartwatch User Manual

ColorFit Mighty
Please refer to this manual before using the product

WATCH OVERVIEW

• Workout
•  Workout Record
• Activity
• Heart Rate
• 5p02
• Sleep
• Breathe
• call
• Favorite Contacts
• Alarm
• Weather
• Stopwatch
• Timer
• Music Control
• Gamera Remote
• Find My Phone
• Flashlight
• Settings

PACKAGE CONTAINS

GHARGING COLORFIT MIGHTY SMARTWATCH

Before using your Colorfit Mighty for the first time, charge the battery to its full capacity, Use the charging cable provided with the watch to charge. On a full charge, ColorFit Mighty can last up to 7 days.
Note: The battery lfe and time to fully charge your device may vary as per usage and other factors.

GHARGE COLORFIT MIGHTY

• Plug the USB cable into a power adaptor.
• Plug the power adaptor into an electrical socket. (Power adaptor not included)
• Place the magnetic charger on the magnetic charging points of the watch.
• While your watch s charging, the screen will show the time, battery percentage and charging progress.
• Once the battery i fully charged, remove the charger.

POWER ON

• Press and hold the rotating crown for a few seconds to turn on the watch.

POWER OFF

• Press and hold the rotating crown for a few seconds.
• Select ‘Power Off and confirm to power off.

WAKING UP THE WATCH
To preserve battery, the watch screen turns off when not in use.
Turn the screen back on by:

• Pressing the rotating crown

WATCH NAVIGATION
The Colorfit Mighty smartwatch has a TFT touchscreen. Navigate the watch by tapping on the screen, swiping side to side, up and down and pressing and rotating the crown.
CROWN NAVIGATION
Press the crown to turn on the watch display.

• Press the crown 1o exit a feature.
• Rotate the crown to navigate through the various watch features.

HOME SCREEN NAVIGATION

The home screen is the watch face.
From the home screen:

• Swipe right to check your Daily Brief.
• Swipe left to check your Activity data.
• Swipe up to go to quick settings.
• Swipe down to check message notifications.

Set up
Before pairing, make sure that your smartphone and smartwatch are next to each other.

• Turn on Bluetooth and the location on your mobille device.
• On your smartphone, download the NoiseFit app from the Play Store or the App Store and install it
• The app will ask for personal information such as gender, birthday, height, weight and step length to calculate your stride length, distance covered and calorie burn rate.

Note: Ensure that your smartphone is running on Android 9 + or i0S 11+ and s connected to mobile data or a WI-Fi network,

PAIR THE WATCH

• Open the NoiseFit app and allow the Bluetooth and GPS positioning to be turned on.
• Feed in your personal information and health goals in the app.
• Go to‘Add Device’ page in the app, select the device type and link the watch.

Or you can follow the steps below:

• Turn on the watch
• Scan the QR code from the NoiseFit app on your phore.
• Select ‘Pair with device’ and wait for it to pair
• Select ‘Add Device’. Choose your device from the range of devices.

On i0S: Chooss Bluetooth pairing when you receive a pairing prompt. On Android: Connect

BLUETOOTH CALL CONNECTIVITY
To establish Bluetooth calling connectivity, follow these steps.
FOR AUTOMATIC CONNECTION

• After pairing the watch with the NoiseFit app, the watch’s calling Bluetooth would be activated.
• Now connect it to your phone’s Bluetooth t0 use the calling feature conveniently.

MANUAL CONNECTION

In case the Bluetooth calling connectivity has not been established earlier, you will have to do the steps manually.

• Go’to Settings.
• Search for the device and pair your smartphone to attend calls from the watch.

BLUETOOTH CALL CONNECTIVITY REMOVAL

• In Android devices, to remove the Bluetooth connection, you can unpair from the app and the phone’s Blustooth settings. Go to the phane’s Bluetooth settings and forget ‘ColorFit Mighty .
• Ini0S devices, to remove the Bluetooth connection, you can unpair from the app and the phone’s Blustooth settings. Go to the phone’s Bluetooth settings and forget ColorFit Mighty” and ‘ColorFit Mighty Calling.

WORKOUTS
Tap on ‘workouts’ and select your preferred form of exercise.
WORKOUT RECORD
The Workout record feature allows you to keep a track of all your workouts done in the past.
ACTIVITY
Tap on ‘Activity’to get a detailed daly activiy report on calories burned, steps taken and distance covered. You can set or edit your daily activity goals on the NoiseFit app while setting up the watch.
HEART RATE
Select the Heart rate feature to start measuring. Ensure that there is o gap between the back panel of the watch and the wrist . Hold still while it measures your heart rate. SPO2
The smartwatch supports viewing the highest and lowest values of SpO2 levels of the day. Ensure that there is no gap between the back panel of the watch and the wrist Hold still while it measures your blood oxygen level.
STEEP
Tap ‘Sleep’to view your previous sleep duration. You can view your most recent sleep records and sleep quality in various sleep stages on the NoiseFit app.
BREATHE
The Breathe feature lets you adjust your breathing rhythm at your convenience.
CALL
Tap on Callto access the dial pad and view your contacts.
FAVORITE CONTACTS
Store up to 10 contacts via the NoiseFit app and view them by tapping on Favorite contacts. ALARM
Set and remove alarms by tapping on Alarm.
WEATHER
Colorfit Mighty supports weather viewing in your current location as long itis synced with the Noisefit app. You can View todays current weather and for the next 4 days as well.
STOPWATCH
A stopwatch can be set on the watch. You can also set lap times in the stopwatch.
TIMER
You can set a countdown with a pre-set duration on the watch or set your own time and it will remind you when the time is up.
MUSIC CONTROL
You can control your favourite songs and podcasts that play from your phone, right on your wrist as long as the watch is ‘connected with the NoiseFit app on your phone. CAMERA REMOTE
You can use this feature to use the camera remotely from the watch.
FIND MY PHONE
This feature helps you find your mobile device by making it ring. Just tap on Find my phone’, click on the start button on the bottom and your phone will start to ring, even If it s on Silent mode.
FLASHLIGHT
You can use this feature to turn on the screen brightness and see your surroundings better. Go o the Flashiight. Tap to tur it on.

SETTINGS

WATCH FACES
Click on Watch Face to access your saved watch faces. Swipe left/ight to navigate. You can customise your watch face on the NoiseFit app.
DISPLAY
Tap on Display to adjust your watchs brightness, and timeout duration and turn the Raise to Wake feature on and off.
REMINDERS.
Select ‘Reminders’to set your preferred reminder. You can add or edit reminders on the NoiseFit app.
DO NOT DISTURE
Tap on ‘Do not Distury to turn off notifications and even schedule when you want your watch to be on do not disturb mode. You also have the option to turn on Smart Mode where, if the watch detects that you are asleep, it will no longer notify or vibrate except
for alarms and timers.
BATTERY
Check your watchis battery levels and turn on Power Saving Mode to conserve battery.
GENERAL
Tap on General to change the app view, increase or decrease vibration intensity and power of, reboot and reset your watch.
ABOUT
Tap on About to view the devics information.
QUICKK SETTINGS
You can swipe up from the watchs home screen to gain quick settings access.
DND MODE
POWER SAVING MODE
BLUETOOTH CALLING
BRIGHTNESS
RAISE TO WAKE
SETTINGS

DEVICE INFORMATION AND TIPS

DEVICE INFORMATION
The Colorfit Mighty smartwatch contains the following:

• 196″ TFT screen display (240°286 px)
• Bluetooth caling (buitin microphone & speakers, recent calls,dial pad, contacts)
• 150 cloud-based & customisable watch faces
•  Health tracking with NoiseFit app (Activity tracking, SpO2 monitor, sleep tracker, 247 heart rate monitor, breathe)
• (7 days of use, 2 days with calling & 30 days on standby)
• Utility/productivity features (Stopwatch, alarm, timer, reminder, DND, weather, camera/music controls)
• P67 waterproof

The ColorFit Mighty smartwatch stores
Your activity data for up to 4 days in between the time you sync your watch to the NoiseFit app. Activity data includes your steps, distance, calories, active minutes, heart rate, sleep duration and workout data. We recommend syncing the watch to the app daily.
How do I find my watch’s current firmware version?
You can find the watch’ current firmware on the watch. Go to Sattings on the Noisefit app. Select Device information, choose Check for updates and update if any update s avalable.
How does the watch estimate how many calories have been burned?
ColorFit Pulse estimates how many alories you’ve burned based on the physical activity data and your heart rate.
How do change my activity goals?
You can doit through the NoiseFit app.
Go to My Profile: Goto Setup and select My Objectives: Change your goals and confim.
TIPS,
How do update my ColorFit Mighty?
You can update your ColorFit Mighty via the NoiseFit app. Go to ‘My Profile’ and select ‘Check for updates.

How do llog my weight?
You can log in your weight the first time you set up your NoiseFit app.
However, you can update the weight later via the NoiseFit app. Go to My Profile, select Personal Information and change or update your weight. You can update your birthday, height, country and e-mail ID as well

DISPOSAL AND RECYCLING INFORMATION

Electrical and electronic devices may ot be disposed of with domestic waste.
Consumers are obliged by law to return the electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Detalls of this are defined by the national law of the respective country. By recycling, reusing materials o other forms of utilising old devices, you are making an important contribution to protecting our environment.

REGULATORY INFORMATION

USA: Federal Communications

Commission (FCC) Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
This device may cause harmful interference, and this device must accept any Interference received, including interference that may cause undesired operation Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the authorty to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant t0 part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation.
If this 76 equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the Max is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The Colorfit Mighty watch is not a toy. The watch contains small components that could be a choking hazard and are not intended for use by small children or pets. Unless otherwise. specified, devices and services are not a medical device and are not intended to diagnose, treat, cure or prevent any disease. We develop products and services to track daily activity and wellness information as acauratelyas possible. The accuracy of devicels is not intended to be equivalent to medical devices or scientific measurement devices.
In some cases, prolonged use of products may cause skin iitation.
Prolonged contact may contribute to skin iritation or allergies. To reduce the possibilty of ritation, keep the watch and watch band clean and dry. Don’t wear it oo tight and give your wrist a rest by removing the watch after an extended period of wear. If you feel soreness, tingling, numbness, burning or stifness in your hands or wrists while or after wearing the watch, please immediately discontinue use.

MAINTENANCE INSTRUCTIONS

• Keep the device dry and clean regularly and especiall after prolonged use as moisture and dirt can build up underneath the band and can cause skin irritation.
• Do not wear the device 100 tight but make sure that the bottom sensor is lightly in contact with your skin and there is 3 gap of about one finger’s width between the wrist strap and your wrist
• Do not use housshld cleaners to clean the device. Use soap-free cleaners instead.
• For stains that are difficult o remove, tis recommended to serub with alcohol.
• The device is not suitable for diving, swimming in the sea or sauna; it i suitable for swimming pools, showers (cold water) and swimming in shallows.
• Keepit away from direct sunlight, high temperatures or humid conditions as it may damage the band over time.

CUSTOMER SUPPORT

If you experience any problem with the watch it may be fixed by restarting your watch. For any assistance, please reach out to us at link: https://fsupport.gonoise.com/support/home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>