beko VRR61414VB Robot Vacuum Cleaner User Manual

beko VRR61414VB Robot Vacuum Cleaner User Manual

VRR 61414 VB

Please read this guide first!
Dear Customer,
Thank you for choosing a Grundig product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with the state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference. Include this guide with the unit if you hand it over to someone else. Observe all warnings and information herein and follow the instructions.

Symbols and their meanings

Following symbols have been used throughout this guide:

1 Important safety and environmental instructions

This section contains safety instructions to prevent hazards that can result in injury or property damage.

Any warranty is void if these instructions are not followed.

1.1 General safety

• This appliance complies with international safety standards.

• This appliance can be used by children 8-yearsold over 8 years of age, people with physical, sensory or mental challenges or people with lack of experience or knowledge; as long as control is ensured or information is provided regarding safe usage of the device and the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unattended children.

• Do not use the appliance if the power cord or the appliance is damaged. Contact authorised service.

• Keep the appliance and its cable out of the reach of children under 8 years of age.

• Do not power your device with multi socket.

• Your mains power supply should be in align with the specified information on the type tag of the appliance.

• Do not use the appliance with an extension cord.

• To prevent damage to the power cord, prevent it from being pinched, crimped or rubbed against sharp edges.

• Do not touch the plug of the appliance with damp or wet hands while the appliance is plugged in.Do not pull on the cord while unplugging the appliance.

• Do not vacuum flammable materials and ensure that the cigarette ashes are cooled down before vacuuming them.

• Do not vacuum water and other fluids.

• Protect the appliance against precipitation, humidity and heat sources.

• Do not use the appliance in or near explosive or flammable environments and substances.

• Unplug the appliance before cleaning and maintenance.

• This product is not designed for commercial use, it is intended for use at home and in applications as follows:
  – In the staff kitchens of the stores, offices and other working environments,
  – In farm houses,
  – By customers in hotels, motels or other accommodation facilities;  – In hostels, or similar environments.
  – Sleeping places and breakfast environments

• Do not immerse the appliance or its power cord in water for cleaning.

• Do not disassemble the appliance.

• Use only original parts or parts recommended by the manufacturer.

• To prevent blockage of the filter or damage to the motor, do not vacuum cement, plaster or fragments of compressed paper.

• Use the appliance with the adapter delivered with the appliance only.

• Do not use the appliance without filters, it may get damaged.

• If you keep the packaging materials, keep them out of the reach of children.

• This appliance is not intended to be used by persons, including children, with physical, sensory and mental disabilities or those who have not adequate experience and knowledge regarding its use, unless they are under the supervision of a person responsible for their safety or they are informed about the operation of the appliance.

• The children shall be supervised to prevent them from playing with the appliance.

• Unplug the adapter and before any cleaning or maintenance procedure.

• To avoid any risk of hazard, a damaged adapter shall be replaced by the manufacturer, the authorised representative of the manufacturer or a similarly qualified technician.

• Keep your fingers, hair and loose clothes away from moving parts or clearances while vacuuming.

• Please discard used batteries in accordance with local laws and regulations.

• The batteries in this appliance may only be replaced by the authorised service.

• Do not use batteries of different types or old and new batteries together.

• Do not short circuit the supply terminals.

• Shall be used with ME1XXFG CM 2600 mAh batteries only.

• This appliance shall not be operated by children and people with limited physical, sensory and cognitive skills or people with lack of experience and knowledge unless they are under supervision or they are provided with the relevant instructions.

• The children shall be supervised to prevent them from playing with the appliance.

• Do not put weight on the appliance. Make sure that the children and domestic animals do not get on the appliance.

• Do not run the appliance on high grounds like table or chair.

1.2 Compliance with the WEEE regulations and waste disposal

This product complies with EU WEEE Directive (2012/19/EU).
This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to offical collection point for recycling of electrical and electronic devices.

To find these collection systems please contact to your local authorities or retailer where the product was puchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

1.3 Packaging information
The product’s packaging is made of recyclable materials, in accordance with the National Legislation.

Do not dispose of the packaging waste with the household waste or other wastes, dispose it to the packaging collection areas specified by local authorities.

1.4 Waste batteries
This symbol on rechargeable batteries/ batteries or on the packaging indicates that the rechargeable battery/battery may not be disposed of with regular house hold rubbish. For certain rechargeable batteries/batteries, this symbol may be supplemented by a chemical symbol.

Symbols for mercury (Hg) or lead (Pb) are provided if the rechargeable batteries/ batteries contain more than 0,0005 % mercury or more than 0,004 % lead.

Rechargeable batteries/batteries, including those which do not contain heavy metal, may not be disposed of with household waste. Always dispose of used batteries in accordance with local environmental regulations. Make enquiries about the applicable disposal regulations where you live.

1.5 What to do for energy saving

• When using your appliance, adjust the speed settings according to the surface, in order to save energy.
• Normally, lower speeds are used when cleaning hard surfaces while high speeds are used for cleaning carpets.

1.6 Compliance with the RoHS Directive
The appliance you have purchased complies with the EU‘s RoHS Directive (2011/65/EU) It does not contain the harmful and forbidden substances specified in the directive.

2. Box content

3 Overview

2.1 Checks and components
1. Lidar
2. Upper body
3. Central body
4. Start Cleaning-Pause
Button / Sending to
Charging Stand button
5. Bumper sensor
6. Front bumper
7. Front bumper hitting sensor
8. Charging pins
9. Fall prevention sensor
10. Charging pins
11. Front rotating wheel
12. Rotating brush
13. Rotating brush cover
14. Rear wheel
15. Side brush
16. Charging dock
17. Charge adaptor
18. On/Off button
19. Robot vacuum container
20. Container opening button
21. Filter opening area
22. Cleaning brush
23. EPA filter

2.2 Conformity
declaration for CE Arçelik A.Ş. hereby declares that this appliance complies with Directive 2014/53/EU.

The complete text of the EU declaration of conformity is available in the following internet address: – Products, from :beko.com

2.3 Technical data

RF exposure information : The maximum allowed exposure level is calculated according to the 20 cm distance between the appliance and the human body. To comply with the RF exposure condition, a distance of 20 cm should be put between the appliance and the person.

The rights to make technical and design changes are reserved.

3 Overview

4 Installation

1- Remove the protective sponges.

2- Install the charging station.
Install the adaptor plug to the charging station and set the cables up to prevent the adaptor cable from wrapping around the machine during vacuuming.

Install the charging station in a location where it can easily be accessed by the vacuum cleaner. Install the charging station on a hard and level ground rather than a carpet.

To ensure a smooth operation of the robot, it is advised that no obstacles are present within 1.5 m on the front and within 0.5 m on the left and right sides.

4 Installation

5 Operation

• Please charge the machine before first use.
• If the product will not be used for a long period of time; fully charge it then turn off the power switch to preserve battery life.
  The product should be recharged at least once every three months.

5.1 Intended use
This appliance is intended for household use and it is not suitable for industrial use.

5.2 Charging the appliance
1. Bring the on-off button on the side to the on position for the initial power up.

2. Place the appliance to the dust collection station so that it shall be aligned with the charging communication pins.

Charging starts after the lighting indicator of charging station flashes 3 times and then it is turned off completely.

5.3 Operation
For the first operation, bring the ON/OFF button on the side from “O” to “I” position. Press “ ” button on the robot vacuum cleaner for 3 seconds to turn it on.

• Do not turn off the appliance using ON/OFF button directly during cleaning; otherwise the data of the robot vacuum cleaner cannot be saved.
• If the ON/OFF button is on OFF position, the robot vacuum cleaner will be turned on automatically when it is placed on the charging dock and turned off automatically when it is removed from the charging dock.
• If the robot vacuum cleaner will not be used for a long period of time, bring the ON/ OFF button to off position.

Starting the cleaning

Pausing

Point cleaning

Vacuum power selection
(Supported with the relevant mobile application only) You may select the desired cleaning power from the application:
• Quiet
• Standard
• Powerful
• Maximum

Remote controlled cleaning
(Supported with the relevant mobile application only) You may direct the robot vacuum cleaner to the area to be cleaned by using the manual remote control mode through the application.

Sleep
The robot vacuum cleaner switches to sleep mode automatically if it remains stationary for 10 minutes. The robot vacuum cleaner switches to sleep mode automatically 10 minutes after it is completely recharged. The sleep mode deactivates the current task.

Resetting the system
Press “ ” button for 15 seconds in standby position to reset the system. When the system is reset, the map and the original settings (including virtual limits) on the robot vacuum cleaner are deleted.

For APP account delete, the customer can press “remove the product and clear the account” button on the APP to delete all the data on the APP and cloud like maps, clean histories, shared machine, WIFI account password…etc.

5.3.1 Operation with the application
Download the application
To download the application, search for “HomeDirect-SDA” application in the mobile app store. Review the mobile application manual for detailed information.

Add a device

• Open the app, create a new account and follow the instructions in the application.
• Before setting up the Wi-Fi, ensure that the robot vacuum cleaner and the Wi-Fi network meet the following requirements.

A. Robot Vacuum Cleaner:

• The charging level of the robot vacuum cleaner shall be over 20% or the robot vacuum cleaner shall be placed on the charging dock.

B. Wi-Fi network:

• Make sure the password of your wireless network (modem) is correct.
• Do not use any VPN (Virtual private Network).
• Wi-Fi router shall support, 802.11b/g/n and IPv4 protocols.
• The router shall be in the 2.4GHz frequency band or a dual-band router that supports the 2.4GHz band shall be used. The robot vacuum cleaner does not support the 5GHz frequency band.
• If the robot vacuum cleaner cannot connect the 2.4/5GHz dual-band Wi-Fi network, please select 2.4GHz network for Wi-Fi settings. You may switch back to the other frequency band when the setting is completed.
• If you are connecting to a hidden network, please ensure that you enter the network name [SSID (sensitive to capitalization)] correctly and that you are connected to a 2.4GHz wireless network.
• If you are using a wireless network extender, please ensure that the network name (SSID) and the password are the same with the main network.

Wi-Fi connection error

Network security requirements:
Use TKIP, PSK and AES/CCMP encrypted WPA and WPA2 networks.

5.3.2 Operation modes
Map Management
A. Real time mapping
Real time creation of a house map may help you understand the cleaning route and the cleaning environment easily. A map of the house is created after cleaning. The map is updated in real time during each vacuuming operation to ensure a normal navigation. To create a complete house map;

a. Open the doors of your rooms for the robot vacuum cleaner to map each room;
b. Remove any objects that may cause obstruction or blockage of the robot vacuum cleaner;
c. Do not change the location of the charging dock or unplug it after the map is created.

B. Repositioning and remapping
If the robot vacuum cleaner is relocated or significant changes are made in the environment, the robot vacuum cleaner tries to reposition to adapt to the new environment and may create the relevant map again. The details are as follows:
a. If repositioning is successful, the robot vacuum cleaner continues on cleaning;
b. If repositioning is unsuccessful, the robot vacuum cleaner starts over to scan in order to make the mapping again.

WARNING: Ensure that the robot vacuum cleaner always starts the  cleaning operation from the charging dock.

During cleaning, do not intervene in the robot vacuum cleaner or change its location.

Room cleaning mode (Supported by the relevant mobile application only)
You may specify the rooms you want to be cleaned with the mobile application, then the robot vacuum cleaner cleans only the room(s) that is/are marked in the map.

• The robot vacuum cleaner may also enter the areas other than the selected area after it starts cleaning; thus please remove the obstacles on the ground around the selected area. Area selection does not provide a secure isolation.
• Regional cleaning may only be started after the robot vacuum cleaner successfully creates a map.

Regional cleaning mode (Supported by the relevant mobile application only)

6 Cleaning and maintenance

Turn off the appliance and unplug it before cleaning it.

6.2 Cleaning of the brush
1. Open the upper cover of the main brush by pressing on the tabs. Pull and remove the main roll upwards. Cut the hair lapped on the roller brush with the cutting and sharp side of the cleaning brush. Then clean the dusts on the roller brush with the bristles of the cleaning brush.

6.3 Cleaning and installation of the side brush

In the long term use, wash the side brush with warm water in order to eliminate the shape deformation. Install it to the robot as it is shown after it has dried.

6.4 Cleaning of the sensors
Clean the sensors and charging pins/electrodes regularly and remove the dust using a dry and soft cloth or a cleaning brush.
Information: You get a notification via the application when sensor cleaning is required.

7 Troubleshooting

General Error Conditions

Failure List
When the robot vacuum cleaner switches to the error position, the illuminated home button on the upper body starts to blink red and gives an audible warning. Follow the audible warning to resolve the fault.

Read More About This Manual & Download PDF:

References

• Beko Global

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>