Software s Engraving and Cutting with LaserGRBL Software User Guide

Engraving and Cutting with LaserGRBL Software
User Guide

Connect the machine

Unlok Buttons

Engraving

1. Click the “Import” button
2. Select the engraving image
3. Click “Open”
4. Brightness, contrast, black and white limit adjustment
5. Select “Line to Line Trace”
6. The quality is modified to 10Lines/mm
7. Click “Next”
8. The Engraving Speed is modified to 20000mm/min
9. Select “M4-Dynamic Power” for laser mode
10. 5-MAX 1000
11. The size can be modified according to your needs
12. Click “Create”

Note: The engraving parameters are only for learning and reference, and the actual use will be affected by factors such as materials and engraving images!

Cutting

1. Select “Vectorize”
2. Click “Next”
3. The Border Speed is modified to 100mmim in
4. Select “M3-Constant Power” for laser mode
5. S-MAX 1000
6. The size can be modified according to your needs
7. Click “Create”

Note 1: The cutting parameters are for learning and reference only, and the actual use will be affected by factors such as material and thickness!
Note 2: The same material, such as wood, will have different effects due to different tree ages and resins. In order to achieve the best results, multiple attempts are required!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>