Software s S4 MK3 Silent Echo Mod Installation Guide
- June 3, 2024
- Software s
Table of Contents
Software s S4 MK3 Silent Echo Mod
Configure IAC Driver
The IAC (inter-application-communication) Driver is already built into macOS. By enabling this driver, you are creating a virtual MIDI cable which is required for the “Vinyl” button function.
- Open Audio MIDI Setup (Applications –> Utilities –> Audio MIDI Setup)
- Click on “Window ” menu and select “Show MIDI Studio”. The new window will appear.
- Double-click on the “IAC Driver” device to open settings.
- Check the “Device is online”box to activate IAC Driver.
- Close the Audio MIDI Studio and with your Kontrol S4 MK3 connected, start Traktor.
Configure Traktor Mapping Devices
Before you continue, it is strongly recommended to backup your mappings and settings in case you will need them again because those will be overwritten in Step 3. To do so, click on bigger Export button, leave all categories selected and then click on OK.
INSTALLATION
-
Start Traktor and click on gear symbol to open Preferences.
-
Click on bigger Import button.
-
Navigate to the place on your Mac where mapping file is saved and double click to open it. When the new window ask which categories should be imported, only “controller mappings” and “effect settings” should be selected automatically. Then click on OK.
Important Note : Repeat steps 2 and 3 once again to successfully import new effect settings. Otherwise you will see wrong effects go PAD FX modes.
Once the mapping is imported you will see 3 different Mapping Devices in the Devices menu.
Make sure that In-Port and Out-Port for each of 3 Mapping Devices are assigned as the following image illustrates.
-
This step is optional. In case that you wish to add and use some other mappings along side this one you can use smaller “ADD…” button.
Preferences –> Controller Manager –>Device Setup –> Device –> Add… –> Import TSI –> Import Other.
That is all Feel free to send feedback about this mapping to vstimidi@gmail.com