Software s Portable WiFi Launch Software Installation Guide
- June 3, 2024
- Software s
Table of Contents
Software s Portable WiFi Launch Software
Note:
- This guide only explains the automatic installation steps of the product receiving WiFi function; if you want to startTo use the WiFi function of the product, you need to download the corresponding “Portable WiFi Launch Software”
- The different configuration in different computer may cause the self-drive function is not workable. Pis open “Computer” and double check “CO” to start self-drive function.
Auto-Installation
It is similar installation steps in Windows 10/8.1/8/7/XP. Take Windows 7 as an example as below. Insert the wireless adapter into the computer, then click
Apply Autoinst. exe
Installation Finished
Pis wait for wi reless adapter to be initialized. It will be show down automatic ally after it is fini shed, then wireless connection icon will appear at the right corner in the computer
Network
Connection
Click wi reless connection icon.., and then choose the available WiFi signal.
This equipment complies with FCC radiation exposurelimits set forth for an uncontrolled environment. This equipment should be installed and operatedwith minimum distance 20 cm between the radiator & your body.
This product needs to be installed on afixed host and the distance from theantenna to the human body needs to begreater than 20cm
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiofrV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Customer Data
