Software s ROBOTIC ARM USB Interface Kit Instruction Manual

Software s ROBOTIC ARM USB Interface Kit

Assembly and Instruction Manual

Contents

USB INTERFACE KIT FOR ROBOTIC ARM:

1. Product Introduction
2. Tools You May Need
3. Mechanical Parts List
4. Disconnect the wired controller and PCB from Robotic Arm
5. Install USB PCB and cover
6. How it works

USB INTERFACE KIT FOR ROBOTIC ARM

Product Introduction:
This is an optional USB Interface Kit which connects Robotic Arm to Windows personal computer USB port.

Tools You May Need:

• Screwdriver

Mechanical Parts List:

Disconnect the wired controller and PCB from Robotic Arm:

1. Move your Robotic Arm to the position as shown.
2. Disconnect the controller.
3. Unplug 5pcs black connectors.
4. Unscrew yellow cover.
5. Unscrew 3pcs PCB screws.
6. Unplug 3pcs connectors.

Install USB PCB And Cover:

1. Fix USB PCB with 3pcs screws.
2. Screw P2 PCB cover tightly.

See operation details from the enclosed CD-R.

How It Works:

• All the five gearboxes equipped with safety gear, when the arm open, close, up or lower to the maximum position, and user keeps pushing the buttons, the safety gear will start to work to protect the gearbox and make ‘da, da, da…’sound.
• To extend the life of gearbox, release the buttons once you hear the safety gear emit ‘da, da, da’ sound.
• Please download Adobe Acrobat Reader for the Robotic Arm Use’s Manual.(www.adobe.com)

Finished Product:

4350001511D

Product Usage Instructions

1. Disconnect the wired controller and PCB from Robotic Arm by following steps 1-6 under “Disconnect the wired controller and PCB from Robotic Arm” section in the manual.
2. Install the USB PCB and cover by following steps 1-2 under “Install USB PCB And Cover” section in the manual.
3. Connect the USB Interface Kit to the Windows personal computer USB port.
4. Refer to the enclosed CD-R for operation details on how to use the Robotic Arm with the USB Interface Kit.
5. When using the Robotic Arm, keep in mind that all the five gearboxes are equipped with safety gear. If the arm is opened, closed, up or lowered to the maximum position and buttons are kept pushed, the safety gear will start working to protect the gearbox and make ‘da, da, da…’ sound. To extend the life of gearbox, release the buttons once you hear the safety gear emit ‘da, da, da’ sound.

Product Introduction

This is an optional USB Interface Kit which connects Robotic Arm to Windows personal computer USB port.

Tools You May Need

Screwdriver

Mechanical Parts List

Disconnect the wired controller and PCB from Robotic Arm:

1. Move your “Robotic Arm” to the position as shown.

Install USB PCB And Cover

How It Works

See operation details from the enclosed CD-R.

Note:

1. All the five gearboxes equipped with safety gear, when the arm open, close, up or lower to the maximum position, and user keeps pushing the buttons, the safety gear will start to work to protect the gearbox and make ‘da, da, da…’sound.
2. To extend the life of gearbox, release the buttons once you hear the safety gear emit ‘da, da, da’ sound.
3. Please download Adobe Acrobat Reader for the Robotic Arm Use’s Manual.(www.adobe.com)

References

• Adobe: Creative, marketing and document management solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>