beko BM3WFU4821WC Washing Machine User Manual
- September 11, 2024
- Beko
Table of Contents
BM3WFU4821WC Washing Machine
“`html
Product Information
Specifications
- Model: BM3WFU4821WC
- Date: 23.07.24 16:29
- Recyclable materials
- Hot surface warning
Product Usage Instructions
1. Safety Instructions
It is essential to follow safety instructions to ensure the safe
operation of the washing machine:
1.1 Intended Use
Use the washing machine for its intended purpose only, as
outlined in the user manual.
1.2 Safety of Children, Vulnerable Persons, and Pets
Ensure the safety of children, vulnerable persons, and pets by
keeping them away from the machine during operation.
1.3 Electrical Safety
Follow electrical safety guidelines to prevent electrical
hazards. Make sure the electrical connection is secure and
grounded.
1.4 Handling Safety
Handle the machine with care to avoid any physical injuries
during installation or maintenance.
1.5 Installation Safety
Properly install the washing machine in a safe location
following the installation instructions provided in the manual.
1.6 Operational Safety
Operate the machine according to the instructions to prevent
accidents and ensure optimal performance.
1.7 Maintenance and Cleaning Safety
When performing maintenance or cleaning tasks, ensure the
machine is unplugged and follow safety precautions to avoid
injuries.
2. Important Instructions for Environment
Follow these guidelines to minimize the environmental impact of
using the washing machine:
2.1 Compliance with WEEE Directive
Comply with the WEEE Directive for proper disposal of electronic
waste.
2.2 Package Information
Refer to package information for recycling details and proper
disposal methods.
Frequently Asked Questions (FAQ)
Q: What should I do if the washing machine displays an error
code?
A: Error codes indicate specific issues. Refer to the user
manual for error code explanations and troubleshooting steps. If
you need further assistance, contact customer support.
Q: How often should I clean the detergent drawer and drum?
A: Regularly clean the detergent drawer and drum to maintain
optimal washing performance. Follow the cleaning instructions in
the user manual for best results.
“`
EN
Washing Machine
User Manual
BM3WFU4821WC
1911862352/ EN / 23.07.24 16:29
Please read this user manual first!
Dear Customer, Thank you for choosing Beko product. We hope that you get the
best results from your product which has been manufactured with high quality
and state-of-the-art technology. Therefore, please read this entire user
manual and all other accompanying documents carefully before using the
product. Follow all warnings and information in the user manual. Thus, you
protect yourself and your product against possible dangers. Keep the user
manual. If you hand over the product to someone else, provide the user manual
as well. Warranty terms, usage and troubleshooting methods of your product are
in user guide. Symbols and Definitions The following symbols are used in the
user guide:
Danger that could result in death or injury. Important information or useful
hints about usage. Read the user manual. Recyclable materials.
Hot surface warning.
WARNING Danger that may result in property damage to the product or its
environment.
EN / 2
Table of Contents
1 Safety Instructions ………………….. 4
1.1 Intended Use……………………………. 4
1.2 Safety of Children, Vulnerable
4
Persons and Pets ……………………..
1.3 Electrical Safety……………………….. 5
1.4 Handling Safety ……………………….. 6
1.5 Installation Safety…………………….. 6
1.6 Operational Safety……………………. 8
1.7 Maintenance and Cleaning Safety 9
2 Important Instructions for Envir- 10 onment …………………………………….
2.1 Compliance with WEEE Directive . 10 2.2 Package Information………………… 10
3 Technical Specifications………….. 11
4 Installation………………………………. 12
4.1 Appropriate Installation Location. 12 4.2 Assembly of Bottom Panel Cov- 12
ers…………………………………………… 4.3 Removing Transportation Safety 13
Bolts ……………………………………….. 4.4 Connecting to Water Supply ……… 13 4.5 Connecting
the Drain Hose to the 14
Drain ……………………………………….. 4.6 Adjusting the Stands ………………… 14 4.7 Electrical
Connection ……………….. 14 4.8 Start Up …………………………………… 15
5 Preliminary Preparation …………… 15
5.1 Sorting the Laundry ………………….. 15 5.2 Preparing Laundry for Washing…. 15 5.3 Tips for Energy and Water Saving 16 5.4 Loading the Laundry…………………. 16 5.5 Correct Load Capacity ……………… 16 5.6 Using Detergent and Softener …… 16 5.7 Tips for Efficient Washing ………… 18 5.8 Displayed Programme Duration … 19
6 Operating the Product……………… 19
6.1 Control Panel …………………………… 20 6.2 Symbols on the Display…………….. 21 6.3
Programme and Consumption 22
Table……………………………………….. 6.4 Programme Selection ………………. 24 6.5 Programmes
……………………………. 24 6.6 Temperature Selection……………… 26 6.7 Spin Speed Selection
……………….. 27
6.8 Auxiliary Function Selection………. 27 EN 6.8.1 Auxiliary Functions………………… 28
6.8.2 Functions/Programmes Selec- 29
ted by Pressing the Function Keys for 3 Seconds ……………….. 6.9 End Time
…………………………………. 29 6.10 Starting the Programme……………. 30 6.11 Loading Door
Lock……………………. 30 6.12 Changing the Selections After 31 Programme has Started
……………. 6.13 Cancelling the Programme ……….. 31 6.14 End of Programme…………………….
32
7 Maintenance and Cleaning ……….. 32
7.1 Cleaning the Detergent Drawer ….. 32 7.2 Cleaning the Loading Door and 32
the Drum………………………………….. 7.3 Cleaning the Body and Control 33
Panel ……………………………………….. 7.4 Cleaning the Water Intake Filters.. 33 7.5
Draining Remaining Water and 33
Cleaning the Pump Filter ……………
8 Troubleshooting ………………………. 34
9 DISCLAIMER / WARNING …………. 38
EN / 3
1 Safety Instructions
EN
This section includes the safety instructions necessary to prevent the risk of
personal injury or material damage. Our company shall not be held responsible
for damages that may occur if these instructions are not observed. ·
Installation and repair opera-
tions shall always be performed by Authorised Service. · Use original spare
parts and accessories only. · Do not repair or replace any component of the
product unless it is clearly specified in the user manual. · Do not modify the
product.
1.1 Intended Use
· This product has been designed for domestic use. It is not for commercial
purposes or it should not be used out of its intended use.
· The product must only be used for washing and rinsing of laundry that are
marked accordingly
· This appliance is intended to be used in household and similar applications.
For example;
Personnel kitchens of stores, offices and other work environments;
Ranches,
By customers of hotels, motels and other accommodation facilities,
Bed and breakfasts, hostellike environments,
Common areas of apartment blocks or laundries.
1.2 Safety of Children, Vulnerable Persons and Pets
· This product may be used by children aged 8 years and older and persons with
underdeveloped physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a the product safe way and the hazards involved.
· Children under the age of 3 should be kept away unless continuously
supervised.
· Electrical products are dangerous for children and pets. Children or pets
should not play with, climb on top or inside the product. Check inside the
product before use.
· Use child lock to prevent children from intervening with the product.
EN / 4
· Do not forget to close the loading door when leaving the room where the
product is located. Children and pets may get locked inside and drown.
· Children should not perform cleaning and user maintenance works without an
adult’s supervision.
· Keep the packaging materials away from children. Risk of injury and
suffocation.
· Keep all detergents and additives used for the product away from children’s
reach.
· Cut the power cable and break and deactivate the locking mechanism of the
loading door before disposing of the product for children’s safety.
1.3 Electrical Safety
· Product should be unplugged during installation, maintenance, cleaning and
repair procedures. Unplug the product or turn off the fuse.
· Damaged power cables should be replaced by the authorised service in order
to prevent possible danger.
· Do not tuck the power cord under the product or to the rear of the product.
Do not put heavy items on the power
cord. Do not over bend, crush EN and touch the power cable to sources of heat. · Only use the original cable. Do not use cut or damaged cables. · Do not use an extension cord, multi-plug or adaptor to operate your product. · Extension cords, multi-socket outlets, adapters or portable power supplies can overheat and cause a fire. Make sure not to place power sockets and portable power supplies near or behind the product. · The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation. · Do not touch the plug with wet hands. · When unplugging the appliance, don’t hold the power cord, but the plug. · Make sure the plug is not wet, dirty or dusty. · Never connect your product to electricity saving devices. Such systems are harmful to the product.
EN / 5
1.4 Handling Safety
· Unplug the product before moving, remove the water outlet and water main
connections. Drain any water left inside the product.
· This product is heavy, do not handle it by yourself. It may cause injuries
if your product falls on you. Do not hit and drop the product while carrying.
· Do not hold parts such as the laundry loading door to lift and move the
product. The upper tray should be tightly fixed for moving.
· Carry the product in an upright position. If it cannot be carried upright,
tilt it to the right side in frontal view.
· Make sure that the hoses as well as the power cable are not folded, pinched
or crushed after the product is fitted into its place after installation or
cleaning procedures.
1.5 Installation Safety
· Check the information on the manual and installation instructions to prepare
the product for installation and make sure the electrical mains, clean water
mains and water outlet are suitable. If not, call a
qualified electrician and
EN
plumber to have them make
the necessary arrangements.
These operations are the re-
sponsibility of the customer.
· Prior to commencing the in-
stallation, be sure to switch off
the fuse to deactivate the
power supply for the line to
which the product will be con-
nected.
· This product is intended for
use at altitudes not exceeding
2000 meters above sea level.
· Check for any damage on the
product before installing it. Do
not have the product installed
if it is damaged.
· Always wear personal protect-
ive equipment (gloves, etc.)
during product installation,
maintenance and repair. There
is a risk of injury.
· Injuries may occur if hands are
put into uncovered slots. Close
the holes of the transportation
safety bolts with plastic plugs.
· Do not install or leave the
product at locations where it
may be exposed to external en-
vironment conditions.
· Do not install the product at
locations where the temperat-
ure drops below 0 ºC.
EN / 6
· Do not place the product on a carpet or similar surface. It would create
fire hazard since it cannot receive air from underneath.
· Place the product on a level and hard surface and balance with the
adjustable legs.
· Connect the product to a grounding plug protected by a fuse suitable to the
current values on the type label. Make sure the grounding is carried out by an
expert electrician. Do not use the product without suitable grounding to
local/national regulations.
· Plug the product in a socket with voltage and frequency values suitable to
those indicated on the type label.
· Do not plug the product to loose, broken, dirty, greasy sockets or sockets
that has come out their seats or sockets with a risk of water contact.
· Use the new hose set provided with the product. Do not re-use old hose sets.
Do not make additions to the hoses.
· Connect the water inlet hose directly to the water tap. The pressure from
the tap should be minimum 0.1 MPa (1 bar) and maximum 1MPa (10 bars). 10 to 80
litres of water should
be running from the tap in a EN minute in order for the product to function properly. If the water pressure is above 1 MPa (10 Bars), a pressure-reducing valve should be fitted. The maximum allowed temperature is 25°C. · Fit the end of the water discharge hose to the dirty water discharge drain, the sink or the bathtub. · Place the power cable and hoses in locations without risk of tripping. · Do not install the product behind a door, a sliding door or at another location that will prevent the door from opening completely. · If a drier is to be placed on the product, fix with a suitable connection apparatus obtained from the authorised service. · There is a risk of contact with electrical pieces when the upper trays is removed. Do not dismantle the upper tray of the product. · Place the product at least 1 cm away from the edges of furniture.
EN / 7
1.6 Operational Safety
· When you are using the appliances, use only detergents, softeners and
supplements suitable for washing machines.
· Do not use chemical solvents on the product. These materials contain an
explosion risk.
· Do not operate defective or damaged products. Unplug the product (or turn
off the fuse it is connected to), turn off the water tap and call an
authorised service.
· Do not place sources of ignition (burning candle, cigarettes, etc.) or
sources of heat (irons, furnaces, ovens, etc.) on top of or near the product.
Do not put inflammable/explosive materials near the product.
· Do not get on the product. · Unplug the product and turn
off the tap if you will not be using the product for long periods. ·
Detergent/maintenance materials may splash out of the detergent drawer if it
is opened while the machine is working Contact of the detergent with your skin
and eyes is dangerous.
· Make sure pets do not climb EN inside the product. Check inside the product
before use.
· Do not force open the locked loading door. The door will open once the
washing is completed. If the door does not open, use the solutions for
“loading door does not open” error in the Troubleshooting section.
· Do not wash elements contaminated with gasoline, kerosene, benzene,
reducers, alcohol or other inflammable or explosive materials and industrial
chemicals.
· Do not directly use dry cleaning detergent and do not wash, rinse or spin
laundry contaminated with dry cleaning detergent.
· Do not place your hands into the rotating drum. Wait until the drum no
longer rotates.
· If washing laundry at high temperatures, the discharged washing water would
burn your skin if in contact with your skin, for ex. when the draining hose is
connected to the tap. Do not touch the discharge water.
· Take the following precautions to prevent formation of biofilm and
malodours:
EN / 8
Make sure the room where the washing machine is placed is well ventilated.
Wipe the door gasket and loading door glass with a dry and clean cloth at
the end of the programme.
· The glass of the loading door will heat up when washing at high
temperatures. Therefore, do not touch the loading door glass while washing,
especially children.
· Before disposing of worn out and no longer usable items:
1. Unplug the power plug and remove it from the socket.
2. Cut the power cable and disconnect it with the plug from the appliance.
3. Break the locking mechanism of the loading door to render it inoperable.
4. Do not allow children to play with the outdated product.
1.7 Maintenance and Cleaning Safety
· Before cleaning or servicing the washing machine, unplug it or cut the power
at the fuse.
· If you need to move the product for cleaning, do not pull on the cover. The
cover can break and cause injury!
· Do not put hands, feet and
EN
metal objects under or behind
your product. This can cause
jams, and any sharp edge can
cause personal injury.
· Use a clean, dry cloth to wipe
foreign material or dust from
the plug ends. When cleaning
the plug, do not use a wet or
damp cloth. Otherwise, there is
a risk of fire or electric shock.
· Do not wash the product with
pressure washers, by spraying
vapour, water or pouring water.
There is a risk of electrocution.
· Do not use sharp or abrasive
tools to clean the product. Do
not use household cleaners,
soap, detergent, gas, gasoline,
thinner, alcohol, varnish, etc.
while cleaning.
· Cleaning agents containing
solvents might reek poisonous
fumes( for ex. cleaning
solvent. Do not use cleaning
products containing solvents.
· There may be detergent
residues in the detergent
drawer when you open it for
cleaning.
· Do not dismantle the filter of
the discharge pump while the
product is running.
· The temperature in the ma-
chine may rise up to 90ºC.
Clean the filter after the water
EN / 9
in the machine cools down in
EN
order to avoid risk of getting
burnt.
2 Important Instructions for Environment
2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive: The product you have purchased complies with
EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited
materials specified in the Directive.
2.2 Package Information
Packaging materials of the product are manufactured from recyclable materials
in accordance with our National Environment Regulations. Do not dispose of the
packaging materials together with the domestic or other wastes. Take them to
the packaging material collection points designated by the local authorities.
EN / 10
3 Technical Specifications
Manufacturer’s name or commercial brand
Model name
Rated Capacity (kg) Maximum spin speed (cycle/min) Built-In Height (cm) Width
(cm) Depth (cm) Single Water inlet / Double Water inlet Rated voltage / Rated
frequency in hertz (V/Hz) Rated current (A) Rated power (W) Main model code
EN
Beko BM3WFU4821WC
7004440007 8
1200 No 84,5 60 54,6 + / 230 V / 50Hz 10 2200 1320
The model information as stored in the product database can be reached by
entering following website and searching for your model identifier (*) found
on energy label. https://eprel.ec.europa.eu/
EN / 11
4 Installation
Please read the “Safety Instructions” section first!
Your washing machine automatically detects the amount of laundry placed inside
when selecting a program. While installing the product, before the first use,
calibration should be done to ensure that the laundry amount is detected in
the most accurate way. To do this, select the Drum Cleaning program and
cancel the spin function. Start the program without laundry. Wait for the
program to finish, which will take about 15 minutes. The program name may
vary depending on the model. For the appropriate program selection, review the
program descriptions section.
· Preparation of the location and electrical, tap water and waste water
installations at the place of installation is under customer’s responsibility.
· Make sure that the water inlet and discharge hoses as well as the power
cable are not folded, pinched or crushed while pushing the product into its
place after installation or cleaning procedures.
· Prior to installation, visually check if the product has any defects on it.
Do not have the product installed if it is damaged. Damaged products cause
risks for your safety.
4.1 Appropriate Installation Location
· Place the product on a hard and level floor. Do not place it onto a carpet
with high pile or other similar surfaces. Placing on an improper floor shall
cause noise and vibration problems.
EN
· Total weight of the washing machine and the dryer -with full load- when they
are placed on top of each other reaches to approx. 180 kilograms. Place the
product on a solid and flat floor that has sufficient load carrying capacity.
· Do not place the product on the power cable.
· Do not install the product at places where temperature may fall below 0 ºC.
Freezing might damage your product.
· Leave a minimum space of 1 cm between the product and the furniture.
· If you will install the product on a surface with steps, never place it
close to the edge.
· Do not place the product on any platform. · Do not place heat sources such
as
cooker, irons, ovens, heater etc. on the appliance and do not use them on the
product.
4.2 Assembly of Bottom Panel Covers
With some models, the base parts of the products are completely closed. These
products do not have plugs and covers.
· In order to increase the sound comfort of the product, attach cover A after
removing the package foam.
Cover A
Tilt the machine back slightly. Rest the tabs of Cover A against the lower
panel. Complete the assembly by rotating the cover.
EN / 12
· Cover B and the Cap are optional. If available, attach cover B and the Cap.
Cover B
Rest the tabs of Cover B against the lower panel. Complete the assembly by
rotating the cover. Cap
Insert the cap by pushing it with your finger. 4.3 Removing Transportation
Safety
Bolts 1. Loosen all transportation safety bolts
with an appropriate wrench until they turn freely. 2. Bend the inner part by
pressing it at the grip areas and pull the part out. 3. Attach the plastic
covers supplied in the User Manual bag into the holes on the rear panel.
NOTICE
EN
Keep the transportation safety
bolts in a safe place to reuse when
the product needs to be moved
again in the future.
Install the transportation safety
bolts in reverse order of the disas-
sembly procedure.
Never move the product without the
transportation safety bolts properly
fixed in place.
4.4 Connecting to Water Supply
NOTICE Models with a single water inlet shall not be connected to the hot
water tap. In such a case the laundry will get damaged or the product will
switch to protection mode and will not operate. Do not use old or used water
inlet hoses on a new product. It may cause water leakage from your machine and
stain your laundry.
1. Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
2. Open the taps completely after making the hose connection to check for
water leaks at the connection points. If any leak occurs, turn off the tap and
remove the nut. Check the gasket and tighten the nut carefully again. In order
to prevent the water leaks and resultant damages, keep the taps closed when
you do not use the product.
NOTICE Remove the transportation safety bolts before operating the product.
Otherwise, the product will get damaged.
EN / 13
4.5 Connecting the Drain Hose to the Drain
1. Attach the end of the drain hose directly to waste water drain, washbasin
or bathtub.
Your house will be flooded if the water draining hose is dislocated during
water draining. There is also a risk of burning due to the high washing
temperatures. In order to prevent such situations and make sure that the
product performs water intake and drain processes without any problem, fix the
drain hose securely.
2. Connect the drain hose to a minimum height of 40 cm and a maximum height
of 100 cm.
3. Installing the water draining hose at ground level or close to the floor
(40 cm below) and then raising it makes water discharge difficult and the
laundry may come out extremely wet. Thus, follow the heights provided in the
figure.
leaks, always secure the connection between the extension hose and the
EN
draining hose of the product with a suit-
able clamp so that it does not come off
and cause leaks.
4.6 Adjusting the Stands
WARNING In order to ensure that the product operates more silently and
vibration-free, it must stand level and balanced on its feet. Ensure that the
product is balanced by adjusting the feet. Otherwise, the product may move
from its place and cause crushing, noise and vibration problems. To avoid
damaging the lock nuts, do not use any tools to loosen the nuts.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and balanced.
3. Tighten all lock nuts again by hand.
4.7 Electrical Connection
4. To prevent the waste water to go back into the product again and to ensure
easy drainage, do not immerse the end of the hose into the waste water or do
not insert it into the drain for more than 15 cm. If it is too long, cut it
short.
5. The end of the hose should not be bent, it should not be stepped on and
the hose must not be pinched between the drain and the product. Otherwise,
water discharge issues may emerge.
6. If the length of the hose is too short, use it by adding an original
extension hose. The overall length of the hose shall not be longer than 3.2 m.
To prevent water
Connect the product to a grounded outlet protected by a 16 A fuse. Our company
shall not be responsible for the damages that shall be incurred due to using
the product without grounding according to local regulations. · Connection
must comply with national
regulations. · The electrical connection cable infra-
structure of the product must be adequate and suitable for product
requirements. It is recommended to use a residual current device. · Power
cable plug must be within easy reach after installation.
EN / 14
· If the current supply to the fuse or breaker in the house is less than 16
Amps, have a qualified electrician install a 16 amp supply.
· The voltage specified in the “Technical specifications” section must be
equal to your mains voltage.
· Do not make connections via extension cables or multi-plugs. Overheating and
burning may occur due to the connecting cable.
Damaged power cables should be replaced by the authorised service in order to
prevent possible danger.
4.8 Start Up
Before starting to use the product make sure that the preparations described
in section “Environmental instructions” and “In-
5 Preliminary Preparation
Please read the “Safety Instructions” section first!
5.1 Sorting the Laundry
· Sort laundry according to type of fabric, colour, and degree of soiling and
allowable water temperature.
· Always observe the instructions given on the garment care labels.
5.2 Preparing Laundry for Washing
· Laundry items with metal attachments such as, underwiring, belt buckles or
metal buttons will damage the product. Remove the metal pieces or wash such
clothes by putting them in a laundry bag or pillow case.
· Take out all substances in the pockets such as coins, pens and paper clips,
and turn pockets inside out and brush. Such objects may damage the product or
cause noise problem.
· Put small size clothes such as infant’s socks and nylon stockings in a
laundry bag or pillow case.
stallation”. To prepare the product for washing laundry, perform first operation in
EN
Drum Cleaning programme. If this pro-
gramme is not available in your product, ap-
ply the method which is described in sec-
tion “Cleaning the loading door and the
drum”.
Some water has remained in the product due to the quality control processes in
the production. It is not harmful for the product.
· Place curtains in without compressing them. Remove curtain attachment items.
Curtain attachment items may cause pulling and tearing on the curtain.
· Fasten zippers, sew loose buttons and mend rips and tears.
· Wash “Machine washable” or “Hand washable” labelled products only with an
appropriate programme.
· Do not wash colours and whites together. New, dark coloured cottons release
a lot of dye. Wash them separately.
· Tough stains must be treated properly before washing.
· Wash trousers and delicate laundry turned inside out.
· Laundry that are subjected to materials such as flour, lime dust, milk
powder, etc. intensely must be shaken off before placing into the product.
Such dusts and powders on the laundry may build up on the inner parts of the
product in time and can cause damage.
EN / 15
5.3 Tips for Energy and Water Saving
Following information will help you use the product in an ecological and
energy/waterefficient manner. · Operate the product in the highest load
capacity allowed for the programme you have selected, but do not overload. See
“Programme and consumption table” · Observe the temperature instructions on
the detergent packaging. · Wash slightly soiled laundry at low temperatures. ·
Use faster programmes for small quantities of lightly soiled laundry. · Do not
use prewash and high temperatures for laundry that is not heavily soiled or
stained. · If you plan to dry your laundry in a dryer, select the highest spin
speed recommended during washing process. · Do not use more detergent than the
recommended amount on the detergent packaging.
Follow the instructions in “Pro-
EN
gramme and consumption table”.
When the appliances is overloaded
product’s washing performance will
drop. Moreover, noise and vibration
problems may occur.
5.6 Using Detergent and Softener
WARNING Read the manufacturer instructions on the package while using detergents, softeners, starch, bleach and decolourants, anti-lime scale and follow the dosage information provided. Use a measuring cup, if any.
5.4 Loading the Laundry
1. Open the loading door.
2. Put the laundry items into the product in a loose manner.
3. Push the loading door to close until you hear a locking sound. Ensure that
no items are caught in the door. The loading door is locked while a programme
is running. The door lock will open once the programme is completed. Then you
can open the loading door. If the door does not open, apply the solutions
provided for “Loading door cannot be opened” error in the Troubleshooting
section.
5.5 Correct Load Capacity
The maximum load capacity depends on the type of laundry, the degree of
soiling and the desired washing programme. The product automatically adjusts
the water amount according to the weight of the laundry put inside it.
The detergent drawer comprises of three compartments: (1) for prewash, (2) for
main washing, (3) for softener,
( ) a syphon piece in the softener compartment,
( ) there is a liquid detergent apparatus for liquid detergent use in the main
washing compartment.
Detergent, Softener and Other Cleaning Agents · Add detergent and softener
before start-
ing the washing programme. · Do not leave the detergent drawer open
when the washing programme is on.
EN / 16
· If you are using a programme without pre-washing, do not put detergent in
the pre-wash compartment (compartment no. “1”).
· If you are using a program with prewash, start the machine after adding
powder detergent to the prewash and main wash compartments (compartments 1 and
2).
· Do not select a programme with prewashing if you are using a detergent pod
or dispensing ball. Place the detergent pod or the dispensing ball directly
among the laundry in the product.
· If you are using a liquid detergent, follow the directions under “Liquid
detergent use” and do not forget to bring the liquid detergent apparatus to
the correct position.
Choosing the Detergent type Detergent type to be used depends on the washing
programme, fabric type and colour. · Use different detergents for coloured and
white laundry. · Wash your delicate clothes only with spe-
cial detergents (liquid detergent, wool shampoo, etc.) intended solely for
delicate clothes and at suggested programmes. · When washing dark coloured
clothes and quilts, it is recommended to use liquid detergent. · Wash woollens
at suggested programme with special detergent made specifically for woollens.
· Please review the programme descriptions part for suggested programme for
different textiles. · All recommendations about detergents are valid for
selectable temperature range of programmes.
Adjusting the Detergent Amount
EN
The amount of detergent depends on the
amount of laundry, how soiled they are and
the water hardness.
· Do not exceed the recommended dosage
values on the detergent packaging in or-
der to eliminate excessive foam and poor
rinsing problems, to save money and pro-
tect the environment.
· Use less amounts of detergent for fewer
or less soiled laundry.
Using Softeners Put the softener in the softener compartment of the detergent
drawer. · Do not exceed the (>max<) level sign in
the softener compartment. · If the softener is not fluid, dilute with wa-
ter before placing in the softener compartment.
WARNING Do not use liquid detergents or other materials with cleaning
properties unless they are intended for use in washing machines for softening
the laundry.
Using Liquid Detergents
If the Product Has a Liquid Detergent Apparatus · Press and rotate the
apparatus at where
it is shown when you want to use liquid detergents. The part falling below
will serve as a barrier for liquid detergent. · Clean with water at its place
or by removing from its place when it is necessary. Do not forget to place the
apparatus in the main washing compartment (compartment no. “2”) after
cleaning. · The apparatus should be up if you will use a powder detergent.
Only detergents, softeners and additives suitable for washing machines should be used. Do not use soap powder.
EN / 17
Use of Gel and Tablet Detergents · If the detergent is fluid and there is no
li-
quid detergent compartment in your product, place the gel detergent in the
main washing detergent compartment in first water intake. If your product has
a liquid detergent compartment, fill the compartment with detergent before
starting the programme. · If the gel detergent is not fluid or is in a capsule
liquid tablet, place directly inside the drum before washing. · Put the tablet
detergent in the main washing compartment (compartment no. “2”) or directly
inside the drum before washing. Using Starch · Put in the liquid starch,
powder starch or fabric dye in the softener compartment. · Do not use softener
and starch in the same washing programme simultaneously. · Wipe the inside of
the product with a damp and clean cloth after using starch. Using Anti-
Limescale · When necessary, only use anti-limescale produced for washing
machines.
5.7 Tips for Efficient Washing
Using Bleach and Decolourants
EN
· Select a programme with pre-washing
and add bleach at the start of pre-wash-
ing. Do not put detergent in the pre-wash
compartment. As an alternative applica-
tion, select a programme with additional
rinsing and add the bleach while the
product is receiving water to the deter-
gent compartment in the first rinsing
step.
· Do not mix and use bleach and detergent
together.
· As bleach may cause skin irritation use
only small amounts (1/2 tea cups – ap-
proximately 50 ml and rinse the laundry
well.
· Do not pour bleach directly onto the laun-
dry.
· Do not use bleach for coloured clothes.
· Select a programme with low temperat-
ure washing while using oxygen-based
decolourants.
· Oxygen-based decolourants can be used
together with detergents. However, if it
does not have the same viscosity as the
detergent, first place the detergent in
compartment no. “2” in the detergent
drawer and wait for the product to rinse
away the detergent during water intake.
Add the decolourant to the same com-
partment while the machine continues
taking in water.
Clothes
Light Colours and Whites
Colours
Black/Dark Colours
Delicates/Woollens/Silks
(Recommended temperat- (Recommended temper-
ure range based on soil ature range based on
level: 40-90 °C)
soil level: cool -40 °C)
(Recommended temperature range based on soil level: cool -40 °C)
(Recommended temperature range based on soil level: cool -30 °C)
EN / 18
Soiling Level
It may be necessary to Powder and liquid deterpre-treat the stains or per- gents recommended for
EN
form prewash.
colours can be used at
Powder and liquid deter-
gents recommended for
Heavily Soiled whites can be used at
(difficult stains such as grass, coffee, fruits and blood.)
dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains
dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Detergents
Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for heavily soiled clothes.
Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.
which do not contain de-
and the stains that are colourant should be
sensitive to bleaches.
used.
Normally Soiled
Powder and liquid detergents recommended for
(For example, whites can be used at stains caused dosages recommended by body on col- for normally soiled lars and cuffs) clothes.
Powder and liquid detergents recommended for colours can be used at dosages recommended for normally soiled clothes. Detergents which do not contain decolourant should be used.
Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for moderately soiled clothes.
Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.
Powder and liquid deterLightly Soiled gents recommended for
(No visible stains exist.)
whites can be used at dosages recommended for lightly soiled clothes.
Powder and liquid detergents recommended for colours can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain decolourant should be used.
Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for lightly soiled clothes.
Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.
5.8 Displayed Programme Duration
You can view the programme duration on the display of your machine while
selecting a programme. Depending on the amount of laundry you have loaded into
your machine, foaming, unbalanced load conditions, fluctuations in power
supply, water pressure and programme settings, the programme duration is
automatically adjusted while the programme is running.
SPECIAL CASE: At programme start of Cottons and Cotton Eco programmes, display shows the duration of half load. It is the most common use case. After programme starts, in 20-25 minutes actual load is detected by the machine. And if the detected load is higher than half load; washing programme will be adjusted accordingly and programme duration increased automatically. You can follow this change on the display.
6 Operating the Product
Please read the “Safety Instructions” section first!
EN / 19
6.1 Control Panel
EN
23
4
1
11 10 9 8 7 6 5
1 Programme Selection Button 3 Spin Level Indicator Lights 5 Start/Pause Button 7 Auxiliary Function Button 3 9 Auxiliary Function Button 1 11 Temperature Setting Button
2 Temperature Level Indicator Lights 4 Display 6 End Time Setting Button 8 Auxiliary Function Button 2 10 Spin Speed Adjustment Button
EN / 20
6.2 Symbols on the Display
EN
1
2
3
4
5
6
14 13 12 11 10 9
8
7
1 Temperature Indicator 3 Duration Information 5 Programme Follow-up Indicator
7 Delayed Start Enabled Indicator 9 Auxiliary Function Indicators 2 11
Auxiliary Function Indicators 1 13 Rinse Hold Indicator
The visuals used for machine description in this section are schematic and may
not match exactly with the features of your machine.
2 Spin Speed Indicator 4 Door Lock Is Engaged Symbol 6 No Water Indicator 8 Auxiliary Function Indicators 3 10 Child Lock Enabled Symbol 12 No Spin Indicator 14 Cold Water Indicator
EN / 21
6.3 Programme and Consumption Table
EN
Auxiliary functions
Temperature (°C) Maximum load (kg) Water consumption (lt) Energy consumption (kWh) Max RPM Fast/Intense Prewash Steam Extra rinse Water Saving
Program
Temperature °C
Bavlna
Eco 40-60
Syntetika
Extra rychlé praní
Extra rychlé praní+ Fast / Intensive Jemné prádlo / Vina/ Rucní praní Tmavé
prádlo / Dzíny Mix Cistní bubnu Dti a alergici Odstranní skvrn Kosile
SteamTherapy ColdWash
90 8 96 2,35 1200 · · · · ·
60 8 96 1,51 1200 · · · · ·
40 8 95 0,93 1200 · · · · ·
40*** 8 63,0 0,715 1200
40*** 4 39,0 0,435 1200
40*** 2 29,0 0,225 1200
60 3 70 1,15 1200 · · · · ·
40 3 68 0,55 1200 · · · · ·
90 8 66 2,16 1200 ·
··
60 8 66 1,14 1200 ·
··
30 8 66 0,17 1200 ·
··
30 2 40 0,10 1200 ·
··
40 1,5 55 0,53 800
·
40 3,5 83 0,79 1200 · · · *
40 3,5 85 0,80 800 · · ·
90 – 76 2,16 600
90 8 125 2,90 1200
**
60 4 85 1,55 1200 · ·
60 3 70 1,40 800 · · * · ·
1 1,5 0,11
–
–
8 45 0,30 1200
· : Selectable.
- : Automatically selected, cannot be cancelled.
*** : Eco 40-60 programme is a test programme according to 40 ° C temperature selection, EU regulation EU / 2019/2014 and EN 60456: 2016 / A11: 2020 standard.
– : See the programme description for maximum load.
Cold – 90 Cold – 90 Cold – 90
40-60 40-60 40-60 Cold – 60 Cold – 60 Cold – 90 Cold – 90 Cold – 90
Cold – 90
Cold – 40
Cold – 40 Cold – 40
90 20-90 30-60 Cold – 60 Cold Cold
EN / 22
Please read Installation section of the manual before first use. The auxiliary functions in the table may vary according to the model of your machine. Water and energy consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or removed. The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine. The amount of noise and humidity varies according to the spin speed; when the higher spin speed is selected during the spinning phase, the laundry contains less moisture but higher noise occurs at the end of the programme.
You can see the washing duration EN on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual duration of the wash cycle. Duration will be automatically updated soon after the washing starts. Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are generally those that wash at low temperatures for a long time. The spin speed information given at the program table indicates spin speed option shown on the control panel.
Consumption values (EN)
Temperature Selection °C
Tightening Speed (rpm)
Capacity (kg)
Program duration (h:min)
Energy con- Water con-
sumption sumption
(kWh/
(litres/
cycle)
cycle)
Laundry temperature (°C)
40
1151
8,0
03:38
0,715
63,0
33
Eco 40-60
40
1151
4,0
02:47
0,435
39,0
30
40
1151
2,0
02:47
0,225
29,0
23
Bavlna
20
1200
8,0
03:30
0,390
95,0
20
60
1200
8,0
03:30
1,510
96,0
60
Syntetika
40
1200
3,0
02:24
0,550
68,0
40
Extra rychlé praní
30
1200
8,0
00:28
0,170
66,0
23
The consumption values given for programs other than the Echo 40-60 program are indicative only.
% Of remaining humidity (%)
52,0 52,5 57,0 53,9 53,9 40,0
62,0
EN / 23
6.4 Programme Selection
1. Determine the programme suitable for the type, quantity and soiling level
of the laundry in accordance with “Programme and consumption table”.
Programmes are limited with the highest spin speed appropriate for that
particular type of fabric. When selecting a programme, always consider the
type of fabric, colour, degree of soiling and permissible water temperature.
2. Select the desired programme with the Programme Selection knob.
6.5 Programmes
· EnergySpin It ensures more effective use of your deter-gent with high
mechanical movement dur-ing washing. Thus, it preserves your wash-ing quality
without the need to apply to heat your laundry for a long time and reduces
your energy consumption. This technology is used in programs that contain
symbols or colours displayed on the panel. · Eco 40-60 In the Eco 40-60
programme, you may wash normally soiled cotton laundry that are specified to
be washed together at 40°C or 60°C. This programme is the stand-ard test
programme according to the EU environmentally friendly design and energy
labelling regulations. Although this programme washes longer than other
washing programmes, it is more efficient in terms of energy and water
consumption. Actual water temperature may be different from the stated wash
temperature. When you load the machine with less laundry (e.g. ½ capacity or
less), periods in
programme stages may automatically get shorter. In this way, energy and water con-
EN
sumption would be much less.
· Bavlna You can wash your durable cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.) in this programme. When the quick wash function button is pressed, programme duration becomes notably shorter but effective washing performance is ensured with intense washing movements. If the quick wash function is not selected, effective washing and rinsing performance is ensured for your heavily soiled laundry.
· Syntetika You can wash your laundry (such as shirts,
blouses, synthetic/cotton blended fabrics
etc.) in this programme. When the quick wash function button is pressed, the programme duration will be shortened significantly and effective washing performance is provided for your laundry that is not very dirty. If the quick wash function is not selected, effective washing and rinsing performance is ensured for your heavily soiled laundry.
· Jemné prádlo/Vlna/Rucní praní Use to wash your woollen/delicate laundry.
Select the appropriate temperature comply-
ing with the tag of your clothes. Your laundry will be washed with a very gentle wash-
ing action in order not to damage the clothes.
· Dti a alergici Applying a steam step at the beginning of
the programme allows to soften the dirt easily. Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. cotton items) that requires an anti-allergic and hygienic washing at high temperature with intensive and long washing
cycle. The high level of hygiene is ensured thanks to the steam application before the
programme, long heating duration and additional rinsing step.
EN / 24
· Odsteování You can use this program to remove the water on the
garment/inside the machine.
· Máchání Use when you want to rinse or starch separately.
· SteamTherapy Use this programme to reduce the creases and ironing times of a
small amount of unspotted cotton, synthetic or mixed laundry.
This is not a washing programme. Do not add chemicals such as detergent,
bleach, stain remover, etc. to the detergent drawer during this program.
· Kosile This programme is used to wash the shirts made from cotton, synthetic
and synthetic blended fabrics altogether. It reduces wrinkles. Steam is
applied at the end of the programme to help the wrinkle reducing function. The
special spin profile and steam applied at the end of the programme to reduce
the wrinkles on your shirts. When the quick wash function is selected, the
Pre-treatment algorithm is executed.
· Apply the pre-treatment chemical on your garments directly or add it
together with the detergent in the powder detergent compartment. Thus, you can
obtain the same performance as you obtain with normal washing in a much
shorter period of time. Usage life of your shirts increases. Do not use pre-
wash detergent if you are planning to use delay function of your machine.
Prewash detergent may pour out on your clothes and cause stains.
** It is recommended to operate the cycle EN with no more than 6 shirts to
minimize wrinkles in your shirts using this cycle. When washing more than 6
shirts, there may be differences on the wrinkle levels and humidity on shirts
at the end of cycle.
· Extra rychlé praní Use this programme to wash your lightly soiled or
unspotted cotton clothes in a short time but not for towels or heavy cottons.
The programme duration can be reduced down to 14 minutes when the quick wash
function is selected. When the quick wash function is selected, maximum 2
(two) kg of laundry must be washed.
· Tmavé prádlo / Dzíny Use this programme to protect the colour of your dark-
coloured garments or jeans. It performs high performance washing with special
drum movement even if the temperature is low. It is recommended to use liquid
detergent or woollen shampoo for dark coloured laundry. Do not wash your
delicate clothes containing wool or etc.
· Cistní bubnu Regularly clean (once every 1 to 2 months) the drum for
ensuring the required hygiene. Steam is applied before the programme to soften
the residues in the drum. Turn on the programme when the machine is completely
empty. For better results, use powder anti-limescale (drum cleaning materials)
suitable for washing machines
EN / 25
when the powder detergent function is selected. Leave the loading door half
closed after the programme ends for the inside of the machine to dry.
This is not a washing programme. This is a maintenance programme. Do not turn
this programme on when there is something inside the machine. When you attempt
to operate, the machine automatically senses that there is load inside, and
may quit or resume the programme as per the model of your machine. An
effective cleaning is not achieved if the programme is resumed.
· Mix Use to wash your cotton and synthetic clothes together without sorting
them.
· ColdWash Use to wash your medium dirty and durable cotton/synthetic laundry.
Thanks to the washing algorithm specially developed for the program, effective
washing is ensured without exposing the laundry to high temperatures.
· Odstranní skvrn The machine has a special stain programme which enables the
removal of different types of stains in the most effective way. Use this
programme only for durable colourfast cotton laundry. Do not wash delicate and
pigmenting clothes and laundry in this programme. Before washing, garment tags
should be checked (recommended for cotton shirts, trousers, shorts, t-shirts,
baby clothes, pyjamas, aprons, table clothes, bed sheets, duvet covers,
pillowcases, bathbeach towels, towels, socks, cotton underwear that are
suitable for washing at high temperature and long time). In the automatic
stain programme, you can wash 24 types of stains divided into three different
groups according to quick function selection. Depending on the selected stain
group, a special washing programme
for which duration of rinse hold, washing EN action, washing and rinsing
duration are modified. Below you can find the soil groups that can be selected
with the “Quick/Intensive” setting button: When “Intense” is selected; Sweat,
collar dirt, food, mayonnaise, salad dressing, make-up, machine oil, baby
food. When “Quick/Intense” is not selected; Blood, chocolate, pudding, grass,
mud, eggs, butter, curry. When “Quick” is selected; Tea, coffee, juice,
ketchup, red wine, cola, jam, coal
1. Select the stain programme.
2. Select the stain you want to clean by locating it in the groups above and
selecting the related group with the Quick/ Intense auxiliary function button.
3. Read the garment tag carefully and ensure that correct temperature and
spin speed are selected.
6.6 Temperature Selection
Whenever a new programme is selected, the recommended temperature for the
programme appears on the temperature indicator. It is possible that the
recommended temperature value is not the maximum temperature that can be
selected for the current programme. Press the Temperature Adjustment button to
change the temperature. Temperature decreases gradually.
No change can be made in programmes where temperature adjustment is not
allowed.
EN / 26
You can also change the temperature after the washing starts. This change can
be made if the only washing steps allow it.
If you scroll to cold wash option and press Temperature Adjustment button
again, the recommended maximum temperature for the selected programme appears
on the display. Press the Temperature Adjustment button again to decrease the
temperature.
6.7 Spin Speed Selection
Whenever a new programme is selected, the recommended spin speed of the
selected programme is displayed on the Spin Speed indicator. It is possible
that the recommended spin speed value is not the maximum spin speed that can
be selected for the current programme. Press the Spin Speed Adjustment button
to change the spin speed. Spin speed decreases gradually. Then, depending on
the model of the
product, “Rinse Hold ” and “No Spin ” options appear on the display. If you
are not going to unload your laundry immediately after the programme
completes, you can use Rinse Hold function in order to prevent them from
getting wrinkled when there is no water in the machine. This function holds
the laundry in the final rinsing water. If you want to spin your laundry after
the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start / Pause. The programme will resume. Machine drains the water
and spins the laundry.
If you want to drain the water at the end of the programme without spinning,
use No Spin function.
No change can be made in pro-
EN
grammes where spin speed adjust-
ment is not allowed.
You can change the spin speed after the washing starts if the washing steps
allow it. Changes cannot be made if the steps do not allow it.
Rinse Hold If you are not going to unload your clothes immediately after the
programme completes, you can use rinse hold function to keep your laundry in
the final rinsing water in order to prevent them from getting wrinkled when
there is no water in the machine. Press Start/Pause button after this process
if you want to drain the water without spinning your laundry. Programme will
resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press
Start/ Pause button. The programme will resume. Water is drained, laundry is
spun and the programme is completed.
6.8 Auxiliary Function Selection
Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, icons of the auxiliary function symbol that is selected together with it illuminates.
EN / 27
When an auxiliary function button that cannot be selected with the current programme is pressed, the washing machine will make a warning sound. Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active. An auxiliary function that is not compatible with the programme cannot be selected (See “Programme and consumption table”) Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled.
show the minimum programme duration, which is suitable for your less soiled laun-
EN
dry. The duration of programmes may
shorten by 50% when this function is selec-
ted. Thanks to optimized washing steps,
high mechanical agility and optimal water
consumption, high washing performance is
achieved despite the shorter duration.
· Steam This function helps to reduce the creases of your cotton, synthetic and mixed clothes,
shorten the ironing time and remove the dirt by softening. * Under conditions where the steam func-
tion is applied at the end of the programme, your laundry may be warmer at the end of
the washing. This is expected within the programme working conditions.
When you activate the steam function, do not use liquid detergent if
6.8.1 Auxiliary Functions
· Fast/Intense You can shorten or extend the programme duration with this
function. Depending on the programme selection, there may be differences in
time increases and decreases. In case the FAST or INTENSIVE led is not lit,
the appropriate programme duration is shown for your normally soiled clothes/
laundry. Depending on the programme selection, the Intensive feature can be
selected automatically. In this case, the Intensive LED on the panel will be
lit. You can use the Intensive selection to achieve a better washing
performance when washing heavily soiled laundry. You can reduce the time for
your lightly soiled laundry by pressing the Fast/Intensive button in the
programmes which come with intense being selected. When you press the button
once, the LED will turn off and you will reach the appropriate pro-
there is no liquid container or liquid detergent dosing feature. There is the
risk of staining of the clothes.
· Water Mode This auxiliary function key allows you to select the additional
functions of Water Saving, Pre-Wash, and Extra Rinse or Extra water depending
on the model of your machine. You can find detailed information about the
selection in the description of the respective auxiliary function.
· Water Saving Select this function by pressing the Water Mode additional
function key once for all programs indicated as selectable in the Program and
Consumption table. This function is intended for lightly soiled laundry that
requires only a small amount of detergent (see “Tips for Correct Washing”). It
enables environmentally friendly washing by reducing the amount of water used,
without compromising on washing performance.
gramme duration for your normally soiled clothes/laundry. When you press the same button a second time, the fast LED will light up, the time will decrease a little and it will
· Extra Rinse You can use this function for all programs indicated as selectable in the Program and Consumption table. Select this function by
EN / 28
pressing the Water Mode key twice for programs where the additional Water
Saving function can be selected, or by pressing the Water Mode key once for
programs where the additional Water Saving function cannot be selected. This
function enables the product to make additional rinsing in addition to the one
already made after the main wash. Thus, the risk for sensitive skins (babies,
allergic skins, etc.) to be effected by the minimal detergent remnants on the
laundry can be reduced.
6.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3
Seconds
· Prewash This function can be selected by pressing and holding the related
auxiliary function button for 3 seconds. A Prewash is only worthwhile for
heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
· Child Lock Use Child Lock function to prevent children from tampering with
the machine. Thus you can avoid any changes in a running programme.
You can switch on and off the machine with On / Off button when the Child Lock
is active. When you switch on the machine again, programme will resume from
where it has stopped. When the Child Lock is enabled, an audio warning will be
given if the buttons are pressed. Audio warning will be cancelled if the
buttons are pressed five times consecutively.
To activate the child lock: Press and hold the related auxiliary function
button for 3 seconds. After the countdown as “3-2-1” on the display is over,
Child
Lock symbol appears on the display. When this warning is displayed, you can release
EN
the Auxiliary Function button 3.
To deactivate the child lock: Press and hold the related auxiliary function button for 3 seconds. After the countdown as “3-2-1” on the display is over, Child Lock symbol disappears.
6.9 End Time
Time display When the end time function is selected, the remaining time until
the programme starts is shown in hours such as 1h, 2h, and the remaining time
to complete the programme after your programme starts is shown in hours and
minutes as in the 01:30 example.
Programme duration may differ from the values in section “Programme and
consumption table” depending on the water pressure, water hardness and
temperature, ambient temperature, amount and the type of laundry, auxiliary
functions selected and the changes at the mains voltage. After a certain
period of time after the end time function is activated, the machine goes into
standby mode and some LEDs on the screen turn off. If there is any user input,
the LEDs will turn on again.
With the End Time function, the end time of the programme may be set up to 24
hours. After pressing End Time button, the programme’s estimated ending time
is displayed. If the End Time is set, End Time indicator is illuminated.
EN / 29
In order for the End Time function is activated and the programme is completed
at the end of the specified time, you must press Start/Pause button after
adjusting the time.
If you want to cancel End Time function, press On/Off button to turn off and
on the machine.
When you have activated the End Time function, do not add liquid detergent in
the powder detergent compartment no 2. There is the risk of staining of the
clothes
1. Open the loading door, place the laundry and put detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required,
the auxiliary functions.
3. Set the End Time of your choice by pressing the End Time button. End Time
indicator lights.
4. Press Start / Pause. Time countdown starts.
Additional laundry can be added into the machine during the End Time
countdown. At the end of the countdown, End Time indicator turns off, washing
cycle starts and the time of the selected programme appears on the display.
6.10 Starting the Programme 1. Press Start / Pause button to start the
programme.
2. The Start / Pause button’s light which EN was off before starts to
illuminate steadily now, indicating that the programme has started.
3. Loading door is locked. The door lock symbol appears on the display after
the loading door is locked.
4. Programme follow-up indicator lights on the display will show the current
programme step.
6.11 Loading Door Lock There is a locking system on the loading door of the
machine that prevents opening of the loading door in cases when the water
level is unsuitable. “Door Locked” symbol appears on the display when the
loading door is locked.
Opening the loading door in case of power failure:
In case of power failure, you can use the loading door emergency handle under
the pump filter cap to open the loading door manually.
To avoid any water overflow before opening the loading door, make sure there
is no water left inside the machine.
1. Turn off and unplug the appliance.
2. Open the pump filter lid.
EN / 30
3. Pull down the loading door emergency handle with a tool and release. Then
open the loading door.
4. If the loading door does not open then repeat the previous step.
Switching the machine to pause mode: EN Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display.
6.12 Changing the Selections After Programme has Started
Adding laundry after the programme has started: If the water level in the
machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door
lock icon on the display goes off when the door lock is deactivated. After
adding garments, close the door and press Start/Pause button once again to
resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause
button, the door lock cannot be deactivated and the door lock icon on the
display remains on.
If the temperature of the water inside the machine is above 50°C, you cannot
deactivate the door lock for safety reasons, even if the water level is
suitable.
Changing the programme selection after programme has started: The programme
change is allowed when the current programme is running unless the Child Lock
is enabled. This action will cancel the current programme.
The selected programme starts anew.
Changing the auxiliary function, speed and temperature: Depending on the step
the programme has reached, you can cancel or activate the auxiliary functions.
See “Auxiliary function selection” You can also change the speed and
temperature settings. See `’Spin speed selection” and “Temperature selection”.
The loading door will not open if the water temperature in the machine is high
or the water level is above the loading door baseline.
6.13 Cancelling the Programme
The programme is cancelled when programme selection knob is turned to a
different programme or machine is turned off and on again using the programme
selection knob.
EN / 31
If you turn the programme selection knob when the Child Lock is enabled, the
programme will not be cancelled. You should cancel the Child Lock first. If
you want to open the loading door after you have cancelled the programme but
if it is not possible to open the loading door since the water level in the
machine is above the loading door baseline, then turn the Programme Selection
knob to Pump+Spin programme and drain the water in the machine.
7 Maintenance and Cleaning
6.14 End of Programme
EN
End symbol appears on the display when
the programme is completed.
If you do not press any button for 10
minutes, the machine will switch to OFF
mode. Display and all indicators are turned
off.
Completed programme steps will be dis-
played if you press On/Off button.
Please read the “Safety Instructions” section first!
Service life of your product extends and frequently experienced problems will
be reduced if it is cleaned at regular intervals.
7.1 Cleaning the Detergent Drawer
Clean the detergent drawer at regular intervals (once every 4 to 5 wash) as
mentioned below to prevent accumulation of powder detergent. Clean the syphon
if excess amounts of water and fabric softener mixture remains in the softener
compartment.
3. Rinse drawer and syphon in the sink with plenty of warm water. Use gloves
or suitable brush to prevent contact of residues in the drawer with your skin.
4. Firmly fit the syphon and the drawer back after cleaning.
7.2 Cleaning the Loading Door and the Drum
For products with drum cleaning programme, please see the Operating the
product section.
Repeat Drum Cleaning process in every 2 months. NOTICE: Use an anti-limescale
suitable for the washing machines.
1. Press the marked part of the syphon within the softener compartment and
then pull the drawer towards yourself to take it out.
2. Lift and remove the syphon from behind as shown.
After every washing make sure that no foreign substance is left in the
product.
If the holes on the door gasket shown in the figure is blocked, open the holes
using a toothpick.
EN / 32
Foreign metal substances will cause rust stains in the drum. Clean the stains
on the drum surface by using cleaning agents for stainless steel. Never use
steel wool or wire wool. These will damage the painted, chrome coated and
plastic surfaces. We recommend you to wipe the door gasket with a dry and
clean cloth at the end of the programme. This will remove residues on the door
gasket in your machine and prevent formation of malodours.
7.3 Cleaning the Body and Control Panel
Wipe the body of the product with soapy water or non-corrosive mild gel
detergents as necessary, and dry with a soft cloth. Use only a soft and damp
cloth to clean the control panel. Do not use cleaning products that contain
bleach
7.4 Cleaning the Water Intake Filters
There is a filter at the end of each water intake valve at the rear of the
product and also at the end of each water intake hose where they are connected
to the tap. These filters prevent foreign substances and dirt in the water to
enter the product. Filters should be cleaned if they are dirty.
1. Close the taps. 2. Remove the nuts of the water intake
hoses to access the filters on the water intake valves and clean them with an
appropriate brush. If the filters are too dirty, remove them from their places
with a pliers and clean in this way.
3. Take out the filters on the flat ends of EN the water intake hoses
together with the gaskets and clean thoroughly under running water.
4. Replace the gaskets and filters carefully and tighten their nuts by hand.
7.5 Draining Remaining Water and Cleaning the Pump Filter
The filter system in your product prevents solid items such as buttons, coins
and fabric fibres clogging the pump impeller during draining of washing water.
Thus, the water will be drained without any problem and the service life of
the pump will extend. If the product fails to drain water inside it, the pump
filter is clogged. Filter must be cleaned whenever it is clogged or in every 3
months. Water must be drained off first to clean the pump filter. In addition,
prior to transporting the product (e.g., when moving to another house) water
should be drained completely.
NOTE: Foreign substances left in the pump filter may damage your product or
may cause noise problem. If you live in areas prone to frost, remember to turn
off the water tap, disconnect the main hose, and drain the water from the
product when it’s not in use. After each use, turn off the tap to which the
mains hose is connected.
In order to clean the dirty filter and drain the water:
1. Unplug the product to cut off the supply power.
Temperature of the water inside the product may rise up to 90 ºC. To avoid the
risk of scalding, clean the filter after the water inside the product is
cooled down.
2. Open the filter cover.
EN / 33
3. Follow the below procedures in order to drain water.
If the product does not have an emergency water draining hose, in order to
drain the water:
· Place a large container at the end of the hose to collect the water from the
filter.
8 Troubleshooting
·
When the pump filter starts leaking water loosen it by turning (opposite clockwise).
EN
Fill the running water to the container you
placed in front of the filter. Keep a cloth
ready to clean the water that may spill.
· Completely turn and remove the pump fil-
ter when the water in the product leaks
out.
1. Clean any residues inside the filter as well as fibres, if any, around the pump impeller region.
2. Replace the filter.
3. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close.
Please read the “Safety Instructions” section first!
Programmes do not start after the loading door is closed. · Start / Pause /
Cancel button is not
pressed. >>> Press Start / Pause / Cancel button. · It may be difficult to
close the loading door in case of excessive loading. >>> Reduce the amount of
laundry and make sure that the loading door is closed properly.
Programme cannot be started or selected. · The product has switched to self-
protec-
tion mode due to a supply problem (line voltage, water pressure, etc.). >>>
Depending on the product model, select another program by turning the Program
Selection button or pressing and holding the On/Off button for 3 seconds to
cancel the program. Previous programme will be cancelled. See Cancelling the
Programme [} 31]
Water inside the product. · Some water has remained in the product
due to the quality control processes in the production. >>> This is not a
failure; water is not harmful to the product.
The product does not take water in. · Tap is turned off. >>> Turn on the taps.
· Water inlet hose is bent. >>> Flatten the
hose. · Water inlet filter is clogged. >>> Clean the
filter. · Loading door is not closed. >>> Close the
door.
The product does not drain water. · Water drain hose is clogged or twisted.
Clean or flatten the hose. · Pump filter is clogged. >>> Clean the
pump filter.
Product vibrates or makes noise. · Product is standing unbalanced. >>> Ad-
just the stands to balance the product. · A hard substance has entered into the
pump filter. >>> Clean the pump filter. · Transportation safety bolts are not re-
moved. >>> Remove the transportation safety bolts.
EN / 34
· Laundry quantity in the product is too little. >>> Add more laundry to the
product.
· Excessive laundry is loaded in the product. >>> Take out some of the laundry
from the product or distribute the load by hand to balance it homogeneously in
the product.
· Product is leaning on a rigid item. >>> Make sure that the product is not
leaning on anything.
There is water leaking from the bottom of the product. · Water drain hose is
clogged or twisted.
Clean or flatten the hose. · Pump filter is clogged. >>> Clean the
pump filter.
Product stopped shortly after the programme started. · Machine has stopped temporarily due to
low voltage. >>> Product will resume running when the voltage restores to the normal level.
Product directly drains the water it takes in. · Draining hose is not at adequate height.
Connect the water draining hose as described in the user manual.
No water can be seen in the product during washing. · Water is inside the invisible part of the
product. >>> This is not a failure.
Loading door cannot be opened. · Loading door lock is activated because
of the water level in the product. >>> Drain the water by running the Pump or Spin programme. · Product is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes. · Loading door may be stuck because of the pressure it is subjected to. >>> Grab the handle and push and pull the loading door to release and open it. · If there is no power, loading door of the product will not open. >>> To open the loading door, open the pump filter cap
and pull down the emergency handle po- EN sitioned at the rear side of the
said cap. See Loading Door Lock [} 30] Washing takes longer than specified in
the user manual. () · Water pressure is low. >>> Product waits
until taking in adequate amount of water to prevent poor washing quality due
to the decreased amount of water. Therefore, the washing time extends. ·
Voltage is low. >>> Washing time is prolonged to avoid poor washing results
when the supply voltage is low. · Input temperature of water is low. >>>
Required time to heat up the water extends in cold seasons. Also, washing time
can be lengthened to avoid poor washing results. · Number of rinses and/or
amount of rinsing water have increased. >>> Product increases the amount of
rinsing water when good rinsing is needed and adds an extra rinsing step if
necessary. · Excessive foam has occurred and automatic foam absorption system
has been activated due to too much detergent usage. >>> Use recommended amount
of detergent.
Programme duration does not countdown. (On models with display) () · Timer
may stop during water intake. >>>
Timer indicator will not countdown until the product takes in adequate amount
of water. The product will wait until there is sufficient amount of water to
avoid poor washing results due to lack of water. Timer indicator will resume
countdown after this. · Timer may stop during heating step. >>> Timer
indicator will not countdown until the product reaches the selected
temperature. · Timer may stop during spinning step. >>> Automatic unbalanced
load detection system is activated due to the unbalanced distribution of the
laundry in the product.
EN / 35
Programme duration does not countdown. (*) · There is unbalanced load in the product.
Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product.
Product does not switch to spinning step. (*) · There is unbalanced load in the product.
Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product. · The product will not spin if water is not drained completely. >>> Check the filter and the draining hose. · Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>> Use recommended amount of detergent.
Washing performance is poor: Laundry turns gray. (**) · Insufficient amount of detergent has
been used over a long period of time. >>> Use the recommended amount of detergent appropriate for water hardness and the laundry. · Washing has been made at low temperatures for a long time. >>> Select the proper temperature for the laundry to be washed. · Insufficient amount of detergent is used with hard water. >>> Using insufficient amount of detergent with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the laundry. · Excessive amount of detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness and the laundry.
Washing performance is poor: Stains persist or the laundry is not whitened.
EN
(**)
· Insufficient amount of detergent is used.
Use the recommended amount of de-
tergent appropriate for water hardness
and the laundry.
· Excessive laundry is loaded in. >>> Do
not load the product in excess. Load with
amounts recommended in the “Pro-
gramme and consumption table”.
· Wrong programme and temperature were
selected. >>> Select the proper pro-
gramme and temperature for the laundry
to be washed.
· Wrong type of detergent is used. >>> Use
original detergent appropriate for the
product.
· Excessive amount of detergent is used.
Put the detergent in the correct com-
partment. Do not mix the bleaching agent
and the detergent with each other.
Washing performance is poor: Oily stains appeared on the laundry. (**)
· Regular drum cleaning is not applied. >>> Clean the drum regularly. For this
procedure, see Cleaning the Loading Door and the Drum [} 32]
Washing performance is poor: Clothes smell unpleasantly. (**)
· Odours and bacteria layers are formed on the drum as a result of continuous
washing at lower temperatures and/or in short programmes. >>> Leave the
detergent drawer as well as the loading door of the product ajar after each
washing. Thus, a humid environment favourable for bacteria cannot occur in the
machine
Colour of the clothes faded. (**) · Excessive laundry was loaded in. >>> Do
not load the product in excess. · Detergent in use is damp. >>> Keep deter-
gents closed in an environment free of humidity and do not expose them to
excessive temperatures.
EN / 36
· A higher temperature was selected. >>> Select the proper programme and
temperature according to the type and soiling degree of the laundry.
Washing machine does not rinse well. · The amount, brand and storage condi-
tions of the detergent used are inappropriate. >>> Use a detergent appropriate
for the washing machine and your laundry. Keep detergents closed in an
environment free of humidity and do not expose them to excessive temperatures.
· Detergent was put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, the product can
take this detergent during rinsing or softener step. Put the detergent in the
correct compartment. · Pump filter is clogged. >>> Check the filter. ·
Draining hose is folded. >>> Check the drain hose.
Laundry became stiff after washing. (**) · Insufficient amount of detergent is
used.
Using insufficient amount of detergent for the water hardness can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness. · Detergent was put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, the product can take this detergent during rinsing or softener step. Put the detergent in the correct compartment. · Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.
Laundry does not smell like the softener. (**) · Detergent was put in the wrong compart-
ment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected product, the can take this detergent during rinsing or
softener step. Wash and clean the drawer EN with hot water. Put the detergent
in the correct compartment. · Detergent was mixed with the softener. >>> Do
not mix the softener with detergent. Wash and clean the drawer with hot water.
Detergent residue in the detergent drawer. (**) · Detergent was put in wet
drawer. >>> Dry
the detergent drawer before putting in detergent. · Detergent has gotten damp.
Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. · Water pressure is low. >>> Check the water pressure. · The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. Check the holes and clean if they are clogged. · There is a problem with the detergent drawer valves. >>> Call the Authorised Service Agent. · Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water. · Regular drum cleaning is not applied. >>> Clean the drum regularly. For this procedure, see Cleaning the Loading Door and the Drum [} 32] Too much foam forms inside the product. (**) · Improper detergents for the washing ma-
chine is used. >>> Use detergents appropriate for the washing machine. · Excessive amount of detergent is used. >>> Use only sufficient amount of detergent. · Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store in excessively hot places.
EN / 37
· Some meshed laundry such as tulle may foam too much because of their
texture. >>> Use smaller amounts of detergent for this type of item.
· Detergent was put in the wrong compartment. >>> Make sure you place the
detergent in the appropriate compartment.
· Softener is being taken early by the product. >>> There may be problem in
the valves or in the detergent drawer. Call the Authorised Service Agent.
Foam is overflowing from the detergent drawer. · Too much detergent is used.
Mix 1
tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. >>> Put detergent into the product suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleaches and etc.), reduce the amount of detergent.
Laundry remains wet at the end of the programme. (*)
EN
· Excessive foam has occurred and auto-
matic foam absorption system has been
activated due to too much detergent us-
age. >>> Use recommended amount of
detergent.
(*) The product does not switch to spinning
step when the laundry is not evenly distrib-
uted in the drum to prevent any damage to
the product and to its surrounding environ-
ment. Laundry should be rearranged and re-
spun.
(**) Regular drum cleaning is not applied.
Clean the drum regularly. See Cleaning the Loading Door and the Drum [} 32]
If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.
9 DISCLAIMER / WARNING
Some (simple) failures can be adequately handled by the end-user without any
safety issue or unsafe use arising, provided that they are carried out within
the limits and in accordance with the following instructions (see the “Self-
Repair” section).
Therefore, unless otherwise authorized in the “Self-Repair” section below,
repairs shall be addressed to registered professional repairers in order to
avoid safety issues. A registered professional repairer is a professional
repairer that has been granted access to the instructions and spare parts list
of this product by the manufacturer according to the methods described in
legislative acts pursuant to Directive 2009/125/ EC.
However, only the service agent (i.e. authorized professional repairers) that
you can reach through the phone number given in the user manual/warranty card
or through your authorized dealer may provide service under the guarantee
terms. Therefore, please be advised that
repairs by professional repairers (who are not authorized by Beko ) shall void
the guarantee.
Self-Repair Self-repair can be done by the end-user with regard to the
following spare parts: door, door hinge and seals, other seals, door locking
assembly and plastic peripherals such as detergent dispensers (an updated list
is also available in support.beko.com as of 1st of March 2021) Moreover, to
ensure product safety and to prevent risk of serious injury, the mentioned
self-repair shall be done following the instructions in the user manual for
self-repair or which are available in support.beko.com For your safety, unplug
the product before attempting any self-repair. Repair and repair attempts by
end-users for parts not included in such list and/or not following the
instructions in the user manuals for self-repair or which are available in
support.beko.com , might give raise to
EN / 38
safety issues not attributable to support.beko.com , and will void the
warranty of the product.
Therefore, it is highly recommended that end-users refrain from the attempt to
carry out repairs falling outside the mentioned list of spare parts,
contacting in such cases authorized professional repairers or registered
professional repairers. On the contrary, such attempts by end-users may cause
safety issues and damage the product and subsequently cause fire, flood,
electrocution and serious personal injury to occur.
By way of example, but not limited to, the EN following repairs must be
addressed to authorized professional repairers or registered professional
repairers: motor, pump assembly, main board, motor board, display board,
heaters etc.
The manufacturer/seller cannot be held liable in any case where end-users do
not comply with the above
The spare part availability of the washing machine or washer-dryer that you
purchased is 10 years. During this period, original spare parts will be
available to operate the washing machine or washer-dryer properly.
EN / 39
When the appliance is turned off, pressing 1 and 2 auxiliary function buttons are pressed for a long time, a 3-2-1 countdown, and the total washing cycles completed on the appliance is displayed. After the total washing cycle is displayed, the failure codes, if any, are displayed. Check the information on the screen through the table below.
On-screen Information Err SC E5
E8
E29
E17
E18 E12 E27 E84
Cause Safety algorithm is run on the appliance. Your complaint is not solved
during the
check. Pump filter may be clogged.
The machine may not be taking in water.
The product has switched to self protection mode due to a supply problem (line
voltage,
water pressure, etc.).
Excess foam is present in the machine after the completed cycle.
Spin cycle is not initiated due to an imbalance of the machine.
There may be water inside the machine. Check the water drain of the machine.
BLE connection cannot be established.
Solution
Wait for the writing to pass. After pressing the auxiliary function buttons 1
and 2, check the on-screen information.
Call the authorised service agent.
Clean the pump filter. See “Draining remaining water and cleaning the pump
filter” section. Try in spin cycle. If the issue is not resolved, call the
service.
· Turn on the taps. · Make sure there is no water outage. · Check the water
inlet hose connection, if there is any folding on the hose, straighten it. ·
Clean the pump filter. See “Draining remaining water and cleaning the pump
filter” section. · Close the front cover of the machine. Make sure that the
cover is locked. Run the machine one more time. If the issue is not resolved,
call the service.
To cancel the programme, turn the Programme Selection knob to select another
programme. Previous programme will be cancelled. See “Cancelling the
programme” section. If the issue persists, call the service.
· Store detergent in a closed and dry location. Do not store in excessively
hot places. · Use smaller amounts of detergent for porous laundry like tulle.
· Use amount of detergent appropriate to the amount of laundry and the level
of stain. · Use only sufficient amount of detergent. · Make sure you place the
detergent in the appropriate compartment. · Run the Drum Cleaning programme
with the machine empty. See “Drum Cleaning” programme If your machine does not
include Drum Cleaning programme, you can use Cotton 90C. · After running a
short programme without detergent, check the machine. If the issue persists,
call the service.
Check the laundry inside the machine. The amount of laundry may not be
sufficient. Try by increasing the amount of laundry. The laundry may be
causing an imbalance; sort out the laundry by hand and distribute evenly
inside the appliance. Retry in spin cycle.
Unplug the machine. There may be water under the machine. Clean the water
under the machine. Plug the machine again. Try running a short cycle. If the
issue persists or you see water leaking from one of the hoses, close the
valves and call the service.
See “Connecting the drain hose to the drain” section.
Check it, try connecting it. See “HomeWhiz Feature and Remote Control
Function” section. If the issue persists, call the service.
1911862352_AA_EN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>