anko BD24480MC Animated Multifunction Snowglobe Projector User Guide

anko BD24480MC Animated Multifunction Snowglobe Projector User Guide

Contents:

A. Snowglobe projector x 1

B. USB Plug x 1

C. Plastc cover x 1

Connection

A – Music function
B – Warm White LED & Colour LED mode button, On/Off button
C – Rotation On/Off button
DC 5V – DC power input jack.

Connecting Power:

1. Install 3 x AA batteries into the battery compartment (batteries not included)
   

2. Connect the USB cable to USB power source 2 power connection is available as below.
   

Operation Instruction:

Follow below step to operate your unit

1. Connect provided USB cable to USB power source or install 3 x AA batteries to battery compartment.
2. When connect to USB power or batteries, unit will be auto on 20 seconds and music will be stopped.
3. Press A button to turn on/off the music function.
4. Press B button to select color mode.
5. Press C button to turn on/off snowflake and reindeer with sleigh moving.

Product Specification:

Open the battery compartment cover at bottom of unit.
Unscrew the screw and lift the cover off.
Insert 3 x AA 1.5V batteries (not included) according to the polarity indicated in the battery compartment.
Reinstall the battery compartment cover.
Remove the batteries if they are flat or you do not use the device for a longer period of time.

Safety Instruction:

WARNING: FOR DECORATION ONLY. THIS IS NOT A TOY. KEEP AWAY FROM CHILDREN AND PET.

• Before using the unit, please read the manual carefully.
• An adult must carry out battery replacement and installation.
• Remove exhausted batteries from this product.
• Do not dispose of batteries in a fire, batteries may explode or leak.
• Do not short-circuit the battery terminals.
• Do not mix used and new batteries.
• Do not mix alkaline standard (carbon-zinc), lithium or rechargeable batteries.
• Do not mix different types of batteries.
• Do not use rechargeable batteries in this product.
• Do not recharge non-rechargeable batteries.
• Do not allow any part to come in contact with heat or a direct flame.
• Do not allow water to come into contact with the batteries or wiring.
• Install carefully to prevent any damage to the batteries.
• When installing [ 3 x 1.5V AA (LR6) ] batteries in the battery compartment, ensure the batteries are placed as marked (+)(-).
• Only the recommended batteries should be used.
• Remove batteries from product when not in use for long periods of time.
• Keep this product out of the reach of small children.
• Store unused batteries in their original packaging.
• Dispose of used batteries responsibly.
• This product is suitable for INDOOR use only.
• Remove all packaging before use.
• This product is not suitable for children under 36 months. Keep out of reach of small children.
• This product has small parts, which may pose a choking hazard if detached.
• Keep away from fire and sources of heat.
• Use provided USB cable only.
• The light source of this projector is not replaceable; when the light source reaches its end of life the projector shall be replaced.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>