CG Mobile T-01A Pro Wireless Headphones User Guide
- September 6, 2024
- CG MOBILE
Table of Contents
CG Mobile T-01A Pro Wireless Headphones User Guide
Description:
Content:
Bluetooth Headphone
x 1
Charging Cable
x 1
Aux-in Cable
x 1
Quick Guide
x 1
Product Specification
Bluetooth version: V5.4
Transmit distance: 10 meter
Battery: 3.7V / 450 mAh
Input: DC 5V / 420 mA
Charging Time: 2 hours
Playback Time: 45 hours
Driver Unit: 40mm
Sensitivity: 106±3 dB
Impedance: 32 ohm±15%
Frequency: 20hz-20Khz
Product Operation
-
Bluetooth Pairing:
-
For first pairing, press and hold button for 3 seconds to enter into pairing mode, the light will flash in Blue and Red alternatively.
-
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the headphone ‘T-01A Pro’ from the list of available Bluetooth devices. -
When the pairing is successful, Blue light will flash slowly every 5 seconds and your device will show the connected Bluetooth icon.
Note: The pairing function can be different from device to device (check the manual of your device) . -
Power On and Power Off:
Power on – Press and hold button for 3 seconds.
Power off – Press and hold button for 3 seconds. -
Bluetooth music play:
-
Open the music player, select a song to play, press the button to play music and then press again to pause music.
-
Play music and short press button to increase the volume, press and hold to change the next song.
-
Play music and short press button to decrease the volume, press and hold to change the previous song.
-
Bluetooth phone call:
-
Press the button to answer an incoming call, press the button again to end the call.
-
When the call is coming, press the button for 2 seconds to reject the call.
-
Double Press button to to switch output device during a call (Handset/ Bluetooth mode) .
-
Double Press button to Re-dial last Call.
-
Active ANC ON / OFF:
Press to switch mode among Transparent Mode / ANC on / ANC off. -
Active Voice Assistant
Triple Press button to active voice assistant (Siri/ Google Now…) .
Charging
When the Bluetooth headphone is connected with charger (or computer USB
port) by charging cable, the headphone will indicate Red light. When the
headphone is fully charged, the indicator will be off.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>