CG Mobile SAS TX1 Wireless Earbuds User Guide

September 24, 2024
CG Mobile SAS

TX1 Wireless Earbuds

“`html

Product Specifications

  • Model: TX1
  • Charging Case LED
  • Charging Port: Type-C
  • Microphone: Yes
  • FCC ID: 2A7J2-GUTWSC2M

Product Usage Instructions

Charging for Earbuds:

Fully charge the battery for 2 hours before using the earbuds
for the first time or after extended periods of non-use. Insert the
earbuds into the charging case, close the lid, and they will charge
automatically. The earbuds’ indicator will be red during charging
and turn off when fully charged.

Charging for Charging Case:

Connect the charging case to a charger or computer USB port
using the provided charging cable. The display will show increasing
power levels until fully charged, indicated by “OK.”

First Use & Pairing:

Auto Power-On & Pairing: Remove the earbuds
from the charging case to automatically power on and enter pairing
mode.

Manual Power-On & Pairing: Touch the MFB
button on both earbuds for 2 seconds to manually turn on and enter
pairing mode.

Power-Off:

Auto Power-Off: Place both earbuds back into
the charging case to automatically power off.

Manual Power-Off: Touch the MFB button on both
earbuds for 5 seconds to power off or they will auto power off
after 10 minutes of no pairing.

Wearing:

Insert the earphones into your ear canal, twist gently for a
comfortable fit and optimal sound experience.

Control:

Calls: Tap once to answer, tap twice to end,
touch for 2 seconds to reject.

Music: Tap twice to play/pause, tap once to
change tracks, touch for 2 seconds for voice assistant.

Reset:

If experiencing connection issues, turn off Bluetooth on all
devices, tap each earbud 6 times quickly to activate prompt sound,
then follow pairing instructions.

FAQ

How do I reset my earphones if I encounter connection

problems?

To reset your earphones, ensure all devices have Bluetooth
turned off and pairing records are cleared. Then tap each earbud 6
times quickly to activate prompt sound and follow the pairing
instructions provided.

“`

Description:

LED of Charging Case Charging Port of Charging Case

LED of Earbud Touch Button – MFB
Microphone Charging Pin of Earbud

FCC ID : 2A7J2-GUTWSC2M

Content:
TX1 TWS Earbuds Type-C USB Charging Cable Silicon Gel Tips (S/M)
x1 Quick Guide

x1

x2

x1

Product Specification
Bluetooth: V5.3 Frequency Range: 2402-2480 MHz Sensitivity: 110± 3dB Impedance: 32 ohm ± 15% Input: DC 5V / 500mA Earphones Battery Capacity: 30 mAh x 2 Charging Pod Battery Capacity: 300 mAh Charge Time: 1.5 hours
Charging for Earbuds:
Fully charge the battery for 2 hours before using the earbuds for the first time, or when they have been unused for extended periods. Put the earbuds into the charging case, close the lid and they will charge automatically. The indicator of earbuds will stay in red. When the earbuds are fully charged, the indicator will be off.
Charging for Charging Case:
When the charging case is connected with charger (or computer USB port) by charging cable, the units digit on the the display jumps and increases according to the power increases. When the charging case is fully charged, the display shows “OK”.
NOTE: When the charging case is out of battery, the earbuds will not turn on/off automatically when removed from or placed back into the charging case. In this case, turn the earbuds on/off manually.

First Use & Pairing

Auto Power-On & Pairing
Take the earbuds out of the charging case, the earbuds will automatically power on and enter into pairing mode.

Manual Power-On & Pairing

Touch the MFB for 2 secs on both earbuds

to turn on the earbuds. (You will hear the

prompt tone). The earbuds will

2S

2S

automatically enter pairing mode.

Connect

BLUETOOTH Bluetooth

TX1

Connected

Turn on the device’s Bluetooth setting . Search for and choose TX1 to pair, your device will show “connected” .

Quick Guide

Power-Off

Auto Power-Off
Put L&R earbuds back into charging case, the earbuds will automatically power off .

Manual Power-Off
1. Touch the MFB for 5 secs on both earbuds to power off the earbuds. 2. The earbuds will automatically turn off when without paring for 10 mins.
Wearing

5S

5S

Insert the earphones directed towards your ear canal. Twist gently until the earbuds fit comfortably and get better sound experience.

Control

Calls

Tap Once Tap Twice Touch for 2s

Music

Tap Twice Tap Once Touch for 2s

Voice Assistant

Tap 3 times

Answer Call End Call Reject Call
Play / Pause Earbud R- Volume Up Earbud L- Volume Down Earbud R- Next Track Earbud L- Previous Track
SIRI / Voice assistant

Reset
If you have problem to connect the earphones with your device, don’t worry about it, please follow the step as below: 1. Make sure all devices have turned off Bluetooth Function and pairing record have been cleaned. 2. Take the earbuds out of the case, tap each earbuds by 6 times quickly , prompt sound will be actived, then follow the pairing step as instruction.

Wireless Earphones
Model: TX1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals