CG MOBILE TWST8N Wireless Earphones User Guide

CG MOBILE TWST8N Wireless Earphones

Product Specifications

• Model: TP100
• Wireless Earphones

Product Description

• LED of Charging Case
• Touch Button – MFB
• FCC ID: 2A7J2-TWST8N
• Charging Port of Charging Case
• Charging Pin of Earbud
• Microphone

Content

• TP100 TWS Earbuds x1
• Type-C USB Charging Cable x1
• Silicon Gel Tips (S/M/L) x3
• Quick Guide x1

Product Usage Instructions

Charging for Earbuds:

Fully charge the battery for 2 hours before using the earbuds for the first time or after extended periods of non-use. Place the earbuds into the charging case, close the lid, and they will charge automatically. The indicator of the charging case will stay white for 4 seconds and then turn off.

Charging for Charging Case:

When the charging case is connected to a charger or computer USB port using the charging cable, the indicator will flash white. Once fully charged, the indicator will be lit white.

First Use & Pairing:

1. Auto Power-On & Pairing: Take the earbuds out of the charging case, and they will automatically power on and enter pairing mode.
2. Manual Power-On & Pairing: Touch the MFB on both earbuds for 2 seconds to turn them on and enter pairing mode.

Frequently Asked Questions

How do I reset the earphones if I have trouble connecting them to a device?

If you are facing connection issues, follow these steps:

1. Ensure all devices have Bluetooth turned off, and any pairing records have been cleared.
2. Take the earphones out of the case and tap each earbud five times quickly to activate the prompt sound. Then, follow the pairing instructions.

Description

Content

• TP100 TWS Earbuds
• Type-C USB Charging Cable
• Silicon Gel Tips (S/M/L)
• Quick Guide

Product Specification

• Bluetooth: V5.3
• Frequency Range: 2402-2480 MHz
• Sensitivity: 114 ± 3dB
• Impedance: 32 ohm ± 15%
• Input: DC 5V / 300mA
• Earphones Battery Capacity: 30 mAh x 2
• Charging Pod Battery Capacity: 300 mAh
• Charge Time: 1.5 hours

Charging for Earbuds:

Fully charge the battery for 2 hours before using the earbuds for the first time, or when they have been unused for extended periods. Put the earbuds into the charging case, close the lid and they will charge automatically. The indicator of charging case will stay in white for 4 seconds and be off.

Charging for Charging Case

When the charging case is connected with charger (or computer USB port) by charging cable, the indicator will flash in white. When the charging case is fully charged, the indicator will be lit-in white.

NOTE:

When the charging case is out of battery, the earbuds will not turn on/off automatically when removed from or placed back into the charging case.In this case, turn the earbuds on/off manually

First Use & Pairing

Auto Power-On & Pairing

Take the earbuds out of the charging case, the earbuds will automatically power on and enter into pairing mode

Manual Power-On & Pairing

Touch the MFB for 2 secs on both earbuds to turn on the earbuds. (You will hear the prompt tone). The earbuds will automatically enter pairing mode.

Connect

Turn on the device’s Bluetooth setting . Search for and choose TP100 to pair, your device will show “connected ****

Power-Off

Auto Power-Off

Put L&R earbuds back into charging case, the earbuds will automatically power off

Manual Power-Off

1. Touch the MFB for 5 secs on both earbuds to power off the earbuds.
2. The earbuds will automatically turn off when without paring for 10 mins.

Wearing

Insert the earphones directed towards your ear canal. Twist gently until

the earbuds fit comfortably and get better sound experience. Control

Reset

If you have problem connecting the earphones with your device, don’t worry about it, please follow the step as below:

1. Make sure all devices have turned off the Bluetooth Function and pairing record have been cleaned.
2. Take the earphones out of the case, tap each earbud by 5 times quickly , and prompt sound will be activated, then follow the pairing step as instructed.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>