moonki MW-PB250 Party Box User Guide

: October 30, 2023
: moonki

Table of Contents

moonki MW-PB250 Party Box
Product Information
Product Usage Instructions
lmportant Safety Instructions
Safety
Your Party Speaker
Get started
- Prepare the remote control
Play
Connect with Bluetooth
Connect with AUX
Connect with Wired Microphone/Guitar
Product information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

moonki MW-PB250 Party Box

Product Information

Model Number: PARTYBOX MW-PB250
Battery Capacity: 12V 4Ah

Product Usage Instructions

To use the PARTYBOX MW-PB250, follow the instructions below:

Playing Music on Bluetooth Mode

To play or pause the music, press the PLAY/PAUSE button.
To disconnect from Bluetooth, press and hold the PLAY/PAUSE button for a few seconds.
To play the previous track, press the Previous button.
To play the next track, press the Next button.
To increase the volume, press the VOLUME + button. The display will show U 00 to U 40.
To decrease the volume, press the VOLUME – button. The display will show U 00 to U 40.

Using Wired Microphone

To increase the echo volume level, press the VOLUME + button. The display will show E. Then press the button again to increase the sound volume of microphone echo.
To decrease the echo volume level, press the VOLUME – button. The display will show E. Then press the button again to decrease the sound volume of microphone echo.
To increase the volume level of microphone, press the VOLUME + button. The display will show C. Then press the button again to increase the sound volume of microphone.
To decrease the volume level of microphone, press the VOLUME – button. The display will show C. Then press the button again to decrease the sound volume of microphone.

Using Wired Guitar

To increase the volume level of guitar, press the VOLUME + button. The display will show E. Then press the button again to increase the sound volume of guitar.
To decrease the volume level of guitar, press the VOLUME – button. The display will show C. Then press the button again to decrease the sound volume of guitar.

Using AUX

To adjust the volume, press the Volume button. The display will show U.
To adjust the microphone echo volume, press the VOLUME button. The display will show E. Then press the button again to increase or decrease the microphone echo volume.
To adjust the microphone volume, press the VOLUME button. The display will show C. Then press the button again to increase or decrease the microphone volume.

lmportant Safety Instructions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may beofsufficient magnitude as to constitute arisk of electric shock to persons.
The exclamatory mark is intended to alert the user to the presence of important operatingand maintenance in structions in the lite rature accompanying the apparatus.

Safety

Read these instructions-All the safety and operating instructions should be read before this product is operated.
Keep these instructions-The safety and operating instructions should be retained for future reference.
Heed all warnings-All warnings on the product and in the operating instructions should be adhered to.
Follow all instructions-All operating and usage instructions should be followed. 5 .Caution To reduce the risk of fire or electric shook, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids.
Do not use this apparatus near water, for example, in a wet basement or near a swimming pool and the like.

Your Party Speaker

Introduction
With this unit, you can:

Enjoy files of your favorite music

What’s In the box
Check and identify the contents of your package:

Speaker
Remote control
User manual
AUX Cable( the same one cable)
AC Power cable

Overview of the Top control panel

USB Charge
Display Window
EQ button
MODE button
Decrease Volume (–)
Power ON/OFF button
AUX Input jack
Mic Menu button
Bass button
Play/Pause button
Increase Volume (+)
Previous button
LED ON/OFF button
Next button

Overview of the Rear Panel

Suitar Input jack
Microphone Input jack
Power ON/OFF Button
AC Power Input jack

Overview of the Remote Control

Power function key
Menu function key
Volume+ function key
Play/Pause function key
Previous function key
Volume- function key
Mute function key
Bass function key
Mode function key
Next function key
EQ funciton key

Get started

caution: Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.

Connect power
Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on back or the underside of the unit.
Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
Before you connect the AC power cord, make sure that you have completed all other connections

Connect the power cable to the wall socket:

Prepare the remote control

To insert the remote control batteries:

Open the battery compartment.
Insert 2 x AAA batteries with correct polarity(+/-) as indicated. The 2xAAA battery not include in our products, please purchase from Authorized Seller.
Close the battery compartment.

Please Note:

If you are not going to use the remote for a long time, remove the batteries.
Do not use old and new or different type of batteries in combination.
Batteries contain chemical substances, so they should be disposed of properly.

Turn On

Connect the AC power cable and plug to the wall socket;
Press the “POWER” button to o “ON” status to power on the speaker.
The speaker will be powered by AC power and set the power switch on rear panel to ON position.
Press the POWER button on the top panel or on the remote control to turn it into Standby mode,Press the POWER button on the top panel or on the remote control to turn off the speaker and get into Standby mode, press for a few seconds again to turn on the speaker.

Caution:
If you do not use this unit for a while, please switch the “POWER” button to “OFF” status, and disconnect the AC power cable of this unit.

Charging the internal Battery
The speaker comes with a built-in rechargeable battery, follow the below steps to charge it:

Connect the power cable and plug to the wall socket on the rear panel.
There is a battery indicator light on the bottom left corner of the display panel, it will light up and slowly flash, that is being charge.
When the battery indicator light on the top left corner of the display pane light up, the battery is fully charged, then unplug the power cable to stop charging, both top and bottom indicator light will turn off automatically.

lntrenal Battery Level indicator

When the battery is running out, the battery indicator light on the bottom left corner light up and quickly flash.
During playing, if you hear a “DI” sound from the speaker means the battery is running out and the speaker will turn off after 1 minute.
Please pay attention to the speaker sound, if the sound becomes abnormal, please charge the internal battery on time to keep the battery life.
Note: please fully charge the product when it is not going to be used for a long time and charge once a month to keep longer battery life.

Play

Basic key play operations
You can control play through following operations

Connect with Bluetooth

Press the MODE button on the Top Control panel or on the remote control to switch to the BLUETOOTH CONNECT mode, will be displayed on the screen.
Open the Bluetooth on the external device (must have Bluetooth function), and the name “MW-PB250” will show on the device, please try to connect it.
Once connected, you can hear a small sound from the speaker.
You can use the key on the Top Control panel to control the tracks of the external device.
Press button on the top control panel to disconnect the bluetooth. (This on remote control not work for bluetooth disconnect function.)
Note: This speaker do not need the password.

Connect with AUX

Press the MODE button on the Top Control panel or on the remote control to switch to the Line-in mode, (AUX) will be displayed on the screen.
.Connect this speaker to Line-in inserting jack and the external device Earphone jack by provided Line-in cable;
Once connected, turn on your external device music
You can use button on the Top control panel to control the tracks of the external device.
Caution: Please turn off the unit before connect Line-in cable in order to avoiding unexpected noise.

Connect with Wired Microphone/Guitar

Microphone

Press this Volume button for volume increase or decrease when playing music,the display will show “U”.
Press this VOLUME button to turn to the microphone echo volume adjust mode,the display will show “E”,then press the button to increase or decrease the microphone echo volume if using wired microphone.
Press this VOLUME button to the microphone volume adjust mode,the display will show “C”,then press the button to increase or decrease the microphone volume if using wired microphone.

Guitar:
If using wired guitar, the volume instruction the same as above 3 of microphone.
Important Notes

While using the microphone, avoid being put the microphone opposite the bass of Speaker, as they may have Whistler Noisy.
To get the best singing performance, keep the micro phone within 5-15cm of the mouth and at a 45 degree angle.
When using the microphone, always pay attention to the battery, if the battery is low, the indicator light will come on and the performance will progressively become poor.
Caution: Please do not put the microphone directly face to the speaker, it may damage the speaker.