moonki MD-PB360 Party Speaker User Manual

: October 30, 2023
: moonki

Table of Contents

Important Sefety Instrauuction
REAR PANL
TOP PANEL
REMOTE CONTROL
OPERATING
SPECIFICATION
Accessories-included
CAUTION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

moonki MD-PB360 Party Speaker User Manual

Important Sefety Instrauuction

1 To assure the finest performanCe, please read this manual carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances around this unit Top: 10 cm (4 inch) Rear: 10 cm (4 inch) Sides: 10 cm (4 inch)
Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from cold to hot. Do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock. fire, damage to this unit, and/or personal injury.
Avoid installing this unit where foreign objects may fall into this unit and/or this unit may be exposed to liquid dripping or splashing. Never place objects on top of this unit as they may cause damage to the unit or discolour it. Never place candles, lit objects or containers with liquids such as vases on the unit, as doing so is extremely hazardous. may cause personal injury and/or major damage to the unit
Do not cover this unit with a newspaper, tablecloth, curtain. etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury
Do not plug this unit into a wall outlet until all connections are complete.
Do not operate this unit upside down as it may overheat and cause damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet, grasp the plug: do not pull the cable.
Do not clean this unit with chemical solvents as these may damage the finish. Use a clean, dry cloth.
Only the voltage specified on this unit may be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit and/or personal injury. We will not assume any liability for damage resulting from use of this unit with a voltage other than specified.
To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a wall outlet or this unit during a lightning storm.
CAUTION: NEVER attempt to open this unit to modify, fix or repair this unit! Refer all service, repairs and maintenance to an authorised service centre.
When not planning to use this unit for long periods of time, disconnect the AC power plug from the wall outlet.
Before moving this unit, disconnect the AC power plug from the wall outlet.
Condensation may form when the surrounding temperature changes suddenly. Disconnect the power cable from the outlet and leave the unit alone until the condensation has fully dried up.
When using this unit for a long time, this unit may become warm. Turn the power off, then leave this unit to cool..
Install this unit near the AC outlet, where the AC power plug can be reached easily.
The batteries must not be exposed to excessive heat such as sunshine, fire or the like. When you dispose of batteries, follow your regional regulations.
Excessive sound pressure from earphones and headphones can cause hearing loss.
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children must be supervised to ensure that they do not play with the product.
This product is not intended to be operated by means of an external timer or separate remote control system.

REAR PANL

MIC: Wired Mic input socket
GUITAR: Guitar input socket
LINE-IN: Line-in input socket
Charging Light
POWER SWITCH: Press this switch to turn the unit ON or OFF
AC input: AC 100-240V-, 50/60Hz

TOP PANEL

STANDBY/360° LIGHT : Press this key to turn the 360° LIGHT ON/OFF. Press and hold for Standby, ON, and OFF.
SOURCE: Press this key to change the sources between BT, LINE.
X.BASS: Press the key to turn the extra bass effect ON/OFF.
MENU: Press this key to change the menu between MIC, GUITAR, VOLUME, ECHO VOLUME, BASS, TREBLE.
VOLUME -/+: To adjust the levels.
LED DISPLAY: To display speaker status.
TWS: Press to
PLAY/PAUSE a track at BT input mode. Press and hold on to change the TWS (true wireless stereo) mode on or off.
: To play the previous song at BT input mode.
: To play the next song at BT input mode.
DISCOBALL/FIRE LIGHT : Hold this key to DISOBALL on or off. Press to change the front speaker light mode between LED1,LED2,LED3,LED4,OFF

REMOTE CONTROL

STANDBY Stand by ON/OFF key.
BT Press to enter Bluetooth pairing mode.
ECHO1 To decrease the echo effect
DISCONNECT In BT, Press to disconnect and pair with a new device.
Play the previous song by pressing” BT input mode. TWS Press to the
TWS (true wireless stereo) mode on or off.
GUITER/MIC VOLTo decrease the guiter and MIC volume.
X.BASS Press this key to turn ON/OFF the extra bass effect.
TREB+ To increase the Treble effect.
TREBTo decrease the Treble effect.
VOLTo decrease the volume.
BASSTo decrease the bass effect.
VOL+ To increase the volume.
BASS+ To increase the bass effect.
GUITER/MIC VOL+ To increase the GUITER and MIC volume.
Play the next song by pressing ” ¥’¥’I ” at BT input mode.
Play / pause in BT mode.
LIGHT SHOW To change the light mode between LED1,LED2,LED3,LED4,OFF
ECHO+ To increase the echo effect
AUX Press to the AUX on or off.
MUTE Press this key to MUTE/UNMUTE the speaker volume.

Bluetooth pair and connect

Turn off any Bluetooth devices previously paired (linked) with this unit.
Turn on the Bluetooth feature on your phone or music player.
Turn on and set this unit to Bluetooth mode. The flashing :“bt” on LED display indicates it is in pairing mode.
Set your phone or music player to search for Bluetooth devices.
Select “MD-PB360” from search results on your phone or music player.
Select OK or YES to pair this unit with your phone or music player.
If protected, enter 0000 for passkey steady blue light indicates successful connection.
Hold pair key to disconnect current convection and eater pairing mode.

TWS (True Wireless Stereo) mode

Turn on 2 speaker equipments and select both unit INPUT mode as Bluetooth
Press “TWS” key on speaker set for 2 seconds, it will show ” °< “on display, TWS is connecting to another speaker equipment and will connect successfully after a sound indication or display shows “bt”
Turn on your Bluetooth feature on your mobile phone to search Bluetooth devices and select “MD-PB360” from the search result, select OK or YES to pair this unit with your mobile phones and a steady blue light will indicate the connection is successful and can play any music from your mobile phones.
Press “TWS” key on speaker unit for 2 seconds and it will turn off TWS features after shows OF on display.

(The”LEFT”channelwillbethespeakerA,theotherspeakerwillbethe”RlGHT”channeL)

OPERATING

BATTERY

In AC ( power) mode the battery will automatically charge. A slow red flashing light indicates that the battery is charging. When fully charged a green light will be displayed.

In DC ( battery) mode a green light indicates that the battery level is full. If the battery level is low a red light will be displayed. This indicates that the battery must immediately be charged or the speaker will turn off.

LINE IN

OPERATING

Power on

OPERATING

SPECIFICATION

Parlante Activo de 3 vias 3 Ways Active speaker Caixa de som ativo de 3 vias

Potencia RMS: 120W RMS Power:120W Potencia RMS: 120W

Potencia PMPO: 1800W PMPO Power: 1800W Potencia PMPO: 1800W

Frecuencia de Respuesta: 25Hz-20kHz Frequency Response: 25Hz-20kHz Frequencia de resposta: 25Hz-20kHz

Relacion Ruido/Serial: 65dB Signal to Noise Ratio: 65dB Relactic ruido/Sinal: 65dB

Impedancia: Subwoofer – 20 / Woofer – 40 / Tweeter – 80 Impedance: Subwoofer – 20 / Woofer – 40 / Tweeter – 80 Impedancia: Subwoofer – 20 / Woofer – 40 / Tweeter – 80
Subwoofer: lx8″ Woofer: lx8″ Tweeter: 1 x 1″

Rango Completo: (izquierdo, derecho y posterior): 3 x 2″ 2″ full ranges: (left, right and rear): 3 x 2″ Faixa completa: (esquerda, direita e traseira): 3 x 2″

Tiempo de Carga: 2 a 4hs (dependiendo el nivel de cargo) Charging Time: 2 to 4hs (depending on the charge level) Tempo de carregamento: 2 a 4 horas (dependendo do nivel de cargo)

Tiempo de Reproduccion: 4 a 6hs (dependiendo en el modo y volumen de uso) Playing Time: 4 to 6hs (depending on the reproduction mode and volumen) Tempo de reproducdo: 4 a 6 horas (dependendo do modo e volume de uso)

Medidas de Producto: 295298778mm Product Size: 295298778mm Medidas do produto: 295298778mm

Peso de Producto: 11Kg Product Weight: 11Kg Peso do produto: 11Kg

Dimensiones de Caja: 357350820mm Box Size: 357350820mm Dimensties da caixa: 357350820mm Peso de Caja:12.5Kg Box Weight: 12.5Kg Peso da caixa: 12,5 kg

lncluye: Control Remoto, Cable de Alimentacion, Manual de Usuario, Tarjeta de Garantia Inclui: controle remoto, cabo de alimentacdo, manual do usudrio, cartdo de garantia. Includes: Remote Control, Power Cord, User manual, Warranty card.

Rangos cornpletos de 2″ en sus lados laterales y posterior para sonido 360°” Full 2″ ranges on the sides and back for 360° sound
Faixas completas de 2″ nas laterals e nas costas para som de 360°

Bateria recargable de 16V 3.6A para horas de to musica favorita
16V 3.6A rechargeable battery for hours of your favorite music
Bateria recarregdvel de 16V 3.6A para horas de sua mOsica favorita

BT
Salida de cargo USB 5V para carga de dispositivos 5V USB charging output for device charging Saida de carregamento USB de 5V para carregamento do dispositivo

Conectd 2 parlantes entre si, para un sonido °stereo inalambrico
Connect 2 speakers together for wireless stereo sound
Conecte 2 alto-falantes juntos para som estereo sem fio

Frente del parlante iluminado con efecto de llama LED + luces de fiesta
Speaker front illuminated with LED flame effect + party lights
Frente do alto-falante iluminada com efeito de chama LED + luzes de festa

Bluetooth (5.0), Auxiliar, Entrada de microfono, Entrada de Guitarra
Bluetooth (5.0), Auxiliary, Microphone input, Guitar input Bluetooth (5.0), Auxiliar, Entrada para microfone, Entrada para guitarra

Accessories-included

Remote control

CAUTION

Avoid exposing the speaker box to moisture. If they are set up outdoors, Be Sure they ore under cover.

Do not use nor store the equipment near wet or dap places. It may cause a malfunction or shock hazard.

If the power cord is broken, it must be replaced by the manufaturer or service agent or qualifield personnel to avoid risks.

To reduce the risk of fire or electric shock, do not expose this equipament to rain or moisture.

Clean only with a soft, dry cloth

CAUTION: BEFORE USE SPEAKER BOX, PLEASE CHARGE BATTERY FULLY, IT IS BETTER FOR BATTERY LIFE. DON’T PLAY SPEAKER BOX AND CHARGE BATTERY AT THE SAME TIME, OTHERWISE IT WILL AFFECT BATTERY LIFE.