moonki MS-1600B Portable Laptop User Manual
- October 30, 2023
- moonki
Table of Contents
moonki MS-1600B Portable Laptop
Product Information
The MS-1600B is an active speaker with a rechargeable battery, designed to deliver high-quality sound for indoor and outdoor use. With a 10-inch woofer, 1.5 KSV coil, and 850g magnet, it has an RMS power of 80W and PMPO power of 1600W. The speaker also features a 25mm tweeter with a sensitivity of 91dB, as well as a remote and wired microphone for added convenience. The manufacturer reserves the right to modify specifications without prior notice.
Product Usage Instructions
CAUTION: To avoid malfunction or shock hazard, do not expose the speaker
box to moisture or wet places. If setting up outdoors, make sure it is under
cover. Do not use or store the equipment near damp places. If the power cord
is broken, it must be replaced by the manufacturer, service agent, or
qualified personnel to avoid risks. To reduce the risk of fire or electric
shock, do not expose this equipment to rain or moisture. Clean only with a
soft, dry cloth.
CAUTION: Before using the speaker box, please charge the battery fully
for better battery life. Do not play the speaker box and charge the battery at
the same time, as it will affect battery life.
Panel Specifications
- Aux Out LED Swtich
- Aux In
- Charge Indicator
- DC12V Input Power Switch
- Master Volume Treble
- Bass Mic Volume Mic Treble Mic Bass Echo
- Mic Input 1 Mic Input 2 Power Indicator Overload Indicator Mic Switch
- Power Input
Connection Bluetooth
- To pair the speaker with a Bluetooth phone or audio device, press MODE repeatedly on the MP3 player until this mode is selected.
- Put your phone or device to be used in Bluetooth device discovery mode.
- When your phone or device shows the Bluetooth device, confirm the link.
CAUTION
- Avoid exposing the speaker box to moisture. If they are set up outdoors, Be Sure they are under cover.
- Do not use nor store the equipment near wet or dap places. It may cause a malfunction or shock hazard.
- If the power cord is broken, it must be replaced by the manufaturer or service agent or qualifield personnel to avoid risks.
- To reduce the risk of fire or electric shock, do not expose this equipament to rain or moisture.
- Clean only with a soft, dry cloth.
CAUTION : BEFORE USE SPEAKER BOX, PLEASE CHARGE BATTERY FULLY, IT IS
BETTER FOR BATTERY LIFE.
DON’T PLAY SPEAKER BOX AND CHARGE BATTERY AT THE SAME TIME, OTHERWISE IT WILL
AFFECT BATTERY LIFE.
Packing Contents
- 1 Speaker
- 1 Remote Control
- 1 User´s Manual
- 1 Power Cable
- 1 Wired Mic
Specifications
- Active speaker with rechargeable battery
- 10″ woofer
- 1.5″ KSV coil
- 850g magnet
- RMS Power: 80W
- PMPO Power: 1600W
- Tweeter: 25mm
- Sensitivity: 91dB
- Includes remote+ wired microphone
OVERVIEW
Panel Specification
-
ECHO function:
It’s located on control panel, with eco control. Sing song or talk with eco function will reach good effection. -
Treble / Bass potentiometer:
Can control the bass, treble of speaker box (line input and mp3 INPUT), also it can control microphone´s treble and bass. Play/Pause: Press to play a song or pause while playing a song. -
Previous: Press once to jump previous song/Press and hold to diminish the volume level.
-
Next: Press once tu jump to next song/ press and hold to raise the volume level. Cycle play: To select a player mode, the options are:
- One : Select this to play current song idefinitely
- All : With this option you can repeat all music Model: Select an operating modality.
Connection Bluetooth
- To pair the speaker with a bluetooth phone or audio device, press “MODE” reapeatedly on the MP3 player until select this mode.
- Put your phone or device to be used in bluetooth device discovery mode.
- When your phone or device shows the “BLUETOOTH” device, confirm the link.
The manufacturer reserves the right to modify specifications without prior notice.