moonki MO-PB280 Party Speaker User Manual
- October 30, 2023
- moonki
Table of Contents
User Manual
MO-PB280 Party Speaker
CAUTION
Avoid exposing the speaker box to moisture. lf they ore set up outdoors, Be
Sure they ore under cover.
Do not use nor store the equipment near wet or dip places. limo caused
malfunction or shock hazard.
If the power cord is broken, it must be replaced by the manufacturer or
service agent or qualified personnel to ovoid risks.
To reduce the risk of tire or electric shock, do not expose this equipment to
rain or moisture.
Clean only with o soft, dry cloth.
CAUTION: BEFORE USE SPEAKER BOX, PLEASE CHARGE BA TTERY FULL Y, IT IS
BETTER FOR BATTI : RY UFE. DON’T PLAY SPEAKER BOX AND CHARGE BATTERY AT THE
SAME TIME, OTHERWISE IT WILL AFFECT BATTERY LIFE.
Box contents
1 x Sound box
1 x remote control
1 x PS Adapter
1 x User Manual
1 x warranty card
Specifications
2Ways active speaker
RMS power: 60W
Frequency Response: 45Hz-18KHz
Signal-to-noise ratio: 90dB
impedance: 40
Woofer: 2×8″
Tweeter: 1 x 2″
Connections: Bluetooth (5.1), AUX In, Mic x2, DC In
Charging time: 2 to 4 hours approx.
TWS connectivity.
Battery: 7.4V, 3600mAh
Input: 9V-2A
Product Size: 270285610mm
Product weight: 5.9 kg
Box size: 293x303x688mm
Box weight: 6.2 kg
Safety Precautions
Disfigure in restricted areas: Switch off the device where use of the device is not permitted or where there is a risk of causing interference or danger, for example, on board an aircraft, near medical equipment, fuel!, chemicals or places of detonate. Road safety comes first: Check current laws and regulations regarding the use of this device in areas where you drive.
- MOM handle the device during conduct*.
- Concentrate fully on driving,*
- Radio signals can affect some of the car’s electronic systems, such as the stereo and alarm systems.
Interference: All wireless devices are susceptible to interference, which
could affect performance.
All our devices are* compliant with international standards and regulations
and, if necessary, national, with the aim of limiting the user’s exposure to
electromagnetic fields. These standards and regulations were adopted following
the completion of extensive scientific research. Nor has this research
established any link between use of the mobile headset and any scare adverse
effects if the device is used according to standard practices. Authorized
Personnel: Only qualified persons are authorized to install or repair this
product.
Accessories: Use only compatible batteries, chargers and other
accessories with this equipment. Do not connect incompatible products.
Children: Keep your device in a safe place, out of the reach of small
children. The device contains small pews that may present a choking hazard.
Operations
-
How to charge: Use the adapter provided with the product and plug it into the speaker and another plug into a wall outlet. When charging the speaker, the LED is red, when fully charged, the LED is green.
-
Bluetooth function: Press Power button to turn on the speaker and it will automatically enter Bluetooth pairing mode. If not, press the Mode button to switch to Bluetooth mode. The LED display will show “BLUE”. Search the Bluetooth parameter on your mobile device “BLP3963” and select it to connect.
-
TWS function: Before any manipulation,
turn off the Bluetooth function on your move! device. Connect two equal speakers (same product). When two speakers are all in bluetooth mode, long press the TWS button on one of the speakers, the display will show “E-ON”, the “BLUE” will flash, once 2 speakers connected, a prompt voice will be heard. Then activate the Bluetooth function on your mobile device and search for “BLP3963” to connect. Once connected, you can listen to music from the two speakers. -
AUX input: Connect the audio cable to an output device, it will automatically enter AUX mode, the display will show “AUX”, you can play with music then.
Top panel
1. ON/OFF | 10. LED mode: change LED color |
---|---|
2. Treble control button | 11. Microphone volume |
3. Bass control button | 12. Echo: adjust microphone echo level |
4. Master volume | 13. DELAY: Delay time microphone echo input |
5. Play / Pause / TWS (long press to skip TWS function) | 14. Microphone |
input 1
6. Next: next music.| 15. Microphone input 2
7. Previous: Previous song.| 16. Aux in: connect external device with audio
cable.
8. Mode: switch to Bluetooth/AUX mode| 17. 9V-2a input
9. TWS: Bottio TWS| 18. Charging light: When charging the speaker, the LED
is red, when fully charged, the LED is green.
Remote control
1: Power on/off | 7.Next track |
---|---|
2.Mode: switch to Bluetooth/AUX mode | 8. Play/ pause |
3.STOP: Stop working | 9. VOL-: Volume down |
4.MUTE: Silent mode | 10. TWS: TWS button |
5.VOL+: Volume up | 11. EQ: press to switch between these different sound |
equalizer modes: Vocal, Pop, Rock, Classic and Jazz
6. Previous track| 12. Bottio name (0-9) : track by selecting song number in
TF/USB mode (to select numbers 0-99, press two digits within 1-3 seconds (e.g.
1 and 0)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>