moonki MS-112DSP Portable Speaker User Manual
- October 30, 2023
- moonki
Table of Contents
Portable Speaker
User Manual
MS-112DSP Portable Speaker
CAUTION
Avoid exposing the speaker box to moisture. If they ore set up outdoors, Be
Sure they ore under cover.
Do not use nor store the equipment near wet or dip places. It Moy cause o
malfunction or shock hazard.
lf the power cord is broken, it must be replaced by the manufacturer or
service agent or qualified personnel to ovoid risks.
To reduce the risk of tire or electric shock, do not expose this equipment to
rain or moisture.
Clean only with o soft, dry cloth.
CAUTION: BEFORE USE SPEAKER BOX, PLEASE CHARGE BA TTERY FULL Y, IT IS
BETTER FOR Battled: RY UFE. DON’T PLAY SPEAKER BOX AND CHARGE BATTERY AT THE
SAME TIME, OTHERWISE IT WILL AFFECT BATTERY LIFE.
Packing Contents
1 Speaker
1 Remote Control
1User’s Manual
1 Power Cable
2 wireless microphone
Specifications
12″ 2-Way Active DSP Speaker
PMPO Power: 4500W
RMS Power: 350W
Woofer: 12″ diameter, with 3″ (75mm) KSV coil.
Tweeter: Diameter 1.73″°
Response frequency: 45HZ-18KHZ
Sensitivity: 122dB(+/-3dB)
Connectivity: Bluetooth, Line In, Line Out Includes 4 preset DSP equalization
values
Unit Measurements:
41.6 X 44 X 65.2CM (Ds W x H) Unit Weight 18.6kgs
Box Measurements:
47.5 X 39.5 X 71.5CM (Ds W x H) Box Weight 20.9kgs
Panel Specification
Play/Pause: Press to play a song or pause while playing a song.
Previous: Press once to jump previous song/Press and hold to diminish the
volume levee
Next: Press once tu jump to next song/ press and hold to raise the volume
level.
cycle play: To select a player mode, the options are:
– One: Select this to play current song indefinitely
– All: With this option you can repeat all music
Mode: Select an operating modality.
EQ Presets: DSP 4 Effects (Live-Speech-Music-flat)
Signal-Limit-Power Indicator: The power Led indicator Lights up when turn on
the power switch and light up when input signal in distorted
Line/Mic Input: One balanced XLR connector for microphone signal input. You
can use any connector. A level control can adjust the level of the input
signal.
Line/MP3 Input: One balanced XLR connector for various inputs from devices
such as Mixer. A level control can adjust the level of the input signal.
Line Out: A balanced XLR connector is provided for connecting to other
amplifiers or another powered speaker.
TWS: Using Bluetooth TWS (True wired stereo):
The speaker includes TWS function via Bluetooth.
In case you have two units of the same model at hand, switch to Bluetooth
mode. When playing for the first time, you must choose one of the speakers as
the master. Then press and hold (5 seconds) the play/pause button on the
control panel to connect with another speaker. You will hear indicator sound
on “right channel” coming out from main speaker and sound on “left channel”
from other speaker after successful pairing. Then you can start Bluetooth
operation as usual. Sound will be output from both speakers. When you turn off
or change the play mode and back to Bluetooth mode, the two speakers can
automatically pair to play in TWS mode. In TWS pairing for the first time,
there may be a short ‘ as.” sound from the speaker which is not a malfunction.
If you turn off the main speaker, TWS playback will stop.
The manufacturer reserves the right to modify specifications without prior
notice.
Connection Bluetooth
- To pair the speaker with a Bluetooth phone or audio device, press “MODE” repeatedly on the MP3 player until select this mode.
- Put your phone or device to be used in Bluetooth device discovery mode.
- When your phone or device shows the “BLUETOOTH” device, confirm the link.