moonki MW-PB265BLT Party Speaker Instruction Manual

: October 30, 2023
: moonki

moonki MW-PB265BLT Party Speaker

moonki-MW-PB265BLT-Party-Speaker-PRODUCT

Thank you for purchasing the Party Speaker MW-PB265BLT. Please read this instruction manual carefully before using the product to achieve the best performance and keep it for future reference.

Caution

Risk of electric shock, do not open the device as there are no serviceable parts for customers. Refer any maintenance or repair to qualified personnel. The sign on the device indicates the existence of dangerous voltage inside the unit, which states a risk of
electric shock. The sign also indicates that there are important instructions of operation and handling in the manual that comes with this device.

Note

This unit may be submitted for changes in specifications, characteristics, and/or operation without prior notice to the user to continue improving and developing its technology.

Important Notice Before Use This Speaker

Please read these instructions carefully and follow all warnings:

Keep the instructions for future reference
Do not use this apparatus near water
Clean only with a dry cloth
Do not block any ventilation openings
Unplug this apparatus during lightning storms or when unused for long periods of time
Refer all servicing to qualified service personnel
Servicing is required when the apparatus has been damaged in any way
Never remove the casing of this apparatus
Never lubricate any part of this apparatus
Never place this apparatus on other electrical equipment
Never look into the laser beam inside this apparatus
Make sure that you always have easy access to the power cord or adaptor to disconnect the apparatus from power
Use of controls or adjustment or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation

What’s In The Box

Speaker
Remote control
User manual
Aux In
AC Power Cable

Top Control Panel

Mute Button
MIC VOL Control
GUITAR VOL Control
MIC TONE Control
MIC ECHO Control
AUX Input jack
USB Charge
Standby Button
Mode Button
BT Button
Music Volume Control
Guitar Input jack
MIC Input jack
TWS Button
Voice+ Button

Rear Panel

Voice 0 Button
Voice- Button
MIC PRIORITY Button
BT Con
Previous Button
Play/Pause Button
BT Disc
Next Button
3D Button
Lighting Button
Bass Button
Display window
TONE Button
EQ Button
AC Power Input jack
Power ON/OFF Button

Remote Control

Power function key
BT function key
Volume+ function key
Play/Pause function key
Previous function key
Volume- function key
Search function key
Channel- function key
Bass function key
Mode function key
Mute function key
Next function key
Channel+ function key
EQ function key

Product Get Started

Connect Power

Plug the AC power cable into the AC Power Input jack. Connect the other end of the cable to a power outlet.

Prepare The Remote Control

To use the remote control, remove the plastic tab from the battery compartment. Point the remote control at the speaker and press the desired button.

Turn ON/OFF The Speaker

Press the Power ON/OFF Button on the rear panel to turn on/off the speaker.

Charging The Internal Battery

The internal battery will automatically charge when the speaker is connected to power. It is recommended to fully charge the battery before first use.

Built-in Battery Care

Do not expose the built-in battery to high temperatures or direct sunlight. Do not puncture or damage the battery. If the battery is damaged, stop using it and contact qualified service personnel.

Basic Key Play Operations

Use the Top Control Panel or Remote Control to perform basic key play operations like Play/Pause, Next, Previous, Volume control, etc. Refer to the user manual for more details.

USB Charge

The USB Charge port allows you to charge your phone or other devices while playing music.

Bluetooth

The Bluetooth feature allows you to connect your phone or other devices wirelessly to the speaker and play music.

AUX Line In

The AUX Line In jack allows you to connect external devices like MP3 players, CD players, etc. to the speaker and play music.

Wired Microphone/Guitar

The MIC Input jack and Guitar Input jack allow you to connect a wired microphone or guitar to the speaker and use it for karaoke or live performances.

Production Information

The production information includes the model number, manufacturing date, and other details about the product. Refer to the user manual for more details.

Product Troubleshooting

If you encounter any issues with the product, refer to the troubleshooting section in the user manual or contact qualified service personnel.

DEAR CUSTOMER
In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference

| CAUTION|
---|---|---
RISK OF ELECTRIC SHOCK, DO NOT OPEN
Caution: To reduce the risk of electric shock do not open this device, there are no serviceable

parts for customers. Please refer any maintenance or repair to qualified personnel.

| This sign means the existence of dangerous voltage inside the unit, which

states a risk of electric shock.

| This sign means that there are important instructions of operation and

handling in the manual that comes with this device.

NOTE
This unit may be submitted for changes in specifications, characteristi cs and/or operation without prior notice to user, in order to continue improving and developing its technology.

Important Notice

Before Use This Speaker

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all warnings.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning Storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way. Such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Battery usage CAUTION-TO prevent battery leakage which may result in bodily injury, property damage, or damage to the remote control.
- Install all batteries correctly,+ and – as marked on the remote control.
- Do not mix batteries(old and new or carbon and alkaline, etc.)
- Remove batteries when the remote control is not used for a long time.
- Batteries (battery pack or batteries excessive heat such as sunshine, fire, or the like).
Apparatus shall not be exposed to dripping or splashing.
Do not place any sources of danger on the apparatus(e.g. liquid filled objects, lighted candles ).
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Warning

Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical equipment.
Never look into the laser beam inside this apparatus.
Make sure that you always have easy access to the power cord, or adaptor to disconnect the apparatus from the power.

Caution

Use of controls or adjustment or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Your Party Speaker

What’s In The Box
Check and identify the contents of your package:

Speaker
Remote control
User manual
Aux In
AC Power Cable

Top Control Panel

Mute Button
MIC VOL Control
GUITAR VOL Control
MIC TONE Control
MIC ECHO Control
AUX Input jack
USB Charge
Standby Button
Mode Button
BT Button
Music Volume Control
Guitar Input jack
MIC Input jack
TWS Button
Voice+ Button
Voice 0 Button
Voice- Button
MIC PRIORITY Button
BT Con
Previous Button
Play/Pause Button
BT Disc
Next Button
3D Button
Lighting Button
Bass Button
Display window
TONE Button
EQ Button

Rear Panel

AC Power Input jack
Power ON/OFF Button

Remote Control

moonki-MW-PB265BLT-Party-Speaker-FIG
4

Power function key
BT function key
Volume+ function key
Play/Pause function key
Previous function key
Volume- function key
Search function key
Channel- function key
Bass function key
Mode function key
Mute function key
Next function key
Channel+ function key
EQ function key

Get Started

Caution

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on back or the underside of the unit.
Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
Before you connect the AC power cord, make sure that you have completed all other connections

Prepare The Remote Control

To insert the remote control batteries:

Open the battery compartment.
Insert 2 x AAA batteries with correct polarity (+/-) as indicated.
Close the battery compartment.

Please Note:

If you are not going to use the rem ote for a long time, remove the batteries.
Do not use old and new or different type of batteries in combination.
Batteries contain chemical substances, so they should be disposed of properly.

Turn ON/OFF The Speaker

The speaker can work with either connected AC power input (AC mode), or by build in battery
AC mode, connect the AC power cable provided to a wall socket.
The speaker will be powered by AC power and s et the power switch on rear panel to ON position.
Press the POWER button on the top pa nel or on the remote control to turn it into Standby mode, press it again to power it on.

Caution:
If you do not use this unit for a while, please switch the “POWER” button to “OFF” status, and disconnect the AC power cable of this unit.

Charging
The Internal Battery
The speaker comes with a built in rechargeable battery, follow the below steps to charge it:

Connect the power cable and plug to the wall socket on the rear panel.
There is a battery indicator light on the rear panel, there will be a red light when it is being charged.
When the battery indicator light on the rear pane turn green indicates the battery is fully charged , then unplug the power cable to stop charging

Built-in Battery Care

Your product is powered by a rechargeable bat tery.
The battery can be charged and discharged hundreds of times, but will eventually wear out.
Unplug the charger from the electrical plug and the product when not in use.
Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
If left unused, a fully charged battery will lose its charge over time.
Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime ofthe battery.
Always try to keep your device in a cool, moisture free environment that’s less than 32°C.
A product with a hot or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
The unit should be fully recharged after using the device each time. This will keep the health of the battery.
If you plan to store your device for longer than six months, charge the battery for two hours every six months to keep it fresh.

Note: please fully charge the product when it is not going to be used for a long time and charge once a month to keep longer battery life.

Basic Key Play Operations

moonki-MW-PB265BLT-Party-Speaker-FIG
6

Bluetooth

Press the M/MODE button on the Top Control panel or on the remote control to switch to the BLUETOOTH CONNECT mode, bLUE ) will be displayed on the screen.
Open the Bluetooth on the external device (must have Bluetooth function), and the name MW PB265BLT will show on the device, please try to connect it.
Once connected, you can hear a small sound from the speaker.
You can use the or key on the Top Control panel to control the track s of the external device.
Note:
This speaker do not need the password.

TWS Connecting two speakers for True Wireless Stereo sound

Optional, requires two speakers
If you have two of these speakers ( MW PB265BLT ), you can use them together for a more immersive audio experience. To pair the two speakers:

Place both speakers within Bluetooth range of each other (in the same room).
Press the Power Button to turn on each speaker and the speaker will switch to Bluetooth mode automatically.
Now short press the TWS Button on one unit,”PAIR” will shown on the display window,wait for about 3 seconds and you will hear the tone “LEFT CHANNEL,RIGHT CHANNEL” indicating that the pairing was successful.Now the main speaker shown “bLUE”,the second speaker shown”bLbL”
Search for ‘ MW PB265BLT ‘ on your device and connect
Now you can play Bluetooth audio from both speakers n stereo.

Note:

To switch back to playing audio on one speaker, press the TWS button on any one device.”PAOF” will shown on the display window.
You can short press TWS button on the main unit again to reconnect. ”PAIR” will shown on the display window, wait for about 3 seconds and you will hear the tone “LEFT CHANNEL,RIGHT CHANNEL” indicating that the pairing was successful.
If the speaker is on the BLUETOO TH(TWS) mode,when switch to AUX you can also enjoy TWS function in this mode But if you disconnect the two speakers in AUX mode, can not reconnect again unless you switch to BLUETOOTH mode to reconnect.

AUX Line In

Press the M/MODE
button on the Top Control panel or on the remote control to switch to the AUX(Line) mode, ( AUH ) will be displayed on the screen.
Connect this speaker to AUX inserting jack and the external device Earphone jack by provided AUX cable;
Once connected, turn on your external device music
Caution: Please turn off the unit before connect AUX cable in order to avoiding unexpected noise.

Wired Microphone /Guitar

Insert 6.35mm wired microphone to play with microphone.

Insert 6.35mm wired guitar to play with guitar.

When playing with the wired microphone/guitar , please p ush th ese sliders to adjust the sound v olume level of microphone /guitar Microphone:

When insert the wired microphone, push these sliders first to open the microphone volume control or echo volume control of microphone,
You can use the MIC VOL slider for volume increase or decrease of mi crophone.
You can use the MIC TONE slider for Tone increase or decrease of microphone.
You can use the ECHO slider for ECHO increase or decrease of microphone.

Guitar:

When insert the wired guitar, push the GT VOL slider first to open the gu itar volume control,
You can use the GT VOL slider for volume increase or decrease of GUITAR.

Important Notes

While using the microphone, avoid being put the microphone opposite the bass of Speaker,as they may have Whistler Noisy.
To get the best singing performance, keep the micro phone within 5 15cm of the mouth and at a 45 degree angle.
When using the microphone, always pay attention to the battery.
If the battery is low, the indicator light will come on and the performance will progressively become poor.

Caution: Please do not put the microphone directly face to the speaker, it may damage the speaker.

Product Information

Amplifier|
---|---
Output power| 100W
Input Sensitivity| ≥500mV
FM|
FM range| 87.5-108MHz
Frequency Response:| 20Hz-20KHz
Speaker|
Treble Speaker| 2 Inch2
Bass Speaker| 6.5 Inch2
General information|
Unit Dimensions| 283287620mm
AC Power| 100-240V~ 50/60HZ
Battery| Li-ion 11.1V /7500mAh

Troubleshooting

Warning

Never remove the casing of this speaker.
If you encounter problems when using this speaker, check the following points before requesting service.

No power

Ensure that the AC power plug of the speaker is c onnected properly.
Ensure that there is power at the AC outlet.

No sound or poor sound

Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wires are clamped.

No response from the speaker

Disconnect and reconnect the AC power plug, then turn on the speaker again.

Remote control does not work

Before you press any function button, first select the correct source with the remote control instead of the main unit.
Reduce the distance bet ween the remote control and the unit.
Insert the battery with its polarities(+/ signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the speaker.