moonki sound MS-P112B Two-Way Active Semi Professional Speaker User Manual

October 30, 2023
moonki sound

Monk Sound
Two-Way Active Semi Professional Speaker
User Manual

MS-P112B Two-Way Active Semi Professional Speaker

CAUTION
Avoid exposing the speaker box to moisture. If they ore set up outdoors, Be Sure they ore under cover.
Do not use nor store the equipment near wet or dip places. lit Moy cause malfunction or shock hazard.
If the power cord is broken, it must be replaced by the manufacturer or service agent or qualified personnel to ovoid risks.
To reduce the risk of tire or electric shock, do not expose this equipment to rain or moisture.
Clean only with o soft, dry cloth.
CAUTION: BEFORE USE SPEAKER BOX, PLEASE CHARGE BA TTERY FULL Y, IT IS BETTER FOR BATTI : RY UFE. DON’T PLAY SPEAKER BOX AND CHARGE BATTERY AT THE SAME TIME, OTHERWISE IT WILL AFFECT BATTERY LIFE.
Welcome to yours speaker’s instruction guide

Packing Contents

1X Speaker
1X Remote Control
IX User’s Manual
1X Power Cable
2 X UHF Wireless microphone

Specifications

112 Inch 2 Way Professional speaker box with rechargeable battery.
Max Power: 3000W
RMS Power: 150W
Woofer: 12″ Diameter, with 1.5 (38 mm) KSV voice coil
Tweeter: 1 Diameter (25 mm)
Frequency Response: 50HZ-20KHZ
Sensitivity: 95 dB(+/-3dB)
Connectivity: Bluetooth, XLR
Line In, XLR Line Out
Battery: 12V – 7000 mAh
Units Measures:
35 x 40 x 61.5cm(Pr x An x Al)
Unit Weight: 18.4KGS
Box Measures:
44.5 x 41.5 x 68.5CM (Pr x An x AI)
Box Weight: 20.8kgs

Panel Specification

Play/Pause: Press to play a song or pause while playing a song.
Previous: Press once to jump previous song/Press and hold to diminish the volume level.
Next: Press once tu jump to next song/ press and hold to raise the volume level.
cycle play: To select a player mode, the options are:
– One: Select this to play current song idefinitely
– All: With this option you can repeat all music Stops current song.
Mode: Select an operating modality.
TWS: Using Bluetooth TWS (True wired stereo): The speaker includes TWS function via Bluetooth.
In case you have two units of the same model at hand, switch to bluetooth mode. When playing for the first time, you must choose one of the speakers as the master. Then press and hold (5 seconds) the play/pause button on the control panel to connect with another speaker. You will hear indicator sound on “right channel” coming out from main speaker and sound on “left channel” from other speaker after successful pairing. Then you can start Bluetooth operation as usual. Sound will be output from both speakers. When you turn off or change the play mode and back to Bluetooth mode, the two speakers can automatically pair to play in TWS mode. In TWS pairing for the first time, there may be a short “sa sa sa … ” sound from the speaker which is not a malfunction. If you turn off the main speaker, TWS playback will stop.
Connection Bluetooth

  1. To pair the speaker with a Bluetooth phone or audio device, press “MODE” repeatedly on the MP3 player until select this mode.
  2. Put your phone or device to be used in Bluetooth device discovery mode.
  3. When your phone or device shows the “BLUETOOTH” device, confirm the link.

Wireless Microphone

1- Grille
2- Power on/off/ mute function
3- Battery Cover. Access to the battery

The manufacturer reserves the right to modify specifications without prior notice.

moonki sound MS-P112B Two-Way Active Semi Professional Speaker - Wireless
Microphone overvew

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals