ASTERA FP7-PRPINL Luna Bulb PrepInlay Kit User Manual

ASTERA FP7-PRPINL Luna Bulb PrepInlay Kit

INTRODUCTION / INTENDED USE

The PrepInlay offers space for up to eight LunaBulbs and is designed for professional use in the event and film industry. Thanks to its integrated battery, the PrepInlay can be used as an external control unit to configure the LunaBulbs inserted for different purposes: It is useful for fast adjustment of LunaBulbs for standalone operation, a quick connection of the inserted LunaBulbs with the AsteraApp or the preparation of LunaBulbs for DMX use. Its control panel is designed exactly as known from other Astera fixtures and gives you access to the most important menu settings and functions of the fixture(s) in use. Thanks to its built-in Bluetooth the PrepInlay can be used as BluetoothBridge (BTB). This device is designed for indoor use and has an IP 20 rating. Do not shake the device. Avoid brute force when installing or operating the device. When choosing the installation spot, please make sure that the device is not exposed to extreme heat or dust. Avoid direct sunlight for longer periods of time.

The specified ambient temperature must be maintained. Keep away from direct insulation (particularly in cars) and heaters. Never use the device during thunderstorms connected to the power mains. Overvoltage could destroy the device. Always disconnect the device during thunderstorms. Operate the device only after having become familiarized with its functions. Please consider that unauthorized modifications on the device are not allowed due to safety reasons! If this device is operated in any way different from what is described in this manual, the device may suffer damages and the warranty may be void. The disclaimer includes all damages, liability or injury resulting from failure to follow the instructions in this manual. Furthermore, any other operation may lead to dangers like short circuit, burns, electric shock, crash etc. This device is not for household use and is not suitable for permanent installation.

SAFETY INFORMATION

Before you operate this unit read the manual carefully. Always make sure to include the manual if you pass/ rent/ sell the unit to another user. Please use your own caution when operating. This product is for professional use only. It is not for household use.

• Do not operate the unit in areas of high temperature conditions or under direct sunlight. It can cause abnormal behavior or damage the product.
• Always follow local safety requirements.
• Only authorized personal may service the battery.
• Do not place in fire or heat.
• Do not use or charge the unit if it is damaged.
• Avoid bumping or plunging, it may cause fire or explosion.
• Never store the battery when fully drained. Always recharge immediately when empty. Please do not charge unattended.
• Make sure to fully charge all units before storing them.
• Partially charged batteries will lose capacity.
• Fully recharge every 6 months if not used.
• The battery may only be replaced with an original spare part from Astera.
• It is recommended to charge at a temperature between 15°C and 35°C.

Warning: In extreme cases, abuse or misuse of standard/ rechargeable batteries can lead to:

• Explosion
• Fire development
• Heat generation or smoke and gas development.
• Do not open the product housing.
• Do not apply power if the unit is damaged.
• Do not submerge the unit into any liquid.
• Caution, risk of electric shock.
• The PrepInlay shall be installed near a socket-outlet which must be easily accessible.
• Warning : risk of electric shock – Do not open device.
• Install only in ventilated locations.
• Do not cover the device.
• Ensure that accidental physical contact with the device is impossible.
• Allow all units to cool before touching. Allow all LunaBulbs to cool in the PrepInlay before covering.

NOTE : The PrepInlay is also available in a sturdy plastic case as PrepCase.

PRODUCT OVERVIEW

USAGE

Functions and control panel

The PrepInlay can be used as an external control unit to configure up to eight LunaBulbs. The PrepInlay has a control panel on the top for this purpose. It can also be used as a BluetoothBridge (BTB) to forward the AsteraApp signal to paired lights. All these functions can be used simultaneously.

Power connection and charging

The PrepInlay has eight slots that can supply the inserted LunaBulbs with power via the built-in battery. The PrepInlay comes with a Titan/Helios Power Supply (FP1-CHR) to charge its integrated battery. It can be easily connected to the integrated DC socket. While the power supply is connected, the display shows the charging status. Charge immediately when the battery is empty. Do not store the unit when the battery is empty. Charging time is approximately 3 hours. The PrepInlay can run on battery or with the charger connected also while the lights are paired to the AsteraApp or to any CRMX transmitter. The battery will not charge while the bulbs are on.

Switching On/Off

A new PrepInlay needs a few seconds of charge to disable its shipping mode before it can be switched on.

As long as no LunaBulb has been inserted or no slot has been selected, the display toggles between these two options:

Connect LunaBulbs with PrepInlay

To connect LunaBulbs to the PrepInlay, simply insert the bulbs into the slots. Do this by placing the LunaBulb in the relevant slot and pressing it straight down until it clicks into place. (B22 version: the bulb must be pressed down and then turned clockwise.) The status LED at the respective slot flickers until the bulb is connected. As soon as the status LED lights up continuously, the bulb can be selected.

PLEASE NOTE: The first slot must always be filled in order to have access to the bulbs.

Select buttons and status LEDs

To be able to configure LunaBulbs via the PrepInlay, they must be selected. Individual, multiple or all LunaBulbs can be selected via respective buttons. If the status LED lights up blue, the fixture in the slot is connected but not selected; if the Status LED lights up green, the bulb in the slot is selected. If the status LED is off, the slot is empty.

Status LEDs:

A single bulb can be selected or deselected using the button next to the respective slot.

All bulbs can be selected or deselected using the “SELECT ALL” button.

Integrated control panel

PLEASE NOTE: To gain access to the main menu, two things must be fulfilled. A bulb must be inserted in the first slot and at least one bulb (not necessarily the one in the first slot) must be selected. Use the menu buttons to navigate through the main menu. Settings for color adjustment and brightness/runtime are directly accessible by two symbol buttons.

The main menu offers two new menu items that simplify the DMX addressing of the inserted LunaBulbs using PrepInay: SAME DMX ADDR. and INCREM. DMX ADDR.

All selected LunaBulbs will get the same DMX address.

All selected LunaBulbs are addressed incremental according to the selected DMX footprint. However, they do not have to be arranged consecutively in the PrepInlay: Empty slots will be ignored. First slot must be filled.

Connect PrepInlay as BTB

To control your lights with the AsteraApp, first connect a Bluetooth Bridge (BTB). It forwards the AsteraApp signal to paired lights. Please power on the PrepInlay for LunaBulb. Connect the PrepInlay for LunaBulb directly from the AsteraApp main menu by following the instructions there.

PLEASE NOTE : The required Bluetooth pairing pin is shown on the display of the PrepInlay for LunaBulb if all slots are deselected, no LunaBulb is inserted and it can also be found in the Info menu.

Pair with lights

First select all LunaBulbs in the PrepInlay which you want to pair with the AsteraApp.
PLEASE NOTE : The first slot must always be filled in order to have access to the bulbs.
Press the BLUEMODE button on the PrepInlay for LunaBulb. Go to the ”Pair with Lights” dialog in the AsteraApp. Then press OK.

CLEANING AND MAINTAINING

Caution : Liquids entering the housing of the device can cause a short circuit and damage the electronics. Do not use any cleaning agents or solvents. Only clean using a soft damp cloth.

TROUBLESHOOTING

try again.
The power cable is connected but the fixture is not charging.| The battery may be fully charged.| The fixture will only commence charging when its battery has a temperature of 45° C or less. Turn the fixture off and let it cool down; once cold enough, it will start charging.

DISPOSAL

• The unit contains a lithium-ion battery.
• Don‘t throw the unit into the garbage at the end of its lifetime.
• Make sure that disposal is carried out in accordance with local ordinances and/or regulations to prevent pollution of the environment!
• The packaging is recyclable and can be disposed.

MANUFACTURER DECLARATION

Hereby, Astera LED Technology GmbH declares that the type of radio equipment PrepInlay complies with Directive 2014/53 / EU. The full text of the EU Declaration of Conformity is available at the following Internet address: https://astera-led.com/prepinlay. Astera LED Technology GmbH declares that this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC STATEMENT:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.

SPECIFICATIONS – TECHNICAL DATA

15.16″ x 10.63″ x 4.91″

All specifications provided are typical values and may be subject to change without prior notice.

ORDER CODE:  FP7-PRPINL-E26/E27

www.astera-led.com/prepinlay

Documents / Resources

| ASTERA FP7-PRPINL Luna Bulb PrepInlay Kit [pdf] User Manual
FP7-PRPINL Luna Bulb PrepInlay Kit, FP7-PRPINL, Luna Bulb PrepInlay Kit, PrepInlay Kit, Kit
---|---

References

• LED Commercial Lighting and Lighting Controls | Current - GLI Brands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>