HOFTRONIC 2710736 Triton Industrial High Bay LED Luminaires User Manual

HOFTRONIC 2710736 Triton Industrial High Bay LED Luminaires

Product Information

Specifications

Product Usage Instructions

Installation Steps

1. Ensure electrical power is OFF before starting the installation.
2. Verify that the luminaire is allowed to cool for at least 30 minutes before performing any maintenance.
3. Mount the luminaire at a distance of at least 80cm from the ceiling.

Maintenance Guidelines

• Use proper supply wiring as specified on the luminaire date sheet.
• Avoid operating the luminaire in ambient temperatures higher than indicated on the date sheet.

Warnings

• Avoid using the luminaire in environments containing specific chemicals listed in the manual.
• Make sure to use only replacement parts from Hoftronic for maintenance.

FAQ

• Q: Can this luminaire be used outdoors?
  A: The luminaire is recommended for dry locations only. For outdoor use, additional weatherproofing may be required.

• Q: What is the recommended height for installation?
  A: The recommended installation height can be found in the specifications table provided in the manual.

DIMENSION

Industrial High Bay voltage ranges:

• Nominal voltage: 220-240V
• 50/60Hz

APPLICATION

SAFETY WARNINGS

To avoid the risk of fire, explosion, or electric shock: this product should be installed, inspected, and maintained by a qualified electrician only, in accordance with all applicable electrical codes. *Verify power wire is by following per under applicable electrical codes.

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.

• To avoid electric shock:
  • Be certain electrical power is OFF before and during installation and maintenance.
  • Luminaires must be supplied by a wiring system suitable per local code with an equipment grounding conductor.
• To avoid burning hands:
  • Before to performing maintenance, ensure Luminaire is allowed to cool after powering off for a period of 30 minutes.
• To avoid product degradation:
  • Do not operate in ambient temperatures above those indicated on the luminaire date sheet.
  • Use proper supply wiring as specified on the luminaire date sheet.
  • Avoid use in environments containing sulfur, chlorine or other halides, methyl acetate or ethyl acetate, cyanoacrylates, glycol ethers, formaldehyde, or butadiene.
  • Mount luminaire no less than 80cm from the ceiling.
  • Make sure the supply voltage is within the voltage range stated on the date sheet.
  • Use only replacement parts from Hoftronic.
  • Aircraft cable mounting is recommended for dry locations only.
  • Use only Hoftronic or equivalent parts for mounting luminaire.

IMPORTANT SAFETY DETAILS

1. Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
2. This product must be installed by a qualified electrician.
3. This product may NOT be installed by minors or people with a mental disability.
4. Make sure the unit it sufficiently ventilated.
5. Never cover the unit during operation.
6. Keep out of reach of children or animals.
7. Do not look directly at the light source during operation, this can lead to serious eye damage.
8. Any other use than described in the manual may damage the product or cause danger to the user, e.g. due to a short circuit, fire or electric shock.

SPECIFICATIONS TABL

• Tightness level: IP 65
• Impact resistance: IK 09
• Operating temperature range (Ta): -30°C to + 40°C
• Operating Humidity: 10-90%RH
• Mounting Option: Loop Hanging Bracket Mounting
• Warranty: 5 years
• Power: 100W/150W/200W
• Efficacy: 175lm/W
• Power Efficiency: ≥93%
• Start Time: ≤0.2S
• Warm-up time to 60%: 0.5S
• LED Type: SMD2835
• Beam Angle: 60° / 90° / 120°
• Recommended installation height: 4m to 12m
• Color Tolerance: Ra80 ≤5
• LED colour temperature: 4000K / 6500K
• Colour rendering index (CRI): CRI>80 standard
• Upward Light Output Ratio (ULOR): 0%
• Electrical class: Class I EU
• Nominal voltage: 220-240V ︱ 50/60Hz
• Power factor (at full load): 0.9
• Input Current: 0.5A
• Inrush Current I peak (230V): 53A
• Surge protection options (kV):
  • 4KV-Line-Line
  • 4 KV-Line-Earth
• Electromagnetic compatibility (EMC): EN 55015:2019/A11:2020, EN 61000 3-2:2019, EN 61000-3-3:2013, EN 61547:2009, EN 62493:2015
• Control protocol(s): 1-10V
• Total Harmonic Distortion(THD): IEC 61000-3-2 Class C <20%
• Driver Type: Constant current(CC)

INSTALLATION INSTRUCTIONS

MOUNTING

PENDANT EYEBOLT MOUNTING

1. STEP 1
   Thread the enclosed eyebolt hook into the top of the luminaire housing, and tighten securely. Tighten the set screw to prevent the eyebolt from loosening.

2. STEP 2
   Use a chain, cable, mounting hook, or other mounting hardware to suspend the luminaire. Make sure the mounting hardware is securely attached to a stationary structure and strong enough to safely be attached to a stationary structure and strong enough to safely suspend the luminaire.

3. STEP 3
   Refer to the Wiring Diagram to make electrical connections.

CEILING MOUNTING:

• STEP 1
  Punch M10 screw holes in the ceiling according to the bracket holes (as shown in Figure 6).

• STEP 2
  Align the bracket with the screw hole, tighten the screw and fix the bracket.

• STEP 3
  Align the hole at the top of the lamp with the bottom of the bracket, and tighten the screws to fix the lamp.

• STEP 4
  Tighten the screws at this position to complete the installation.

• STEP 5
  Unscrew the screw and adjust the lamp angle according to your needs Degree.

• STEP 6

OPTIONAL ACCESSORIES

• 60° Lens for Triton LED High Bay 100W 2713744

• 60° Lens for Triton LED High Bay 150W 2704025

• 60° Lens for Triton LED High Bay 200W 2704032

• 90° Lens for Triton LED High Bay 100W 2713751

• 90° Lens for Triton LED High Bay 150W 2704056

• 90° Lens for Triton LED High Bay 200W 2704063

• 75° ALU Diffuser for Triton LED High Bay 100W 2713768
  75° ALU Diffuser for Triton LED High Bay 150W 2704117
  75° ALU Diffuser for Triton LED High Bay 200W 2704124

• 90° PC Diffuser for Triton LED High Bay 100W 2713775
  90° PC Diffuser for Triton LED High Bay 150W 2704087
  90° PC Diffuser for Triton LED High Bay 200W 2704094

• Bracket for Triton LED High Bay for 100W 2713782
  Bracket for Triton LED High Bay for 150W 2713799
  Bracket for Triton LED High Bay for 200W 2713805

• 1,2m chain stainless steel 2704179

• Chain link stainless steel 2704186

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. The product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network that meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS
The product can be used indoors and outdoors.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. The product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with a damaged protective cover. Product must not be used in unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Nondemountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended. This labeling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labeled in this way must not be disposed of in the same way as other waste under the threat of a These products may be harmful to the natural environment and health, and require a special form of recycling/neutralizing. Products labeled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when a new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fires burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

DECLARATION OF CONFORMITY

DOCUMENTATION
This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale.
Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.

CE DECLARATION
The product complies with the following directives:
LVD: 2014/35EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.

Subject to changes without notice and errors. Please ensure that you always use the latest version. ©2023 HOF Trading B.V. | Fahrenheitstraat 11, 6003 DC Weert | The Netherlands. All rights reserved

Imported by
HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands
Made in P.R.C.
www.hoftronic.com

WWW.HOFTRONIC.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>