PCE S800 LED Headlamp User Manual

PCE S800 LED Headlamp

Product Information

• Product Name: LED Stirnlampe S800 2.000mAh USB-C
• Part Number: 720800
• Languages: DE | EN | FR | ES | PT | SV | IT | NL | DK | FI | NO
• LED Specifications:
  • 1: SMD-LED low (Spot)
  • 2: SMD-LED high (Spot)
  • 3: COB-LED low (Wide)
  • 4: COB-LED high (Wide)
  • 5: SMD+COB-LED high
  • 6: COB-LED red
• Power Output: COB-LED 5W, SMD-LED 5W, SMD-LED 5W COB-LED 5W
• Color Rendering Index (Ra): >70
• Color Temperature: ~5500 – 7500 K
• Luminous Flux:
  • 1: 500 lm
  • 2: 200 lm
  • 3: 500 lm
  • 4: 200 lm
  • 5: 800 lm
  • 6: 5 lm
• Luminous Intensity:
  • 1: 4700 lx
  • 2: 2000 lx
  • 3: 480 lx
  • 4: 200 lx
  • 5: 4600 lx
  • 6: 7 lx
• Battery Life:
  • 1: 3 h
  • 2: 8 h
  • 3: 3 h
  • 4: 8 h
  • 5: 2 h
  • 6: 30 h
• Beam Distance:
  • 1: 69 m
  • 2: 45 m
  • 3: 22 m
  • 4: 14 m
  • 5: 74 m
  • 6: 2 m
• Lifespan: 10,000 h
• Dimensions: 87 x 34 x 48 mm
• Weight: 125 g
• Battery Type: Li-Ion 3.7 V
• Charging Type: USB-C
• Charging Time: 3 h
• Battery Capacity: 2,000 mAh | 7.4 Wh
• Input Voltage: 5.0V DC 1.2 A
• Water Resistance: IPX6
• Impact Resistance: IK07
• Protection Class: III
• Materials: ALU + TPE + PC

Product Usage Instructions

1. Identify the desired lighting mode using the numbered buttons on the product:
   • 1: SMD-LED low (Spot)
   • 2: SMD-LED high (Spot)
   • 3: COB-LED low (Wide)
   • 4: COB-LED high (Wide)
   • 5: SMD+COB-LED high
   • 6: COB-LED red
2. To turn on the selected lighting mode, press the corresponding button.
3. To charge the product, follow these steps:
   • Ensure that the charging environment is closed, dry, and spacious.
   • Connect the USB-C charging cable to the USB charging port on the product.
   • Connect the other end of the charging cable to a power source with an input voltage of 5.0V DC and current of 1.2 A.
   • Allow the product to charge for approximately 3 hours.
   • Note: Do not use the product while it is being charged.
4. To maximize battery life, it is recommended to periodically charge the product (at least 3 times per year during storage) to prevent deep-discharging of the rechargeable battery pack:
   • Remove the sealing cap from the charge socket on theproduct.
   • Insert the charge plug into the charge socket.
   • Connect the charging cable to the USB charging port on the product.
5. For safety purposes, do not throw or drop the product. If the LED cover or the product itself is damaged, it must be disposed of properly.
6. Avoid using the product in rainy or damp conditions to prevent the risk of fire and explosion.
7. Keep the product away from combustible materials to avoid fire hazards.
8. Ensure that the product is disconnected from the power source by pulling the plug or removing it from the connector compartment. Do not pull the cable to disconnect.
9. Refer to the user manual for additional safety information and explanations of the symbols used.

Note: The above instructions are provided as a general guide. Please refer to the user manual for detailed instructions specific to your product model.

Specification

DESCRIPTION SYMBOLS

• Class 3 equipment
• Indoor use only
• Conforms to the European directive
• Risk-Group – Do not look into the lamp
• Waste of Electrical and Electronic Equipment (WEEE-Guideline)
• Battery disposal information – Not for household waste
• Read the operating instructions carefully before use!
• Minimum distance from lighted objects
• Safety glass is not replaceable, if the glass is damaged, the product must be discarded.“
• IP-Protection class

SAFETY – EXPLANATION OF NOTES

Please take note of the following symbols and words used in the operating instructions, on the product and on the packaging:

• Information | Useful additional information about the product
• Note | The note warns you of possible damage of all kinds
• Caution | Attention – Hazard can lead to injuries
• Warning | Attention – Danger! May result in serious injury or death

PROPER INTENDED USE

The product serves as a mobile light source and is not intended for use in other applications. The product is intended exclusively for private, household use and is not suitable for commercial use or for household room lighting and is only for use as described in the operating instructions. Use outside that stipulated in the information is improper use and this can result in damage to property or personal injury. We accept no liability for damage caused by incorrect or improper use.

GENERAL SAFETY INSTRUCTIONS

This product may be used by children from the age of 8 and by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge if they have been instructed on the safe use of the product and are aware of the hazards. Children are not permitted to play with the product. Children are not permitted to carry out cleaning or care without supervision. Keep the product and the packaging away from children. This product is not a toy. Children should be supervised in order to ensure that they do not play with the product or packaging. Avoid eye injuries – Never look directly into the beam of light or shine it into other people‘s faces.If this occurs for too long, the blue light portion of the beam can cause retinal damage. Never touch a device that is connected to the mains with wet hands, or if it has fallen into water. In this case, first switch off the house circuit breaker and then pull out the mains plug. Do not expose to potentially explosive environments where there are flammable liquids, bags of dust or gases. Never submerge the product in water or other liquids. Use only an easily accessible mains socket so that the product can be quickly disconnected from the mains in the event of a fault. All illuminated objects must be at least 10cm away from the lamp.Use the product exclusively with the accessories included with it. Never try to open, crush or heat a standard/rechargeable battery or set it on fire. Do not throw into a fire.

• The product may only be charged in closed, dry and spacious rooms, away from combustible materials and liquids. Disregarding can result in burns and fires.

Leaking battery fluid can cause irritation if it comes into contact with the skin. Immediately rinse affected areas with fresh water and then seek medical attention. Do not short-circuit connection terminals or batteries.

DANGER OF FIRE AND EXPLOSION

• Do not use while still in the packaging.
• Do not cover the product – risk of fire.
• Never expose the product to extreme conditions, such as extreme heat/cold etc.
• Do not use in the rain or in damp areas.

GENERAL INFORMATION

• Do not throw or drop
• The LED cover cannot be replaced. If the cover is damaged, the product must be disposed of.
• The LED light source cannot be replaced. If the LED has reached the end of its service life, the complete lamp must be replaced.
• Do not open or modify the product! Repair work shall only be carried out by the manufacturer or by a service technician appointed by the manufacturer or by a similarly qualified person.
• Disconnect the device from the power supply only by pulling on the plug or plug housing, never on the cable.
• Information for the light and mains adapter as well as mains voltage on the socket must match with the type plate.
• The lamp shall not be placed face-down or allowed to topple face-down.

RECHARGEABLE BATTERY PACK

The product contains a non-replaceable, rechargeable battery pack. If the rechargeable battery pack is empty, recharge it immediately.
Once fully charged, remove from the charger. In the event of liquid leaking from the power source, remove this with protective gloves and a dry cloth.

Charge the lamp on a fireproof surface and only under the constant supervision of an adult!

ENVIRONMENTAL INFORMATION | DISPOSAL

Dispose of packaging after sorting by material type. Cardboard and cardboard to the waste paper, film to the recycling collection. Dispose of the unusable product in accordance with legal provisions. The „waste bin“ symbol indicates that, in the EU, it is not permitted to dispose of electrical equipment in household waste. For disposal, pass the product on to a specialist disposal point for old equipment, use the return and collection systems in your area or contact the dealer from whom you purchased the product. Batteries and rechargeable batteries contained in electrical appliances must be disposed of separately whenever possible. Always dispose of used batteries & rechargeable batteries (only when discharged) in accordance with the local regulations and requirements. Improper disposal may result in toxic ingredients being released into the environment, which may have adverse health effects on humans, animals, and plants.In this way, you will fulfill your legal obligations and contribute to environmental protection.

PRODUCT DESCRIPTION

1. COB-LED
2. SMD LED
3. Sensor active LED
4. Sensor
5. Sensor button
6. Functions button
7. USB charge socket with rubber cover + Status LED display
8. Swivel mount

FIRST USE

Charge the rechargeable battery pack fully before first use.
Press functions button:

•  1x SMD-LED low (spot)
• 2x SMD-LED high (spot)
• 3x COB-LED low (wide)
• 4x COB-LED high (wide)
• 5x COB-LED red
• 6x SMD+COB-LED high

Dimming function:
Possible in all modes by pressing and holding the on/off button
Hand gesture sensor:
Pressing the button in the respective mode activates the automatic gesture sensor.
The light can now be switched on/ off by making a hand gesture twice.

Memory function:
If a mode is active for more than 4 seconds, the same mode will be activated again the next time the device is switched on.

LED display:

• Battery capacity:
• ≥ 30 %: LED green
• < 30 %: LED red
• < 5 %: LED flashes red + main LED flashes quickly 3x
• 0 %: Main LED flashes quickly 3x and then goes out
• During charging: LED red | Rechargeable battery full: LED green

Charging:

• Likewise, when storing over an extended period of time, charge beforehand (and at least 3x per year during storage) in order to prevent the rechargeable battery pack from deep-discharging.
• To do so, pull the sealing cap out of the charge socket and plug in the charge plug. Then connect the charging cable to the USB charging port.
• Charge only when switched off. Do not charge and use the light at the same time!

The product complies with the requirements of the EU directives

Subject to technical changes. We assume no liability for printing errors.

Customer service:

• PC ELECTRIC GmbH
• Diesseits 145
• 4973 St. Martin im Innkreis, Austria
• www.pcelectric.at.
• MA-720800/V00/02-2023

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>