TOSHIBA Y200H Lifestyle Hong Kong Instruction Manual

TOSHIBA Y200H Lifestyle Hong Kong

Safety Precautions

• Thank you for choosing the Toshiba Compressor Dehumidifier.
• Please read this Instruction Manual carefully before using the Dehumidifier to ensure proper operation.
• This Manual contains instructions that is essential to the operation of the Dehumidifier, please retain it for future reference.

Compressor Type Dehumidifier differs from air-conditioner that it does not have a cooler function. On the contrary, the room temperature may rise as the Unit produces heat during operation.

To prevent injury to user or others and damage to property, please carefully read and observe the following precautions presented in signs and symbols.

WARNING
To prevent fire, electric shock or injury Stop using the Dehumidifier immediately if abnormality or malfunction takes place. Abnormal operation of the Dehumidifier may result in fire, electric shock or injury Observation the Unit should be switched off and unplugged immediately, then contact Toshiba Repairing Service & Parts Centre for check-up and repair.

Examples of abnormality

• Short circuit
• Foreign objects or liquid inserted
• Water leaks from the Unit
• Power cord and plug overheated or power cord damaged
• Unusual loud operating noise
• Function keys not working
• Burning smells from normal operation

Do not disassemble, repair or modify the Dehumidifier as this may cause fire, electric shock or injury. Please contact Toshiba Repairing Service & Parts Centre for repair. Do not put the Dehumidifier near heat-generating devices, such as heater, as they may melt the plastic parts of the Unit that causing fire.

Operating Instruction

• Do not place or apply spray near the Dehumidifier, which may cause fire or explosion.
• Do not insert any foreign objects into the swing Louver, Air Intake or Air Outlet, which may result in injury when the internal fan is running at high speed.
• Do not damage or modify the power cord. Power cords that are damaged, modified, trapped under heavy objects, heated up or stretched may cause fire or electric shock.
• Do not use damaged power cord, which may result in short circuit, fire or electric shock. Please consult your dealer or Toshiba Repairing Service & Parts Centre.
• Do not remove the power plug by pulling the power cord as this may damage the power cord and cause short circuit, fire or electric shock.
• Do not move and store the Dehumidifier by pulling the power cord as this may cause short circuit or damage the wiring of the power cord, and result in fire or electric shock.

Power supply, power plug, and power cord
The following rules must be strictly observed, or it may cause electric shock and fire.

• Exclusively use 220V AC power sockets
• Do not use an extension cord
• Ensure that the plug is fully inserted into the socket
• Dust off and clean the power plug regularly

Do not operate the Dehumidifier in the following abnormal situations
It may result in electric shock, fire, heat generation, short circuit,ignition, and malfunction etc.

• Do not operate the Unit with damaged power plug or power cord and loose power socket.
• Do not damage, bend, stretch, twist, press, modify, and heat up the power cord, or get it caught under the Casters or doors.
• Do not disconnect the power supply until the unit comes to a complete stop. Do not drag the power cord when the unit is operating.
• Do not plug in or unplug the Dehumidifier with wet hand. Doing so could result in electric shock.

Set up environment
Do not operate the Dehumidifier in the following abnormal situations

• Place and use the Dehumidifier on a stable and leveled surface with a slope less than 2°.
• An unleveled surface will cause excess operating noise or vibration, or leave the Unit in a tilted position that the water in the tank may overflow and wet the floor and surrounding objects, which in turn result in electric shock, electric leakage and fire.
• Do not place any objects on or close to the Dehumidifier, it may result in heat generation,fire and malfunction.

Do not install the Dehumidifier
in the following setting

• A place where it is likely to come into contact with water such as bathroom. This could cause electric shock, electric leakage and fire.
• Where the unit may be subject to oil or flammable gas leakage. The flammable gas around the Dehumidifier could cause fire or explosion. Elevated position such as on a table, as the Dehumidifier may drop and cause damage to the Unit.
• Where the ambient temperature of the Dehumidifier and drain hose is below freezing point. Water inside the drain hose may freeze, that maywet the surrounding objects when it thaws, and result in electric shock, electric leakage or fire.
• The Water Tank may consequently break and leak. Where drugs and chemicals are used, such as hospital, factory, laboratory and beauty salon.
• Chemicals in the air may affect the performanceof the Unit, cause leakage, heat generation, ignition and fire.
• Outdoor location where the Dehumidifier is exposed to direct sunlight or rain that may result in leakage, heat generation, ignition and fire.
• This Dehumidifier is for indoor use only. Where space is narrow and enclosed that may cause heat generation or fire.
• Do not use combustion appliances in the path of the airflow of the Dehumidifier, as this may cause incomplete combustion.

Power plug and power cord

• Do not remove the power plug by pulling the power cord, but by grabbing hold of the plug, as mishandling may cause result in fire caused by electric shock and short circuit.
• Unplug the Unit from the power source when not using it for an extended period of time. Insufficient insulation may cause electric shock, electric leakage and fire.

Do not use the Unit for the following purposes

• Food, pharmaceuticals, artworks, data storage, and special purpose. Doing so may deteriorate the quality of the items stored.
• Water from the Dehumidifier is not suitable for human or animal consumption as it is hazardous to health.
• This Dehumidifier should be kept away from infant,children, elderly person or anyone who cannot operate the Unit independently.
• Pointing airflow from the Unit directly at a body for a prolonged period of time may be harmful to health and cause dehydration.

Maintenance

• Unplug only after the unit comes to a complete stop. Otherwise, the plug may be damaged and cause electric shock.
• After running the Dehumidifier for a long period of time, Air Intake and Drainage Hose should be taken down to clean regularly.
• Otherwise, overheating or leakage may occur. Please check for leakage underneath the Unit after using the Unit in the same spot for a long period of time.
• Leakage will wet the floor and ruin surrounding items.
• Do not wash the Dehumidifier with water This may cause electric leakage and electric shoc

Operating the Dehumidifier

• Check the Drainage Hose during the Continuous
• Drainage Operation. Wetting furniture may result in electric shock, electric leakage, and fire. Check to ensure the drain hose is free of bent and properly inserted.
• Do not put objects filled with water, such as vase, on the Unit.This may cause electric shock, electric leakage and fire.
• Do not tilt or drop the Dehumidifier or it may result in damage, leakage, electric shock and malfunction.
• Do not remove the Float from the Water Tank. This may cause intermittent operation of the Unit, leakage that wet the surrounding items, electric shock and electric leakage.
• Do not block the Air Intake and Air Outlet.
• Do not cover the Air Intake and Outlet with laundry. This may cause heat generation, fire, and damage to the clothing.
• Do not point the airflow directly at plants.
• Do not use pesticide spray or volatile thinner to wipe the body of the Unit. This may cause damage to the Unit and leakage that wet the property, or short circuit that result in fire or electric shock.
• Please do not sit or climb on top of the machine, it may Injury caused by slipping or falling.

Moving the Unit and Storage

• Before moving the unit, always switch it off, unplug and remove water from the Water Tank, and firmly hold the Handle to lift it. Mishandling may wet the surrounding items, electric shock, electric leakage and fire.
• Stop pushing forward if the Casters are unable to roll smoothly.This may cause damage to the flooring or carpet.
• Do not move or store the unit in a horizontal position This may cause damage, electric leakage, electric shock, malfunction and abnormal noises.

Product Specifications:

• Model Numbers: RAD-Y200H, RAD-Y250H, RAD-Y300H
• Power: 220V
• Swing Function: Yes
• Timer: Yes
• Fan Speed Settings: 3 levels
• Humidity Control: Yes
• Operating Humidity Range: 30% – 80%

Product Usage Instructions:

1. Ensure the device is plugged into a 220V power source.
2. Set the desired swing function using the control labelled “SWING”.
3. Adjust the timer settings as needed by using the “TIMER” control.
4. Select one of the three fan speed levels using the “FAN SPEED” control.
5. Control the humidity levels by adjusting the setting on the “HUMIDITY” control.
6. Turn the device on/off using the “POWER” button.

Component Parts

FRONT

REAR

Water Tank
Do not remove the Float from the Water Tank, or otherwise the Dehumidifier cannot detect the water level which may cause leakage and malfunction.

Installation setting
Keep enough space around the Dehumidifier to ensure effective operation. Please place the Unit according to the specifications shown in the diagram to the right. Insufficient space may impact on the pe rformance of the Dehumidifier

• Drain the Water Tank before use
• Minimise the frequency of opening and closing doors and windows to save energy.
• Keep enough space around the Dehumidifier. Allow at least 50cm of air space above the Unit and at least 20 cm on four sides, as shown in the diagram.
• Operating noise: It is recommended to place the Dehumidifier on top of a mat or rubber slab to reduce vibration and noise, which may also prevent creating carpet depression or dents on wood flooring

Control panel

Key Function

1. Functional Key: Internal drying function of the body;Negative ion function;
2. Swing key: Swing function of louver;
3. Sleep key: Sleep key: Sleep mode;
4. Timer key: Timing setup;
5. Fan speed key: Fan speed adjustment;
6. Power key: Turn on/off the machine;
7. Humidity adjustment key: Humidity set between 30% and 80% in circle;
8. Mode key: Dehumidifying and dry cloth function.

Display icon

1. Negative ion icon: the icon indicate for the operation of anion function, long press the negative ion button for 3 seconds, the icon will display.
2. Full water tank icon: this icon will be displayed when the water tank is full.
3. Drying icon inside the machine: this icon indicating the operation of drying function inside the machine, press the negative ion key to activate the function.
4. Child lock icon: this icon indicating the on/off of child lock function, long press the mode button for 3 seconds to display the icon;
5. Mode icon: these icons are indicate the operating mode correspondingly, the left icon is the laundry mode icon; the right icon is the auto mode icon
6. Fan speed icon: these icons indicate the operating fan speed; the upper icon is the high fan speed option; the lower icon is the low fan speed option;
7. Digital display: indicating the ambient humidity of standby and operating status respectively; setting the humidity level in auto mode; timer setting in timing mode.

Function Options

• Please refer to P11-13 (How to Operate) for detailed instruction.

Caution
During normal operation, the Dehumidifier may make different operating noises and heat up the bottom of the Unit.

• The Unit makes a cracking popping noise from the cooling system at the back when it starts operating but it quiets down after warm-up.
• The Unit makes a buzzing noise when the compressor (placed at the bottom of the Unit) turns on.
• The bottom part of the Unit heats up as a result of the operation of the compressor.

Internal Dry Operation
The Internal Dry Operation can dry the inside of the Unit to suppress mildew growth. This function can be activated by pressing the Internal Dry Operation function key, and deactivated by pressing the same function key again.

Drying Laundry

Proper use of the Laundry Drying Mode

• Hang and space the laundry evenly Pointing airflow from the Unit directly at the laundry and spacing the laundry evenly could shorten the laundry
• Position of the Dehumidifier Shifting the position of the Dehumidifier and the laundry to shorten the drying time.
• Sort the laundry according to fabric type and thickness and position the laundry accordingly.
  • Heavyweight clothing takes a long time to dry so it should face the Air Outlet directly.
  • Denim jeans and dress takes a short time to dry that it could be placed further away from the Unit.
  • Lightweight clothing takes a short time to dry that it could be placed further away from the Unit.
• Take down the laundry as soon as it is dry On humid or rainy days, laundry should be taken down as soon as it is dry, or otherwise it will absorb moisture from the air.

Tips

• The drying time will be longer in the following situations:
  • The laundry is in high volume
  • The laundry is heavy weight cloth
  • The room for drying laundry is big
  • The room temperature is low
  • Insufficient space between the laundry

Preparation and Confirmation

Water Tank Insertion
The Unit cannot operate if the Water Tank is not properly inserted or when it is full of water.

Taking out the Tank
Put your hand into the clasp above the side tank, and gently remove the tank.

Inserting the Tank

1. Put the water tank cover on,and rotate the water tank handle down.
2. Gently put the water tank back to the correct position, and then restart the dehumidifier

Please tidy the handle of the water tank and gently put the water tank back in place.

Caution

• Confirm that the water tank cover and water tank drain are installed, otherwise water may leak.
• When the water tank is full, please empty the water in the tank.

Filter installation method
Install the 3-in-1 Multi function filter onto the filter frame, so that the intake air can be purified.

• Remove the filter frame behind the fuselage.
• Install the 3-in-1 Multi function filter into the filter frame.
• Put the filter frame back into the machine.

Note: The dehumidification performance will be decreased after adding the filter. You can remove the 3-in-1 Multifunction filter during dehumidification to achieve the best dehumidification result.

How to Operate

Warning
Power cords cannot be damaged, bent, stretched, tied up or trapped under heavy objects, got caught under the casters or doors, modified, or heated up. It may result in electric shock, fire, heat generation, short circuit and ignition.

1. Plug-In
   • The alarm beeps once.
2. Power Switch
   • Press the switch to turn on or off the Dehumidifier.
3. Modes of Operation
   • Choose between Automatic Mode and Laundry Drying Mode when turning on the Dehumidifier. The corresponding indicator of the Mode chosen will illuminate.
   • The Child Lock function can be activated and deactivated by pressing and holding the switch for 3 seconds.
4. Humidity Selector
   • The humidity level can be set in Automatic Mode, with increment or decrement by 5% between 30-80%.
5. Fan Speed
   • Fan Speed can be adjusted in both Automatic Mode and Laundry Drying Mode between High airflow mode and Low airflow mode.
6. Swing
   • Press this button to turn on/off the swing function.
7. Function
   • Press Function button to activate the internal dry function.
   • Press Function button and hold for 3 seconds to activate Negative lons Operation.
   • Press Function button and hold for 3 seconds to deactivate Negative lons Operation.
8. Sleep
   • Press and hold this button for 3 seconds to turn on/off the display.
9. Timer
   • Press Timer button to set up Timer for switching the Unit on and off at specific times, withina 24 hour period.
   • The Unit can be set to turn on and off at specific times during the operation of the unit.
   • The Unit can be set to turn on at specific time when it is not operating.
   • Timer setting can be cancelled by pressing the Timer button when asked to confirm the Timer setting. The On and Off Timer can be set within a 24 hour period, with 1 hour as the unit of time.

How to Operate

How to empty the Water Tank
Moisture in the air is condensed and drops into the Water Tank.

• When the Water Tank is full, the Dehumidifier stops operating, illuminates the ‘Full’ indicator and beeps to alert.

1. Pull out the Water Tank slowly to prevent splash.
2. Tank to it a stile of the Water
3. Grab the Handle of the Water Tank to lift it slowly.
4. Tilt the Water Tank to slowly release the water.
5. Insert the Water Tank back into the Unit.

Caution
Pulling out the Water Tank

• Alarm set off
• Water residual around the

Drainage Outlet may drip down that have to be wiped away.

Moving the Dehumidifier

Caution
Stop moving the Unit when the Casters are stuck by flooring or carpet, and go sideways.

• Lift the Unit up to go over bumpy areas and where the casters get stuck easily.

1. Switch off the Unit, unplug it and remove water from the Water Tank.
2. Coil up the power cord and transport the Unit by grasping the Handle firmly.
   • Be cautious to keep the power cord from getting caught in the casters. Lift the Unit up by holding the Handle firmly to go over stairs or change direction of movement.

Tips

• Placing the Dehumidifier in the same spot for a long period of time may leave depression on carpet or dents on wood flooring.

Continuous Drainage

Caution

• A hose has to be properly installed for Continuous Drainage operation, or it may result in dampening the surrounding objects, electric shock, electric leakage or fire.
  • Check to make sure the hose is free of bends, and is not placed hole-side up
• Do not drain water continuously if the ambient temperature of the Dehumidifier and drain hose is below 0°C. Water inside the Unit and hose may freeze that may wet the surrounding objects when it thaws, and result in electric shock, Prohibited electric leakage and fire. Water Tank may consequently break and leak.

If a drain is available, the Dehumidifier can continuously drain water by installing a hose. This would enable the Unit to operate for a long period of time without the need to empty the Water Tank.

Specification of the drain hose
(Plastic hose readily available in the market)

Length: The length of the drain hose is suggested to be under 0.6 m. The end of the hose is placed below the Drainage Outlet by a minimum of 10 cm. Keep the hose free from clog to ensure proper drainage.
Internal Diameter: The internal and external diameters of the hose are 9 mm and 13 mm respectively. Stop the Dehumidifier before taking the following steps, and unplug it from the power socket.

Stop the Dehumidifier before taking the following steps, and unplug it from the power socket.

Caution

• Do not use an expandable hose, as the hose may not be drained completely.

1. Remove the Lid and valve of the Drainage Outlet from the back of the Unit, and insert the 9 mm hose onto the Drainage Outlet.
2. Remove the Lid and valve of the Drainage Outlet from the back of the Unit, and insert the screw-type garden tube onto the screw-type Drainage Outlet.

Caution
This Dehumidifier can continuously drain water by attaching a drain hose (with an internal diameter of 9 mm) onto the Drainage Outlet, saving the trouble of emptying the Water Tank. It is also possible to attach a screw type garden tube of an external diameter of 1 1/16 inch (1.0625 inch or 26.98 cm) and a screw pitch of 11.5 TPI.

Maintenance Tips

Warning

• No Wet Hand
  • Do not plug in or unplug the Dehumidifier with a wet hand
  • Doing so could result in an electric shock.

Caution****

• Unplugging

  • Turn off the Unit and unplug the power cord before cleaning it to prevent electric shock.

• Prohibited

  • Do not remove the Float from the Water Tank.
  • Doing so could result in inoperability, leakage, dampening surrounding objects, electric shock, and electric leakage.

Main Body

Use soft and slightly damp cloth to wipe the Unit.

• Wipe dust off the Power Plug regularly.
• Remove stubborn dirt with soft cloth and neutral kitchen detergent.
• Clean Control Panel only with a dry cloth, and use no water.
• Do not use gasoline, thinners, alcohol, cleansing powder, or brush to prevent deforming or scratching the Unit.

Water Tank

1. Pull out the Water Tank from the Unit.
2. Remove the Water Tank Lid.
   • Lift the Lid to open.
3. Clean the interior and the Lid of the Tank.
   • Do not brush the Tank to prevent scratches.
4. Wipe dry the exterior of the Water Tank, put the Lid back on and insert the Water Tank into the Unit.Press down the Water Tank Handle and
   • Lid to ensure proper installation.
5. Insert the Water Tank back into the Unit.
   • Hold the Water Tank horizontally and push it inside gently to install the Tank.

Maintenance notes
3-in-1 Multi function filter (once every 2 weeks)

1. The dirt of the filter can be cleaned by a vacuum cleaner

2. Slow down the suction power of the vacuum cleaner.

3. Remove the filter frame and take out the 3-in-1 Multifunction filter

4. Use a vacuum cleaner to clean up the dust on the 3- in-1 Multifunction filter and then wash it with water.

5. Wipe dry water with a towel and dry it in a well-ventilated place.

6. Install after fully drying.
   Prohibited items for 3-in-1 Multifunction filter:

7. Do not use water other than tap water for dry cleaning

8. Do not rub the filter

9. Can not be heated and dried

10. Don’t dry it under direct sunlight

11. Do not apply physical pressure when dry
    Product Model| Filter
    ---|---
    Item No
    RAD-Y200H、RAD- Y250H、 RAD-Y300H| 41226233

Operation and Performance

• Dehumidifying capacity

  • Dehumidifying capacity (Operation at High Fan Speed)
    Operating the Dehumidifier under the conditions set out below, the dehumidifying capacity is the amountof moisture removed per day (24 hours): High Fan Speed Operation at a room temperature of 26.7°C, indoor humidity of 60%, with no preset humidity level, and the Louver fully open. Operating with other settings and different Louver swing angle would diminish the dehumidifying capacity.

• The correlation among room temperature, humidity and dehumidifying capacity

  • Dehumidifying capacity at constant room temperature The amount of dehumidifying increases with increasing humidity level and vice versa. Eg. Humidity level at 60%.
  • When the Unit operates at the preset Humidity Level,it stops Dehumidifying The fan stops running. The amount of moisture removed may be small in such a situation but this is not a malfunction.
  • When the machine is below the set humidity and the operation mode is [Set Humidity], it will automatically stop the dehumidification operation and the fan will stop running. Although the dehumidification volume will decrease at this time, it is not abnormal.

How does a dehumidifier work?

1. The Unit draws moist air from the environment and cools it with evaporator.
2. As moist air passes through the evaporator coils, moisture freezes and transforms into water droplet that drips down into the Water Tank.

Indoor air passes through the evaporator coils and condenses on the cold coil into water droplets.

Defrost cycle during operation

• When the room temperature drops below 16°C, the Dehumidifier may frost. The Defrosting cycle will be activated during Dehumidifying Operation every 38 minutes (takes about 8 minutes) by switching to Fan Operation, to ensure proper operation of the Unit.
• Display indicates “P1” during Defrosting Operation.
• Do not unplug the power cord to force abort the Defrosting Operation.

Rise of room temperature during operation

• The Dehumidifier does not have a cooler function.
• The Unit generates heat during operation that the room temperature may rise by 1°C -4°C.

Operating noise

• Do not unplug the power cord to force abort the Defrosting Operation.
• The noise of the movement of the refrigerant is rather loud at start-up but it quiets down after warm-up.

Troubleshooting

Please check the following items of the Dehumidifier before calling for service.

Symptoms and remedies

1. The remedies that could resolve the symptoms listed below.
   Symptom| Possible Cause| Remedy
   ---|---|---

   ---

The Unit does not operate

| ****

Is the power cord properly inserted?

| Plug the power cord fully into the power socket.
Is the Water Tank full?

(Water Tank is full of water or it is not properly inserted)

| Empty the Water Tank and insert it back into the Unit.
Is the ambient temperature too low or too high?| It is recommended to operate the Dehumidifier between an ambient temperature range of 5-32°C.

Poor dehumidification results

| Is the temperature or humidity of the room too low?| Low humidity reduces dehumidifying effectiveness.

Is the Air Outlet or Air Intake clogged?

| Remove the items blocking the Air Outlet and Air Intake.

No air comes out

| Is the Air Intake blocked?| ****

Clear the items blocking the Air Intake.

The Unit makes operating noises

| Is the Unit placed on a slope or uneven surface that causes it to tilt or wobble?| Place the Unit on a stable and levelled surface.

Is the Air Intake blocked?

| ****

Clear the items blocking the Air Intake.

The sound of flowing water

| This is caused by the flow of refrigerant inside the Unit.

Water leakage

| ****

The drain hose is loosely attached

| ****

Securely insert the drain hose.

The Drainage system is blocked

| ****

Unclog the hose.

Frosted up

| Low ambient temperature causing the Unit to activate the defrost operation.| This is not a malfunction the defrosting operation could be activated by the Drying Inside Operation.
2. Error message code description
Code| Description
---|---
FL| Water Tank Full alarm
E1| Coil Sensor failure
E2| Ambient Temperature Sensor failure
P1| Defrosting Operation activated
CL| Drying Inside Operation activated
LC| Child Lock Mode activated

Specifications

1. Product Parameters****
   Model| RAD-Y200H| 50| 300
   ---|---|---|---
   Power Supply| 220V ~ 50Hz
   Dehumidification
   Capacity
   (Litre per day)

| 26.7°C 60%| 12| 14.9| 18
30°C 80%| 21| 27| 30
Power
Consumption
(W)| 26.7°C 60%| 215| 269| 298
30°C 80%| 265| 319| 358
Water Tank Capacity (L)| 4.0
Overflow protection capacity (L)| 3.7
Weight (kg)| 14.5| 14.5| 14.5
Dimensions (mm) (WxD xH)| 350X 260X560
Operating temperature range| 5℃~32℃

The dehumidification performance will be decreased after adding the 3-in-1 Multifunction filter.

2. Fuse Parameters
   • Voltage: 250 VAC
   • Current: 3.15A

Disposal
Please do not dispose of this Unit along with other unclassified garbage. This Unit should be placed separately for special usage. All data are given for reference only. Please note that technical upgrade may cause the product function to undergo changes without prior notice.

Frequently Asked Questions (FAQ)

1. What is the recommended operating humidity range for this product?
The recommended operating humidity range is between 30% and 80%.

2. How many fan speed levels does this product offer?
This product offers 3 fan speed levels for customized airflow.

3. Can I adjust the swing function of this device?
Yes, you can adjust the swing function of the device using the control provided.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>