B O Beoplay E8 2.0 Wireless Earbuds User Guide

June 3, 2024
B O

Beoplay E8 2.0 Wireless Earbuds
User Guide

Bang & Olufsen App

B O Beoplay E8 2.0 Wireless Earbuds - Figure 1 Use the Bang & Olufsen App for setup, product customization and music enhancing features.

Box Overview

B O Beoplay E8 2.0 Wireless Earbuds - Figure 2 The box contains the Beoplay E8 2.0 wireless earphones, a charging case, a USB-C charging cable, silicone tips in four sizes and Comply tips.

Comply™ Tip

B O Beoplay E8 2.0 Wireless Earbuds - Figure 3

Beoplay E8 2.0 contains Silicone tips and Comply tips with extra secure fit and a SweatGuard™ membrane that prevents humidity and wax from entering the sound port. Beoplay E8 2.0 is fitted with medium Silicone tips out of the box. When using the Comply™ foam tips, squeeze down the foam tip and roll the tip into a thin, round cylinder. Pull back and up on the ear into the canal.
Gently insert the entire tip into the ear. Hold the tip in place until it expands. See www.complyfoam.com for more information.

First time use

B O Beoplay E8 2.0 Wireless Earbuds - Figure 4 For first time use after unpacking, charge the case and earphones using the USB cable or the wireless charger for at least 10 minutes. Do not take the earphones out during this time.
If the earphones are at low battery, 20 minutes in the charging case equals up to 1 hour of playtime.
Charging – EarphonesB O Beoplay E8 2.0 Wireless Earbuds - Figure
5 To charge the earphones, place them in the charging case and close the lid. The indicator nside the charging case flashes orange when charging, and turns green when fully charged. Charging time is approximately 2 hours for 4 hours of playtime.

B O Beoplay E8 2.0 Wireless Earbuds - Figure 6 A fully charged case provides 3 extra earphone charges when on-the-go. The number of lights indicates the charging case battery status when the earphones are placed in the case.
Charging – charging case …B O Beoplay E8 2.0 Wireless Earbuds - Figure
7 Charge the case using the USB cable connected to a computer or wall charger. Each indicator at the back of the charging case flashes white when charging and turns solid white when fully charged. Charging time is approximately 2 hours.

B O Beoplay E8 2.0 Wireless Earbuds - Figure 8 Alternatively, charge the case using a wireless charging pad. Place the case on the charging surface and ensure both the charger and case are in the charging mode as indicated by their respective indicators. The charging case indicator flashes white when charging and turns solid white when fully charged. Charging time is approximately 3 hours.
Turn onB O Beoplay E8 2.0 Wireless Earbuds - Figure
9 Remove earphones from the charging case and tap the right earphone to turn it on. The product indicator turns white, a sound is heard, and the product is ready for use.
Bluetooth pairing …B O Beoplay E8 2.0 Wireless Earbuds - Figure
10 Beoplay E8 2.0 is ready for Bluetooth pairing when unpack from box. Turn on Bluetooth on your device and select Beoplay E8 2.0. Alternatively, keep a distance of less than 20 cm between the left and right earphones, touch and hold both for 5 seconds to initiate Bluetooth pairing. The indicator starts flashing blue and a sound prompt is heard. Turn on Bluetooth on your device and select Beoplay E8 2.0.
B O Beoplay E8 2.0 Wireless Earbuds - Figure 11 Beoplay E8 2.0 remembers previously connected devices. When turned on, Beoplay E8 2.0 attempts to reconnect to previously connected devices.
Insert earphonesB O Beoplay E8 2.0 Wireless Earbuds - Figure
12

Call/music operations

| Left| Right
---|---|---
|
Play/pause ( )| | x1
Next track ( )| | x2
Previous track ( )| x2|
Volume control ( )| (-) touch&hold| (+) touch&hold
Transparency ( )| x1|
Voice activation (  )| | x3
Incoming call ( )| x1 or| x1
Reject call ( )| hold 0:05 or| hold 0:05
End call ( )| x2 or| x2

Playing music …B O Beoplay E8 2.0 Wireless Earbuds - Figure
15 Tap and hold the left or right earphone to adjust volume.

B O Beoplay E8 2.0 Wireless Earbuds - Figure 16 Tap the right earphone to pause or resume playback.

B O Beoplay E8 2.0 Wireless Earbuds - Figure 17 Double tap the left earphone to skip to the previous song and double tap the right earphone to skip to the next song during music playback.
Calling B O Beoplay E8 2.0 Wireless Earbuds - Figure
18For incoming calls, tap either one of the earphones to accept or hold for 5 seconds to reject. During a call, double tap either one of the earphones to terminate call or triple tap to transfer audio from Beoplay E8 2.0 to the connected device.
TransparencyB O Beoplay E8 2.0 Wireless Earbuds - Figure
19 Tap the left earphone to enable/disable Transparency.
Voice activationB O Beoplay E8 2.0 Wireless Earbuds - Figure
20 Triple tap the right earphone for voice activation.

Register Online

Register online at www.bang-olufsen.com/register-product to receive important information about product and software updates – and to get exciting news and offers from the BANG & OLUFSEN Group. If you have purchased your product at a BANG & OLUFSEN store or at www.bangolufsen.com, you have automatically been registered

www.bang-olufsen.com/support/beoplay-e8-2

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals