B O Beoplay E8 2.0 User Guide

June 3, 2024
B O

Beoplay E8 2.0
User Guide

Bang & Olufsen AppB O Beoplay E8 2.0 User

Bang-Olufsen.com/APP

Use the Bang & Olufsen App for setup, product customization and music enhancing features.

Box Overview

The box contains the Beoplay E8 2.0 wireless earphones, a charging case, a USB-C charging cable, silicone tips in four sizes and Comply tips.
Comply ™TipB O Beoplay E8 2.0 User - fig 1

Beoplay E8 2.0 contains Silicone tips and Comply tips with extra secure fit and a SweatGuard TM membrane that prevents humidity and wax from entering the sound port. Beoplay E8 2.0 is fitted with medium Silicone tips out of the box. When using the Comply TM foam tips, squeeze down the foam tip and roll the tip into a thin, round cylinder. Pull back and up on the ear into the canal. Gently insert the entire tip into the ear. Hold the tip in place until it expands. See www.complyfoam.com for more information.
First time useB O Beoplay E8 2.0 User - fig 2 For first time use after unpacking, charge the case and earphones using the USB cable or the wireless charger for at least 10 minutes. Do not take the earphones out during this time. If the earphones are at low battery, 20 minutes in the charging case equals up to 1 hour of playtime.

Charging – Earphones

B O Beoplay E8 2.0 User - Charging

To charge the earphones, place them in the charging case and close the lid. The indicator inside the charging case flashes orange when charging, and turns green when fully charged. Charging time is approximately 2 hours for 4 hours of playtime.
Charging – EarphonesB O Beoplay E8 2.0 User - Charging
1

A fully charged case provides 3 extra earphone charges when on-the-go. The number of lights indicates the charging case battery status when the earphones are placed in the case.

Charging – charging case …B O Beoplay E8 2.0 User - Charging
3

Charge the case using the USB cable connected to a computer or wall charger. Each indicator at the back of the charging case flashes white when charging and turns solid white when fully charged.  Charging time is approximately 2 hours.
… Charging – charging caseB O Beoplay E8 2.0 User - Charging
4

Alternatively, charge the case using a wireless charging pad. Place the case on the charging surface and ensure both the charger and case are in the charging mode as indicated by their respective indicators. The charging case indicator flashes white when charging and turns solid white when fully charged. Charging time is approximately 3 hours
Turn onB O Beoplay E8 2.0 User - Charging 5

Remove earphones from the charging case and tap the right earphone to turn it on. The product indicator turns white, a sound is heard, and the product is ready for use.

Bluetooth pairing …

B O Beoplay E8 2.0 User - Bluetooth5

Beoplay E8 2.0 is ready for Bluetooth pairing when unpack from box. Turn on Bluetooth on your device and select Beoplay E8 2.0. Alternatively, keep a distance of less than 20 cm between the left and right earphones, touch and hold both for 5 seconds to initiate Bluetooth pairing. The indicator starts flashing blue and a sound prompt is heard. Turn on Bluetooth on your device and select Beoplay E8 2.0.
… Bluetooth pairingB O Beoplay E8 2.0 User -
Bluetoothd4

Beoplay E8 2.0 remembers previously connected devices. When turned on, Beoplay E8 2.0 attempts to reconnect to previously connected devices.

Insert earphones

B O Beoplay E8 2.0 User - earphones3

Call/music operations

| Left| Right
---|---|---
Play/pause ( )| | x1
Next track (
)| | x2
Previous track ( ****)| x2|
Volume control ( )| (-) touch&hold| (+) touch&hold
Transparency ( )| x1|
Voice activation ( )| | x3
Incoming call ( )| x1 or| x1
Reject call ( )| hold 0:05 or| hold 0:05
End call ( )| x2 or| x2

Playing music …B O Beoplay E8 2.0 User - Charging
ds Tap and hold the left or right earphone to adjust volume.

Playing music …

B O Beoplay E8 2.0 User - Charging dsw

Tap the right earphone to pause or resume playback.
… Playing musicB O Beoplay E8 2.0 User - Charfging
1

Double tap the left earphone to skip to the previous song and double tap the right earphone to skip to the next song during music playback.
CallingB O Beoplay E8 2.0 User - Calling1 For incoming calls, tap either one of the earphones to accept or hold for 5 seconds to reject. During a call, double tap either one of the earphones to terminate call or triple tap to transfer audio from Beoplay E8 2.0 to the connected device.

Transparency

B O Beoplay E8 2.0 User - Transparency1

Tap the left earphone to enable/disable Transparency.
Voice activationB O Beoplay E8 2.0 User - Voice
activation

Triple tap the right earphone for voice activation.

Tilmeld Dig Online
Register Online
Online Registreren
Registo Online
Register online at www.bang-olufsen.com/register-product to receive important information about product and software updates – and to get exciting news and offers from the BANG & OLUFSEN Group. If you have purchased your product at a BANG & OLUFSEN store or at www.bangolufsen.com, you have automatically been registered

www.bang-olufsen.com/support/beoplay-e8-2

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals