B O Beoplay E6 In Ear Wireless Earphones User Guide
- June 4, 2024
- B O
Table of Contents
Beoplay E6
User Guide
Beoplay E6 In-Ear Wireless Earphones
Use the Beoplay app to personalize your listening experience, and interact and update your product.
The box contains Beoplay E6 wireless earphones, a charger, two cable clips, four silicone Ear fins, Silicone tips in four sizes and Comply tips.
|
---|---
Charge the earphones using the charger connected to a computer or the wall charger. The indicator flashes orange when charging, and turns solid green when it is fully charged.
Short press the center button to turn on the earphones. The product indicator turns white, a sound is heard, and the product is ready for use.
Press and hold the center button for over 5 seconds to initiate Bluetooth
pairing. Turn on Bluetooth on your device, and select Beoplay E6. The product
indicator turns white momentarily when successful. The indicator turns red
momentarily if unsuccessful.
Beoplay E6 remembers previously connected devices. When turned on, Beoplay E6
attempts to reconnect to previously connected devices.
To turn off the earphones, connect the two magnetic ends of the earbuds. A
sound is heard, and the indicator fades out.
Beoplay E6 automatically turns off when inactive for over 15 minutes. Beoplay
E6 can be worn around the neck by connecting the two earbuds.
The remote can be used for music and calls. Long press the center button until a sound is heard to activate voice recognition. During incoming calls, short press the center button to accept or long press to reject. During a call, long press to terminate and double press to transfer audio from Beoplay E6 to the device.
When the indicator turns red and a sound is heard, the battery is below 10%. Charge the battery using the charging unit. The battery level is also shown on the paired iOS devices next to the Bluetooth icon.
|
---|---
Beoplay E6 is fitted with medium Ear fins and medium Silicone tips out of the box. When using the Comply™ foam tips, squeeze down the foam tip and roll the tip into a thin, round cylinder. Pull back and up on the ear into the canal.
The earphone clip can be attached to Beoplay E6 to shorten the cord to your
preferred length.
If an error occurs, the product indicator on Beoplay E6 will flash red. To
reset Beoplay E6 to factory settings, press and hold the volume up and volume
down buttons for more than 5 seconds.
Update Beoplay E6 software using the Beoplay app. For more support visit
http://www.beoplay.com/support/
TILMELD DIG ONLINE
REGISTER ONLINE
Register online at
www.beoplay.com/register to receive
important information about product and software updates – and to get exciting
news and offers from the BANG & OLUFSEN Group. If you have purchased your
product at a BANG & OLUFSEN store or at
www.beoplay.com , you have automatically been
registered at
www.beoplay.com/e6/learnmore
Documents / Resources
| B O
Beoplay E6 In Ear Wireless
Earphones
[pdf] User Guide
Beoplay E6 In Ear Wireless Earphones, Beoplay E6, In Ear Wireless Earphones,
Wireless Earphones, Earphones, E6 Earphones, Beoplay Earphones
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>