B O W HB186-3 Ultra-Slim Quiet 2.4Ghz Wireless Keyboard User Manual
- June 5, 2024
- B O W
Table of Contents
B O W HB186-3 Ultra-Slim Quiet 2.4Ghz Wireless Keyboard
Thank you for using the BOW keyboard, please read the manual carefully before using.
keyboard layout
One kind of Bluetooth settings with HID, support windows, Android and IOS
systems as inputting equipment.
Keyboard characteristic
- this keyboard cover is made of metal, using high-hardness aluminum alloy, and using sand finish oxidation, fashion and artistic shape, high-end and nice.
- support three Bluetooth channel connect at same time, but just can work well one channel one time. When using other equipment, you should change the channel.
- the key-caps with design concave surface changed the touching felling, and the Big R degree increase the visual effect.
- the keyboard support Windows, Android and IOS system, high compatibility.
Three Bluetooth pairings
it can be connected with three Bluetooth pairings at same time, and pressing which with no Bluetooth settings , it should be with one dongle to using.
Indicator
Bluetooth Pairing steps
- First: turn on the keyboard and all of three indicators will keep light 3 seconds and then extinguished.
- Second： pressing FN+ pairing key，the corresponding pairing indicator will flicker blue color
- Third: turn on the Bluetooth settings of tablet and then search, the tablet PC will show the B.O.W pairing name, clicking it and connected
- Fourth； when connected successfully, the indicator will be on all the time.
Shortcut key
Keyboard Specification
Saving energy module
it will be sleeping module when it do not has been any touched within 30
minutes, but it will be reworking when you press any key and waiting 5 second;
Keyboard will stop pairing when keyboard has not pairing succeed after 3
minutes later , and it need pressing FN+pairing again to pairing.
Charging
When the battery power is low, all of three Bluetooth channel indicator will be on at same time and flicker, its time to charge.
- Connect the B port of the origin USB wire to the keyboard charging port,
- Connect the A port to the power port or the electric USB port.
- When charging, the third channel will be red color until at the end of charging.
Tip
- To make thae battery much more lift time, it should be charged when the low power indicator light.
- When you are using the keyboard and charging at same time, please use the original USB wire, if the keyboard is used others USB wire to charge , maybe it be mistakes within working.
Safety Caution
Warning:
it can cause fire, electric shock, and damage of the keyboard system if
disobey the safety notes. Dangerous (be careful of highly dangerous ) Warning
(be careful of mid dangerous)
Caution (slight dangerous should be noted)
- Keep the keyboard away from sharp objects.
- Do not Microwave the keyboard.
- Do not place heavy object on the keyboard.
- Do not force or distorted the keyboard.
- Keep away from oil, chemical or any other organic liquid.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
- Shenzhen Hangshi Technology Co.,Ltd.
- ADD Hangshi Technology Park, G Area, Democracy West Industry park Shajing Baoan District Shenzhen China Web: www.bow.cn
- QQ group about exchange of skills: 211705564 Nationwide service volume line: 400-682-8008