B O W MD190 Wireless Mouse User Manual
- June 17, 2024
- B O W
Table of Contents
B O W MD190 Wireless Mouse
Thank you for using the mouse provided by us, please read this manual carefully before using this product.
Product Overview
| keyboard State | Indicator color | Indicator Status |
|---|---|---|
| Charging indicator | Red | When charging, the red light is steady on, and when |
it is full, it is turned off
Low power indicator| Red| When the voltage is lower than 3.3V, it blinks and
shuts down when it is lower than 3.0V
Channel indicator| White| Flash quickly when pairing, pairing successfully off
DPI indicator light
| Red| First gear flashes once, second gear flashes twice, Flashing three times in third gear, flashing four times in fourth gear
Power indicator
|
White
| If the device is not connected, the 2.4G channel indicator blinks three times to hibernate. The Bluetooth channel indicator light flashes three times in about 1 second and enters sleep in 120 seconds. The channel indicator of the connected device is on for about 3 seconds
Connection Mode
Turn on the power switch
Bluetooth channel
Press the channel switch key to switch to the Bluetooth channel, and then long press the channel switch key for 3 seconds, then the indicator light Blink quickly. Select the Bluetooth name of the mouse on the device for connection. After the connection is successful, the indicator goes off.
2.4Gpassage
- Open the top cover of the mouse, take out the adapter, cover the top cover of the mouse, and insert the adapter into the device.
- Pull the mouse switch, press the connection mode key, switch to USB mode can be used.
Mouse Parameter
| Connection mode | 2.4G+BT1+BT2 |
|---|---|
| Effective operating range | ＜10m |
| DPI Gear position | 800-1200-1600-2400 |
| Size | 1217773mm |
Product Warranty Description
When users use Hangshi products, the after-sales service is strictly in accordance with the “Consumer Rights Protection Law of the People’s Republic of China” and “Product Quality Law of the People’s Republic of China”After -sales threeguarantee service is implemented, and the service content is as follows:
- Within 7 DAYS from the day after you sign for receipt, if this product is not damaged by human or performance failure, the product can be returned or replaced free of charge after the inspection of the world’s after-sales service.
- Within 8 TO 30 days from the day after you sign for the receipt, if the product is damaged by non-human or performance failure, it will be confirmed by the after sale service of the HANGSHI, and you can enjoy the replacement or repair service free of charge.
- Within 12 months from the day after you sign for the receipt, if this product is damaged or has performance failure, it will be tested and confirmed by HangSHI after-sales service, and you can enjoy free maintenance service.
Non-Warranty Regulations
- Unauthorized Repair, Misuse, Crash, Negligence, Abuse, Fluid Ingress, Accident, Tear, Alteration.
- The validity period of three packs has exceeded.
- Damage caused by force majeure.
- The product cannot be used normally due to human reasons. Such as the use of non-rated voltage, use in non-specified environments, etc., resulting in product performance failures.
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Contact
Shenzhen Hangshi Technology Co.,Ltd.
- Address: Hangshi Technology Park, Shajing. bao’an District, Shenzhen, China.
- Website: www.bow.cn
- National Service Hotline: 400 682 8008
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>